Benchmark #25236 - pibenchmarks.com

Brand: Intenso Top M.2 SSD
SSD (M.2 SATA)
#88 / 1,539
122
#368 / 1,539
#354 / 875
#44 / 112
6,974
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-23 05:41:31
#25,236
6,572
-402 (-6.12%)
Anonymous
Intenso protable ssd 128 gB

Storage Details
Intenso Top M.2 SSD
SSD (M.2 SATA)
128G
SSD
Intenso
JAJM600M128C
M.2
SATA
152d:0579
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0579 (CX7220)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
198 MB/s
183.07 MB/s
176.6 MB/s
6,499 IOPS
4,347 IOPS
25,998 KB/s
17,389 KB/s
27,661 KB/s
21,388 KB/s
14,818 KB/s
26,375 KB/s

inxi Results
System: Host: titan Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x1024M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0579:u console=ttyS0,115200 console=tty1 root=PARTUUID=97709165-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 506.1 MiB (12.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-a97eeaf13c91 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::42:84ff:fe28:19e/64 scope: link IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::7a83:9bc6:79a3:85b9/64 scope: link IF-ID-4: veth975d69a state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 212.237.X.X Use of uninitialized value in string ne at ./inxi line 9041. Use of uninitialized value in string ne at ./inxi line 9042. Drives: Local Storage: total: 178.72 GiB used: 15.69 GiB (8.8%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s drive rev: 0506 drive rev: S1022A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4 hrs cycles: 28 read: 1.0 MiB written: 1.4 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.07 GiB (98.39%) used: 7.82 GiB (6.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 15c33522-4b96-45be-bfed-b346dfc4ff2a ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /var/lib/docker/overlay2/299d2e8de3413c9d6060a8c12714829af44984ec8d0abf88e3a5b818a9750092/merged raw size: N/A size: 117.07 GiB used: 7.82 GiB (6.7%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech M-U0004 810-001317 [B110 Optical USB Mouse] type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c05b Device-2: 1-1.4:4 info: Chicony Genius LuxeMate i200 Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0402 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.0% command: [kworker/u8:0-events_unbound] pid: 11052 mem: 0.00 MiB (0.0%) 2: cpu: 1.7% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: xorg pid: 502 mem: 53.1 MiB (1.3%) 4: cpu: 0.9% command: systemd pid: 1 mem: 8.31 MiB (0.2%) 5: cpu: 0.8% command: packagekitd pid: 11293 mem: 13.0 MiB (0.3%) Memory top: 5 1: mem: 92.0 MiB (2.3%) command: pi-greeter pid: 717 cpu: 0.2% 2: mem: 57.0 MiB (1.4%) command: mysqld pid: 6289 cpu: 0.1% 3: mem: 55.9 MiB (1.4%) command: dockerd pid: 5444 cpu: 0.1% 4: mem: 53.1 MiB (1.3%) command: xorg pid: 502 cpu: 1.0% 5: mem: 32.1 MiB (0.8%) command: containerd pid: 5267 cpu: 0.2% Info: Processes: 143 Uptime: 28m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storeage.sh (sudo) running in: Storeage.sh (SSH) inxi: 3.1.00

inxi Results

System:    Host: titan Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x1024M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           usb-storage.quirks=152d:0579:u console=ttyS0,115200 console=tty1 root=PARTUUID=97709165-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 506.1 MiB (12.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-a97eeaf13c91 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X 
           IP v6: fe80::42:84ff:fe28:19e/64 scope: link 
           IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::7a83:9bc6:79a3:85b9/64 scope: link 
           IF-ID-4: veth975d69a state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-5: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 212.237.X.X 
Use of uninitialized value in string ne at ./inxi line 9041.
Use of uninitialized value in string ne at ./inxi line 9042.
Drives:    Local Storage: total: 178.72 GiB used: 15.69 GiB (8.8%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD size: 119.24 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s drive rev: 0506 
           drive rev: S1022A0 temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 4 hrs cycles: 28 read: 1.0 MiB written: 1.4 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.07 GiB (98.39%) used: 7.82 GiB (6.7%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 15c33522-4b96-45be-bfed-b346dfc4ff2a 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /var/lib/docker/overlay2/299d2e8de3413c9d6060a8c12714829af44984ec8d0abf88e3a5b818a9750092/merged 
           raw size: N/A size: 117.07 GiB used: 7.82 GiB (6.7%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech M-U0004 810-001317 [B110 Optical USB Mouse] type: Mouse driver: hid-generic,usbhid 
           interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c05b 
           Device-2: 1-1.4:4 info: Chicony Genius LuxeMate i200 Keyboard type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0402 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 152d:0579 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.0% command: [kworker/u8:0-events_unbound] pid: 11052 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.7% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: xorg pid: 502 mem: 53.1 MiB (1.3%) 
           4: cpu: 0.9% command: systemd pid: 1 mem: 8.31 MiB (0.2%) 
           5: cpu: 0.8% command: packagekitd pid: 11293 mem: 13.0 MiB (0.3%) 
           Memory top: 5 
           1: mem: 92.0 MiB (2.3%) command: pi-greeter pid: 717 cpu: 0.2% 
           2: mem: 57.0 MiB (1.4%) command: mysqld pid: 6289 cpu: 0.1% 
           3: mem: 55.9 MiB (1.4%) command: dockerd pid: 5444 cpu: 0.1% 
           4: mem: 53.1 MiB (1.3%) command: xorg pid: 502 cpu: 1.0% 
           5: mem: 32.1 MiB (0.8%) command: containerd pid: 5267 cpu: 0.2% 
Info:      Processes: 143 Uptime: 28m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storeage.sh (sudo) running in: Storeage.sh (SSH) inxi: 3.1.00

Benchmark #25236 - Brand: Intenso Top M.2 SSD