Benchmark #25194 - pibenchmarks.com

Brand: MyDigitalSSD Super Boot 2 M.2 SSD
SSD (M.2 SATA)
#1,341 / 1,679
1
#468 / 1,679
#452 / 984
#45 / 115
7,225
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-22 15:37:03
#25,194
7,225
0 (0.00%)
Anonymous
MyDigitalSSD SuperBootDrive 256GB M.2 NGFF SSD on Pi 4 using LM-711N USB3.0 to NGFF adapter

Storage Details
MyDigitalSSD Super Boot 2 M.2 SSD
SSD (M.2 SATA)
240G
SSD
MyDigitalSSD
SBM2SSD
M.2
SATA
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
161 MB/s
273.26 MB/s
255.29 MB/s
8,298 IOPS
19,504 IOPS
33,192 KB/s
78,019 KB/s
18,756 KB/s
23,364 KB/s
18,863 KB/s
27,912 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0b7ef368-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 464.7 MiB (11.7%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") diag: 604mm (23.8") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Use of uninitialized value in string ne at ./inxi line 9041. Drives: Local Storage: total: 238.03 GiB used: 7.66 GiB (3.2%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: SB M2 SSD size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: S9FM02.8 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4 hrs cycles: 47 written: 8.3 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.31 GiB size: 218.81 GiB (97.98%) used: 7.61 GiB (3.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech M105 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 Device-2: 1-1.4:4 info: Belkin Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1241:1503 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.0% command: [kworker/u8:3-events_unbound] pid: 2455 mem: 0.00 MiB (0.0%) 2: cpu: 1.1% command: packagekitd pid: 2375 mem: 13.1 MiB (0.3%) 3: cpu: 1.0% command: lxpanel pid: 659 mem: 28.5 MiB (0.7%) 4: cpu: 0.9% command: xorg pid: 528 mem: 46.2 MiB (1.2%) 5: cpu: 0.5% command: init pid: 1 mem: 7.88 MiB (0.2%) Memory top: 5 1: mem: 48.2 MiB (1.2%) command: lxterminal pid: 943 cpu: 0.2% 2: mem: 46.2 MiB (1.2%) command: xorg pid: 528 cpu: 0.9% 3: mem: 28.5 MiB (0.7%) command: lxpanel pid: 659 cpu: 1.0% 4: mem: 24.3 MiB (0.6%) command: pcmanfm pid: 661 cpu: 0.2% 5: mem: 15.5 MiB (0.4%) command: openbox pid: 655 cpu: 0.0% Info: Processes: 146 Uptime: 11m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=0b7ef368-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 464.7 MiB (11.7%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") 
           diag: 604mm (23.8") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Use of uninitialized value in string ne at ./inxi line 9041.
Drives:    Local Storage: total: 238.03 GiB used: 7.66 GiB (3.2%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: SB M2 SSD size: 223.57 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: S9FM02.8 temp: 30 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 4 hrs cycles: 47 written: 8.3 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.31 GiB size: 218.81 GiB (97.98%) used: 7.61 GiB (3.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 
           Device-2: 1-1.4:4 info: Belkin Keyboard type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1241:1503 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.0% command: [kworker/u8:3-events_unbound] pid: 2455 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.1% command: packagekitd pid: 2375 mem: 13.1 MiB (0.3%) 
           3: cpu: 1.0% command: lxpanel pid: 659 mem: 28.5 MiB (0.7%) 
           4: cpu: 0.9% command: xorg pid: 528 mem: 46.2 MiB (1.2%) 
           5: cpu: 0.5% command: init pid: 1 mem: 7.88 MiB (0.2%) 
           Memory top: 5 
           1: mem: 48.2 MiB (1.2%) command: lxterminal pid: 943 cpu: 0.2% 
           2: mem: 46.2 MiB (1.2%) command: xorg pid: 528 cpu: 0.9% 
           3: mem: 28.5 MiB (0.7%) command: lxpanel pid: 659 cpu: 1.0% 
           4: mem: 24.3 MiB (0.6%) command: pcmanfm pid: 661 cpu: 0.2% 
           5: mem: 15.5 MiB (0.4%) command: openbox pid: 655 cpu: 0.0% 
Info:      Processes: 146 Uptime: 11m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25194 - Brand: MyDigitalSSD Super Boot 2 M.2 SSD