Benchmark #25222 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#956 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-23 00:49:39
#25,222
2,557
-1,439 (-56.28%)
GRILLEDSALMON
ADATA SP550 ON PI 3B USING UNKNOWN SATA TO USB 3.0 ADAPTER

Storage Details
Generic USB Disk
USB Flash
223.5G
USB Flash
Generic
GenericFlashDisk
2.00
480
0424:0711
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
27.9 MB/s
27.31 MB/s
30.68 MB/s
2,870 IOPS
2,432 IOPS
11,481 KB/s
9,728 KB/s
11,306 KB/s
9,863 KB/s
9,992 KB/s
12,851 KB/s

inxi Results
System: Kernel: 5.4.35-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=1b5780aa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1003.2 MiB used: 463.4 MiB (46.2%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 120x30 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.35-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 3.42 TiB used: 2.97 TiB (87.0%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Book 1140 drive model: WD30EZRX-00MMMB0 family: Green size: 2.73 TiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 1012 drive rev: 80.00A80 temp: 51 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 152d 17h cycles: 4763 ID-3: /dev/sdb type: USB model: USB3.0 high speed size: 223.57 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-4: /dev/sdd type: USB model: ATA ST500LT012-1DG14 drive model: ST500LT012-1DG142 family: Laptop HDD size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: SDM1 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 17d 9h cycles: 1362 read: 22.06 TiB written: 8.41 TiB Old-Age: g-sense error rate: 315 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.51 GiB size: 219.00 GiB (97.98%) used: 12.49 GiB (5.7%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 ID-2: /boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 7EF5-979D ID-3: /media/pi/01D56B4F428C7F70 raw size: 465.76 GiB size: 465.76 GiB (100.00%) used: 428.48 GiB (92.0%) fs: ntfs block size: 4096 B dev: /dev/sdd5 label: N/A uuid: 01D56B4F428C7F70 ID-4: /media/pi/139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 raw size: 14.77 GiB size: 14.42 GiB (97.61%) used: 11.17 GiB (77.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 ID-5: /media/pi/Nunquam Absens raw size: 746.43 GiB size: 746.43 GiB (100.00%) used: 742.47 GiB (99.5%) fs: ntfs block size: 4096 B dev: /dev/sda3 label: Nunquam Absens uuid: 01CDE0D57F5EAF60 ID-6: /media/pi/PhoenixDown raw size: 1.36 TiB size: 1.36 TiB (100.00%) used: 1.17 TiB (86.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: PhoenixDown uuid: 749C5D039C5CC172 ID-7: /media/pi/Viridis Pyxidis1 raw size: 650.64 GiB size: 650.64 GiB (100.00%) used: 648.25 GiB (99.6%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Viridis Pyxidis uuid: 20D07295D0727140 ID-8: /media/pi/boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 7EF5-979D Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 56.5 MiB (2.8%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdd1 size: 1 KiB fs: swap label: N/A uuid: 4450051a-86e0-4832-b2b6-7782fae587d2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:7 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 2537:1068 Device-3: 1-1.4:6 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 2109:0711 Device-4: 1-1.5:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:1140 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable main Processes: CPU top: 5 1: cpu: 10.5% command: deluged started by: python pid: 1192 mem: 86.5 MiB (9.8%) 2: cpu: 3.2% command: sda1 started by: mount.ntfs pid: 1274 mem: 2.12 MiB (0.2%) 3: cpu: 2.2% command: lxpanel pid: 985 mem: 11.7 MiB (1.3%) 4: cpu: 0.9% command: rpimonitord started by: perl pid: 1071 mem: 10.2 MiB (1.1%) 5: cpu: 0.8% command: systemd-journald pid: 142 mem: 10.4 MiB (1.1%) Memory top: 5 1: mem: 86.5 MiB (9.8%) command: deluged started by: python pid: 1192 cpu: 10.5% 2: mem: 40.2 MiB (4.5%) command: xorg pid: 795 cpu: 0.2% 3: mem: 26.3 MiB (3.0%) command: deluge-web started by: python pid: 991 cpu: 0.0% 4: mem: 24.8 MiB (2.8%) command: pcmanfm pid: 986 cpu: 0.0% 5: mem: 19.5 MiB (2.2%) command: teamviewer pid: 4949 cpu: 0.2% Info: Processes: 195 Uptime: 5h 40m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.4.35-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=1b5780aa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1003.2 MiB used: 463.4 MiB (46.2%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 120x30 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.35-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 3.42 TiB used: 2.97 TiB (87.0%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Book 1140 
