Benchmark #25029 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#13 / 1,539
610
#828 / 1,539
#4 / 90
#8 / 86
4,005
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-21 09:12:05
#25,029
2,374
-1,631 (-68.70%)
GRILLEDSALMON
Adata Sp550 using unknown SATA to USB 3.0 adapter

Storage Details
Generic USB Disk
USB Flash
223.5G
USB Flash
Generic
GenericFlashDisk
2.10
480
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.7 MB/s
27.69 MB/s
28.75 MB/s
2,802 IOPS
2,557 IOPS
11,211 KB/s
10,228 KB/s
11,274 KB/s
9,414 KB/s
9,354 KB/s
11,139 KB/s

inxi Results
System: Kernel: 5.4.35-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=1b5780aa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1003.2 MiB used: 493.6 MiB (49.2%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.35-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 3.42 TiB used: 2.97 TiB (86.8%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Book 1140 drive model: WD30EZRX-00MMMB0 family: Green size: 2.73 TiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 1012 drive rev: 80.00A80 temp: 42 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 151d 18h cycles: 4761 ID-3: /dev/sdb type: USB model: USB3.0 high speed size: 223.57 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-4: /dev/sdd type: USB model: ATA ST500LT012-1DG14 drive model: ST500LT012-1DG142 family: Laptop HDD size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: SDM1 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 15d 18h cycles: 1361 read: 22.05 TiB written: 8.41 TiB Old-Age: g-sense error rate: 315 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.51 GiB size: 219.00 GiB (97.98%) used: 12.21 GiB (5.6%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 ID-2: /boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 7EF5-979D ID-3: /media/pi/01D56B4F428C7F70 raw size: 465.76 GiB size: 465.76 GiB (100.00%) used: 428.48 GiB (92.0%) fs: ntfs block size: 4096 B dev: /dev/sdd5 label: N/A uuid: 01D56B4F428C7F70 ID-4: /media/pi/139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 raw size: 14.77 GiB size: 14.42 GiB (97.61%) used: 11.17 GiB (77.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 ID-5: /media/pi/Nunquam Absens raw size: 746.43 GiB size: 746.43 GiB (100.00%) used: 742.47 GiB (99.5%) fs: ntfs block size: 4096 B dev: /dev/sda3 label: Nunquam Absens uuid: 01CDE0D57F5EAF60 ID-6: /media/pi/PhoenixDown raw size: 1.36 TiB size: 1.36 TiB (100.00%) used: 1.17 TiB (85.5%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: PhoenixDown uuid: 749C5D039C5CC172 ID-7: /media/pi/Viridis Pyxidis1 raw size: 650.64 GiB size: 650.64 GiB (100.00%) used: 648.25 GiB (99.6%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Viridis Pyxidis uuid: 20D07295D0727140 ID-8: /media/pi/boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 7EF5-979D Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 7.3 MiB (0.4%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdd1 size: 1 KiB fs: swap label: N/A uuid: 4450051a-86e0-4832-b2b6-7782fae587d2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:7 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 2537:1068 Device-3: 1-1.4:6 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 2109:0711 Device-4: 1-1.5:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:1140 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable main No active apt repos in: /etc/apt/sources.list.d/tvinternal.list Processes: CPU top: 5 1: cpu: 5.9% command: deluged started by: python pid: 1137 mem: 68.5 MiB (7.8%) 2: cpu: 2.5% command: lxpanel pid: 959 mem: 30.4 MiB (3.4%) 3: cpu: 1.6% command: deluge-web started by: python pid: 966 mem: 34.9 MiB (3.9%) 4: cpu: 1.6% command: lxterminal pid: 2198 mem: 26.3 MiB (3.0%) 5: cpu: 1.5% command: xorg pid: 765 mem: 78.3 MiB (8.9%) Memory top: 5 1: mem: 78.3 MiB (8.9%) command: xorg pid: 765 cpu: 1.5% 2: mem: 76.7 MiB (8.7%) command: teamviewer pid: 934 cpu: 0.4% 3: mem: 68.5 MiB (7.8%) command: deluged started by: python pid: 1137 cpu: 5.9% 4: mem: 48.7 MiB (5.5%) command: clipit pid: 1000 cpu: 0.1% 5: mem: 39.6 MiB (4.5%) command: light-locker pid: 993 cpu: 0.0% Info: Processes: 206 Uptime: 24m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.4.35-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=1b5780aa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1003.2 MiB used: 493.6 MiB (49.2%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.35-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 3.42 TiB used: 2.97 TiB (86.8%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Book 1140 
