Benchmark #25066 - pibenchmarks.com

Brand: SanDisk Ultra CZ48 USB
USB Flash
#52 / 1,675
322
#1,372 / 1,675
#33 / 93
#35 / 89
1,078
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-21 14:22:08
#25,066
842
-236 (-28.03%)
Anonymous
pi 3bplus 3.0 usb stick

Storage Details
SanDisk Ultra CZ48 USB
USB Flash
28.6G
USB Flash
SanDisk
UltraUSB3.0
2.10
480
0781:5591
0x0781 (SanDisk Corp.)
0x5591 (SCL3711-NFC&RW)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
23.5 MB/s
28.63 MB/s
23.28 MB/s
450 IOPS
1,541 IOPS
1,800 KB/s
6,167 KB/s
11,447 KB/s
2,816 KB/s
5,420 KB/s
1,406 KB/s

inxi Results
System: Kernel: 4.14.98-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=926b0a96-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1003.2 MiB used: 314.8 MiB (31.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 107x14 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.14.98-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 28.65 GiB used: 4.05 GiB (14.2%) ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra USB 3.0 size: 28.65 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.61 GiB size: 28.03 GiB (97.99%) used: 4.03 GiB (14.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: meterkast uuid: d1e3bf8e-fa18-4246-8a83-ce05a4d29c19 ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 21.5 MiB (49.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: AF14-47C0 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:4 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5591 Hub: 1-1.5:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Hub: 1-1.5.4:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-3: 1-1.5.X.X:7 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-4: 1-1.5.X.X:8 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 20.6% command: domoticz pid: 1984 mem: 55.8 MiB (6.0%) 2: cpu: 7.6% command: [w1_bus_master1] pid: 193 mem: 0.00 MiB (0.0%) 3: cpu: 6.5% command: [kworker/1:2] pid: 21467 mem: 0.00 MiB (0.0%) 4: cpu: 3.9% command: [kworker/1:3] pid: 66 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: lxpanel pid: 995 mem: 24.6 MiB (2.6%) Memory top: 5 1: mem: 55.8 MiB (6.0%) command: domoticz pid: 1984 cpu: 20.6% 2: mem: 31.3 MiB (3.3%) command: xorg pid: 544 cpu: 0.0% 3: mem: 30.9 MiB (3.3%) command: xvnc-core pid: 639 cpu: 0.1% 4: mem: 24.6 MiB (2.6%) command: lxpanel pid: 995 cpu: 0.2% 5: mem: 24.3 MiB (2.6%) command: lxpanel pid: 1697 cpu: 0.2% Info: Processes: 190 Uptime: 54m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.14.98-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=926b0a96-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1003.2 MiB used: 314.8 MiB (31.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 107x14 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.14.98-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 28.65 GiB used: 4.05 GiB (14.2%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra USB 3.0 size: 28.65 GiB 
           block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.61 GiB size: 28.03 GiB (97.99%) used: 4.03 GiB (14.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: meterkast 
           uuid: d1e3bf8e-fa18-4246-8a83-ce05a4d29c19 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 21.5 MiB (49.8%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: AF14-47C0 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:4 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5591 Hub: 1-1.5:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Hub: 1-1.5.4:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-3: 1-1.5.X.X:7 info: Future Devices FT232 Serial (UART) IC 
           type:  driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0403:6001 Device-4: 1-1.5.X.X:8 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 20.6% command: domoticz pid: 1984 mem: 55.8 MiB (6.0%) 
           2: cpu: 7.6% command: [w1_bus_master1] pid: 193 mem: 0.00 MiB (0.0%) 
           3: cpu: 6.5% command: [kworker/1:2] pid: 21467 mem: 0.00 MiB (0.0%) 
           4: cpu: 3.9% command: [kworker/1:3] pid: 66 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: lxpanel pid: 995 mem: 24.6 MiB (2.6%) 
           Memory top: 5 
           1: mem: 55.8 MiB (6.0%) command: domoticz pid: 1984 cpu: 20.6% 
           2: mem: 31.3 MiB (3.3%) command: xorg pid: 544 cpu: 0.0% 
           3: mem: 30.9 MiB (3.3%) command: xvnc-core pid: 639 cpu: 0.1% 
           4: mem: 24.6 MiB (2.6%) command: lxpanel pid: 995 cpu: 0.2% 
           5: mem: 24.3 MiB (2.6%) command: lxpanel pid: 1697 cpu: 0.2% 
Info:      Processes: 190 Uptime: 54m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

Benchmark #25066 - Brand: SanDisk Ultra CZ48 USB