           drive model: WD30EZRX-00MMMB0 family: Green size: 2.73 TiB block size: physical: 4096 B 
           logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 1012 drive rev: 80.00A80 temp: 51 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 152d 17h cycles: 4763 
           ID-3: /dev/sdb type: USB model: USB3.0 high speed size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-4: /dev/sdd type: USB model: ATA ST500LT012-1DG14 drive model: ST500LT012-1DG142 
           family: Laptop HDD size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: SDM1 temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 17d 9h cycles: 1362 read: 22.06 TiB 
           written: 8.41 TiB Old-Age: g-sense error rate: 315 Pre-Fail: 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.51 GiB size: 219.00 GiB (97.98%) used: 12.49 GiB (5.7%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 
           ID-2: /boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 7EF5-979D 
           ID-3: /media/pi/01D56B4F428C7F70 raw size: 465.76 GiB size: 465.76 GiB (100.00%) 
           used: 428.48 GiB (92.0%) fs: ntfs block size: 4096 B dev: /dev/sdd5 label: N/A 
           uuid: 01D56B4F428C7F70 
           ID-4: /media/pi/139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 raw size: 14.77 GiB 
           size: 14.42 GiB (97.61%) used: 11.17 GiB (77.4%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 
           ID-5: /media/pi/Nunquam Absens raw size: 746.43 GiB size: 746.43 GiB (100.00%) 
           used: 742.47 GiB (99.5%) fs: ntfs block size: 4096 B dev: /dev/sda3 
           label: Nunquam Absens uuid: 01CDE0D57F5EAF60 
           ID-6: /media/pi/PhoenixDown raw size: 1.36 TiB size: 1.36 TiB (100.00%) 
           used: 1.17 TiB (86.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: PhoenixDown 
           uuid: 749C5D039C5CC172 
           ID-7: /media/pi/Viridis Pyxidis1 raw size: 650.64 GiB size: 650.64 GiB (100.00%) 
           used: 648.25 GiB (99.6%) fs: ntfs block size: 4096 B dev: /dev/sda2 
           label: Viridis Pyxidis uuid: 20D07295D0727140 
           ID-8: /media/pi/boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) 
           fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 7EF5-979D 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 56.5 MiB (2.8%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/sdd1 size: 1 KiB fs: swap label: N/A 
           uuid: 4450051a-86e0-4832-b2b6-7782fae587d2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:7 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 2537:1068 Device-3: 1-1.4:6 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 2109:0711 Device-4: 1-1.5:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:1140 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable main
Processes: CPU top: 5 
           1: cpu: 10.5% command: deluged started by: python pid: 1192 mem: 86.5 MiB (9.8%) 
           2: cpu: 3.2% command: sda1 started by: mount.ntfs pid: 1274 mem: 2.12 MiB (0.2%) 
           3: cpu: 2.2% command: lxpanel pid: 985 mem: 11.7 MiB (1.3%) 
           4: cpu: 0.9% command: rpimonitord started by: perl pid: 1071 mem: 10.2 MiB (1.1%) 
           5: cpu: 0.8% command: systemd-journald pid: 142 mem: 10.4 MiB (1.1%) 
           Memory top: 5 
           1: mem: 86.5 MiB (9.8%) command: deluged started by: python pid: 1192 cpu: 10.5% 
           2: mem: 40.2 MiB (4.5%) command: xorg pid: 795 cpu: 0.2% 
           3: mem: 26.3 MiB (3.0%) command: deluge-web started by: python pid: 991 cpu: 0.0% 
           4: mem: 24.8 MiB (2.8%) command: pcmanfm pid: 986 cpu: 0.0% 
           5: mem: 19.5 MiB (2.2%) command: teamviewer pid: 4949 cpu: 0.2% 
Info:      Processes: 195 Uptime: 5h 40m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25222 - Brand: Generic USB Disk