Benchmark #25044 - pibenchmarks.com

Brand: SanDisk Cruzer Glide 3.0
USB Flash
#633 / 1,679
11
#1,450 / 1,679
#52 / 94
#50 / 89
893
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-21 11:51:43
#25,044
1,180
+287 (+24.32%)
Anonymous
ScanDisk Cruzer Glide 3.0 64GB

Storage Details
SanDisk Cruzer Glide 3.0
USB Flash
57.1G
USB Flash
SanDisk
CruzerGlide3.0
3.00
5,000
0781:5597
0x0781 (SanDisk Corp.)
0x5597
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
39.3 MB/s
95.42 MB/s
44.37 MB/s
594 IOPS
1,846 IOPS
2,378 KB/s
7,384 KB/s
18,522 KB/s
2,513 KB/s
7,224 KB/s
1,490 KB/s

inxi Results
System: Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1600x900M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash logo.nologo plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 667.2 MiB (16.7%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 422x237mm (16.6x9.3") s-diag: 484mm (19.1") Monitor-1: HDMI-1 res: 1600x900 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.115-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 87.03 GiB used: 5.26 GiB (6.0%) ID-1: /dev/mmcblk0 model: ABLCD size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide 3.0 size: 57.30 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.05 GiB size: 56.11 GiB (98.35%) used: 5.21 GiB (9.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.7 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 ID-2: swap-2 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram1 ID-3: swap-3 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap ID-4: swap-4 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram2 ID-5: swap-5 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram3 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 69D5-9B27 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5597 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/smos.list 1: deb https: //ppa.stellarmate.com/repos/apt/stable buster main Processes: CPU top: 5 1: cpu: 10.8% command: xorg pid: 549 mem: 53.1 MiB (1.4%) 2: cpu: 4.4% command: x11vnc pid: 885 mem: 23.7 MiB (0.6%) 3: cpu: 3.1% command: systemd pid: 1 mem: 8.53 MiB (0.2%) 4: cpu: 2.0% command: ekoslive pid: 4087 mem: 69.7 MiB (1.8%) 5: cpu: 1.1% command: python3 pid: 4412 mem: 24.6 MiB (0.6%) Memory top: 5 1: mem: 69.7 MiB (1.8%) command: ekoslive pid: 4087 cpu: 2.0% 2: mem: 62.0 MiB (1.6%) command: blueman-applet started by: python3 pid: 678 cpu: 0.4% 3: mem: 53.1 MiB (1.4%) command: xorg pid: 549 cpu: 10.8% 4: mem: 48.9 MiB (1.3%) command: nm-applet pid: 700 cpu: 0.2% 5: mem: 30.5 MiB (0.8%) command: lxpanel pid: 657 cpu: 0.5% Info: Processes: 186 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1600x900M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyS0,115200 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash logo.nologo plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 667.2 MiB (16.7%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 422x237mm (16.6x9.3") 
           s-diag: 484mm (19.1") 
           Monitor-1: HDMI-1 res: 1600x900 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.115-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 87.03 GiB used: 5.26 GiB (6.0%) 
           ID-1: /dev/mmcblk0 model: ABLCD size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide 3.0 size: 57.30 GiB 
           block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 57.05 GiB size: 56.11 GiB (98.35%) used: 5.21 GiB (9.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.7 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 
           dev: /dev/zram0 
           ID-2: swap-2 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 
           dev: /dev/zram1 
           ID-3: swap-3 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
           ID-4: swap-4 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 
           dev: /dev/zram2 
           ID-5: swap-5 type: zram size: 698.9 MiB used: 0 KiB (0.0%) priority: 100 
           dev: /dev/zram3 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 69D5-9B27 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.2 speed: 5 Gb/s chip ID: 0781:5597 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/smos.list 
           1: deb https: //ppa.stellarmate.com/repos/apt/stable buster main
Processes: CPU top: 5 
           1: cpu: 10.8% command: xorg pid: 549 mem: 53.1 MiB (1.4%) 
           2: cpu: 4.4% command: x11vnc pid: 885 mem: 23.7 MiB (0.6%) 
           3: cpu: 3.1% command: systemd pid: 1 mem: 8.53 MiB (0.2%) 
           4: cpu: 2.0% command: ekoslive pid: 4087 mem: 69.7 MiB (1.8%) 
           5: cpu: 1.1% command: python3 pid: 4412 mem: 24.6 MiB (0.6%) 
           Memory top: 5 
           1: mem: 69.7 MiB (1.8%) command: ekoslive pid: 4087 cpu: 2.0% 
           2: mem: 62.0 MiB (1.6%) command: blueman-applet started by: python3 pid: 678 cpu: 0.4% 
           3: mem: 53.1 MiB (1.4%) command: xorg pid: 549 cpu: 10.8% 
           4: mem: 48.9 MiB (1.3%) command: nm-applet pid: 700 cpu: 0.2% 
           5: mem: 30.5 MiB (0.8%) command: lxpanel pid: 657 cpu: 0.5% 
Info:      Processes: 186 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25044 - Brand: SanDisk Cruzer Glide 3.0