           drive model: WD30EZRX-00MMMB0 family: Green size: 2.73 TiB block size: physical: 4096 B 
           logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 1012 drive rev: 80.00A80 temp: 42 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 151d 18h cycles: 4761 
           ID-3: /dev/sdb type: USB model: USB3.0 high speed size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-4: /dev/sdd type: USB model: ATA ST500LT012-1DG14 drive model: ST500LT012-1DG142 
           family: Laptop HDD size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: SDM1 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 15d 18h cycles: 1361 read: 22.05 TiB 
           written: 8.41 TiB Old-Age: g-sense error rate: 315 Pre-Fail: 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.51 GiB size: 219.00 GiB (97.98%) used: 12.21 GiB (5.6%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 
           ID-2: /boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 7EF5-979D 
           ID-3: /media/pi/01D56B4F428C7F70 raw size: 465.76 GiB size: 465.76 GiB (100.00%) 
           used: 428.48 GiB (92.0%) fs: ntfs block size: 4096 B dev: /dev/sdd5 label: N/A 
           uuid: 01D56B4F428C7F70 
           ID-4: /media/pi/139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 raw size: 14.77 GiB 
           size: 14.42 GiB (97.61%) used: 11.17 GiB (77.4%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 
           ID-5: /media/pi/Nunquam Absens raw size: 746.43 GiB size: 746.43 GiB (100.00%) 
           used: 742.47 GiB (99.5%) fs: ntfs block size: 4096 B dev: /dev/sda3 
           label: Nunquam Absens uuid: 01CDE0D57F5EAF60 
           ID-6: /media/pi/PhoenixDown raw size: 1.36 TiB size: 1.36 TiB (100.00%) 
           used: 1.17 TiB (85.5%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: PhoenixDown 
           uuid: 749C5D039C5CC172 
           ID-7: /media/pi/Viridis Pyxidis1 raw size: 650.64 GiB size: 650.64 GiB (100.00%) 
           used: 648.25 GiB (99.6%) fs: ntfs block size: 4096 B dev: /dev/sda2 
           label: Viridis Pyxidis uuid: 20D07295D0727140 
           ID-8: /media/pi/boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) 
           fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 7EF5-979D 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 7.3 MiB (0.4%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/sdd1 size: 1 KiB fs: swap label: N/A 
           uuid: 4450051a-86e0-4832-b2b6-7782fae587d2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:7 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 2537:1068 Device-3: 1-1.4:6 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 2109:0711 Device-4: 1-1.5:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:1140 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable main
           No active apt repos in: /etc/apt/sources.list.d/tvinternal.list 
Processes: CPU top: 5 
           1: cpu: 5.9% command: deluged started by: python pid: 1137 mem: 68.5 MiB (7.8%) 
           2: cpu: 2.5% command: lxpanel pid: 959 mem: 30.4 MiB (3.4%) 
           3: cpu: 1.6% command: deluge-web started by: python pid: 966 mem: 34.9 MiB (3.9%) 
           4: cpu: 1.6% command: lxterminal pid: 2198 mem: 26.3 MiB (3.0%) 
           5: cpu: 1.5% command: xorg pid: 765 mem: 78.3 MiB (8.9%) 
           Memory top: 5 
           1: mem: 78.3 MiB (8.9%) command: xorg pid: 765 cpu: 1.5% 
           2: mem: 76.7 MiB (8.7%) command: teamviewer pid: 934 cpu: 0.4% 
           3: mem: 68.5 MiB (7.8%) command: deluged started by: python pid: 1137 cpu: 5.9% 
           4: mem: 48.7 MiB (5.5%) command: clipit pid: 1000 cpu: 0.1% 
           5: mem: 39.6 MiB (4.5%) command: light-locker pid: 993 cpu: 0.0% 
Info:      Processes: 206 Uptime: 24m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25029 - Brand: Generic USB Disk