Benchmark #25186 - pibenchmarks.com

Brand: Samsung SD EVO+ (GB1QT)
C10 U1
#82 / 1,675
193
#1,393 / 1,675
#249 / 391
1,049
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-22 13:50:23
#25,186
863
-186 (-21.55%)
texspeed
Samsung EVO Select SD card Pi 3B+

Secure Digital (SD) Card Details
Samsung SD EVO+ (GB1QT)
C10 U1
29.6G
SD
Samsung
GB1QT
SDHC
3.00
0x1b
SM
3.0
12/2018
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
1 GB
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.3 MB/s
21.81 MB/s
21.5 MB/s
996 IOPS
2,226 IOPS
3,985 KB/s
8,905 KB/s
5,909 KB/s
3,242 KB/s
5,929 KB/s
1,819 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a22082 Memory: RAM: total: 1002.1 MiB used: 230.8 MiB (23.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1824x984 s-dpi: 96 s-size: 483x260mm (19.0x10.2") s-diag: 549mm (21.6") Monitor-1: default res: 1824x984 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::2265:a205:1458:c9c6/64 scope: link WAN IP: 47.187.X.X Drives: Local Storage: total: 29.81 GiB used: 3.07 GiB (10.3%) ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 29.04 GiB (98.26%) used: 3.02 GiB (10.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Avago Pte. ADNS-5700 Optical Mouse Controller (3-button) type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 192f:0416 Device-3: 1-1.3:5 info: Chicony HP Multimedia Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0841 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 5.6% command: init pid: 1 mem: 7.84 MiB (0.8%) 2: cpu: 3.5% command: lxterminal pid: 748 mem: 48.8 MiB (5.2%) 3: cpu: 3.4% command: pcmanfm pid: 598 mem: 28.1 MiB (3.0%) 4: cpu: 3.0% command: lxpanel pid: 597 mem: 27.9 MiB (3.0%) 5: cpu: 2.5% command: xorg pid: 446 mem: 56.1 MiB (6.0%) Memory top: 5 1: mem: 56.1 MiB (6.0%) command: xorg pid: 446 cpu: 2.5% 2: mem: 48.8 MiB (5.2%) command: lxterminal pid: 748 cpu: 3.5% 3: mem: 28.1 MiB (3.0%) command: pcmanfm pid: 598 cpu: 3.4% 4: mem: 27.9 MiB (3.0%) command: lxpanel pid: 597 cpu: 3.0% 5: mem: 14.7 MiB (1.5%) command: openbox pid: 592 cpu: 0.7% Info: Processes: 140 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.00

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 
  bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
  Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 
  rev: a22082 
Memory:
  RAM: total: 1002.1 MiB used: 230.8 MiB (23.0%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A 
  bogomips: 0 
  Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 
  3: 600 4: 600 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 1824x984 s-dpi: 96 s-size: 483x260mm (19.0x10.2") 
  s-diag: 549mm (21.6") 
  Monitor-1: default res: 1824x984 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.97-v7+ 
Network:
  Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
  type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
  IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::2265:a205:1458:c9c6/64 scope: link 
  WAN IP: 47.187.X.X 
Drives:
  Local Storage: total: 29.81 GiB used: 3.07 GiB (10.3%) 
  ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 29.56 GiB size: 29.04 GiB (98.26%) 
  used: 3.02 GiB (10.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 
  label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 6341-C9E5 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:9514 
  Device-1: 1-1.1:3 
  info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
  type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
  chip ID: 0424:ec00 
  Device-2: 1-1.2:4 
  info: Avago Pte. ADNS-5700 Optical Mouse Controller (3-button) type: Mouse 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
  chip ID: 192f:0416 
  Device-3: 1-1.3:5 info: Chicony HP Multimedia Keyboard type: Keyboard 
  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s 
  chip ID: 04f2:0841 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 5.6% command: init pid: 1 mem: 7.84 MiB (0.8%) 
  2: cpu: 3.5% command: lxterminal pid: 748 mem: 48.8 MiB (5.2%) 
  3: cpu: 3.4% command: pcmanfm pid: 598 mem: 28.1 MiB (3.0%) 
  4: cpu: 3.0% command: lxpanel pid: 597 mem: 27.9 MiB (3.0%) 
  5: cpu: 2.5% command: xorg pid: 446 mem: 56.1 MiB (6.0%) 
  Memory top: 5 
  1: mem: 56.1 MiB (6.0%) command: xorg pid: 446 cpu: 2.5% 
  2: mem: 48.8 MiB (5.2%) command: lxterminal pid: 748 cpu: 3.5% 
  3: mem: 28.1 MiB (3.0%) command: pcmanfm pid: 598 cpu: 3.4% 
  4: mem: 27.9 MiB (3.0%) command: lxpanel pid: 597 cpu: 3.0% 
  5: mem: 14.7 MiB (1.5%) command: openbox pid: 592 cpu: 0.7% 
Info:
  Processes: 140 Uptime: 1m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.00

Benchmark #25186 - Brand: Samsung SD EVO+ (GB1QT)