Benchmark #25301 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#8 / 1,539
826
#322 / 1,539
#308 / 875
#42 / 363
7,294
	Amazon.com AliExpress

Overview
2020-05-24 00:29:45
#25,301
9,617
+2,323 (+24.16%)
PEOPLE3D
Intel Optane MEMPEK1W032GA in Orico case

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
27G
SSD
JMicron
JMicronGeneric
3.00
5,000
152d:0583
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0583 (Digital Camera)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
200 MB/s
307.85 MB/s
307.03 MB/s
11,289 IOPS
23,089 IOPS
45,159 KB/s
92,356 KB/s
35,366 KB/s
31,470 KB/s
34,923 KB/s
34,514 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 337.8 MiB (8.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: veth1b30c6a state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 27.25 GiB used: 3.54 GiB (13.0%) ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 27.25 GiB block size: physical: 4096 B logical: 512 B rev: 2102 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 27.00 GiB size: 26.55 GiB (98.35%) used: 1.74 GiB (6.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/bb15fea00d7cc04f94fe35b3f8d843508538f858247d77ea9ff1a91635faac80/merged raw size: N/A size: 26.55 GiB used: 1.74 GiB (6.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: dockerd pid: 6518 mem: 66.5 MiB (1.7%) 2: cpu: 0.6% command: systemd pid: 1 mem: 8.31 MiB (0.2%) 3: cpu: 0.5% command: containerd pid: 6427 mem: 33.2 MiB (0.8%) 4: cpu: 0.4% command: [kworker/3:5-cgroup_destroy] pid: 458 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: dbus-daemon pid: 357 mem: 3.63 MiB (0.0%) Memory top: 5 1: mem: 66.5 MiB (1.7%) command: dockerd pid: 6518 cpu: 0.7% 2: mem: 33.2 MiB (0.8%) command: containerd pid: 6427 cpu: 0.5% 3: mem: 19.2 MiB (0.4%) command: /portainer pid: 8844 cpu: 0.1% 4: mem: 15.9 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 10777 cpu: 0.0% 5: mem: 13.4 MiB (0.3%) command: networkmanager pid: 10275 cpu: 0.0% Info: Processes: 140 Uptime: 1h 06m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 337.8 MiB (8.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: veth1b30c6a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 27.25 GiB used: 3.54 GiB (13.0%) 
           ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 27.25 GiB 
           block size: physical: 4096 B logical: 512 B rev: 2102 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 27.00 GiB size: 26.55 GiB (98.35%) used: 1.74 GiB (6.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/bb15fea00d7cc04f94fe35b3f8d843508538f858247d77ea9ff1a91635faac80/merged raw size: N/A size: 26.55 GiB used: 1.74 GiB (6.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: dockerd pid: 6518 mem: 66.5 MiB (1.7%) 
           2: cpu: 0.6% command: systemd pid: 1 mem: 8.31 MiB (0.2%) 
           3: cpu: 0.5% command: containerd pid: 6427 mem: 33.2 MiB (0.8%) 
           4: cpu: 0.4% command: [kworker/3:5-cgroup_destroy] pid: 458 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: dbus-daemon pid: 357 mem: 3.63 MiB (0.0%) 
           Memory top: 5 
           1: mem: 66.5 MiB (1.7%) command: dockerd pid: 6518 cpu: 0.7% 
           2: mem: 33.2 MiB (0.8%) command: containerd pid: 6427 cpu: 0.5% 
           3: mem: 19.2 MiB (0.4%) command: /portainer pid: 8844 cpu: 0.1% 
           4: mem: 15.9 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 10777 cpu: 0.0% 
           5: mem: 13.4 MiB (0.3%) command: networkmanager pid: 10275 cpu: 0.0% 
Info:      Processes: 140 Uptime: 1h 06m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25301 - Brand: Undentified JMicron USB to SATA Adapter