Benchmark #25307 - pibenchmarks.com

Brand: Kingston SSDNow V100
SSD (2.5" SATA)
#529 / 1,665
14
#989 / 1,665
#907 / 977
#328 / 370
3,204
	Amazon.com AliExpress Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-05-24 01:55:12
#25,307
3,876
+672 (+17.34%)
Anonymous
KINGSTON SV100S264G SSD on Pi 4 using Innostor Technology Corporation IS888 USB3.0 to SATA bridge

Storage Details
Kingston SSDNow V100
SSD (2.5" SATA)
16G
SSD
Kingston
SV100S264G
1d6b:0888
0x1d6b (Linux Foundation)
0x0888 (IS888 SATA Storage Controller)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
91.1 MB/s
124.47 MB/s
135.45 MB/s
2,549 IOPS
2,284 IOPS
10,197 KB/s
9,136 KB/s
27,696 KB/s
22,740 KB/s
9,230 KB/s
17,245 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=a9a56b23-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 300.8 MiB (7.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") s-diag: 777mm (30.6") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") diag: 685mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 61.50 GiB used: 7.35 GiB (11.9%) ID-1: /dev/mmcblk0 model: uSD size: 1.88 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Kingston model: SV100S264G size: 59.63 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Supported md-raid types: raid1 Device-1: md0 type: mdraid status: active Components: online: sda1~c0 mmcblk0p1~c1 Info: raid: mirror blocks: 524224 report: 2/2 UU chunk size: N/A super blocks: 1.0 Partition: ID-1: / raw size: 16.00 GiB size: 15.62 GiB (97.65%) used: 6.44 GiB (41.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: root uuid: 82fba78f-7b72-4612-93e0-f770f42e974b ID-2: /boot raw size: 511.9 MiB size: 510.9 MiB (99.80%) used: 52.7 MiB (10.3%) fs: vfat block size: 512 B dev: /dev/md0 label: boot uuid: C164-D523 ID-3: /home raw size: 40.00 GiB size: 39.12 GiB (97.81%) used: 882.4 MiB (2.2%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: home uuid: f9168498-f34a-4ce6-b3fd-4b898138638c Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech TrackMan Wheel type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c404 Device-2: 1-1.4:4 info: Cherry type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0180 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: Innostor IS888 SATA Storage Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1f75:0888 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //www.deb-multimedia.org buster main non-free 3: deb [trusted=yes] file: /home/root/repo local/ Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.3% command: xorg pid: 575 mem: 46.0 MiB (1.1%) 2: cpu: 1.0% command: packagekitd pid: 1529 mem: 13.1 MiB (0.3%) 3: cpu: 0.9% command: init pid: 1 mem: 7.95 MiB (0.2%) 4: cpu: 0.9% command: bash pid: 1322 mem: 2.80 MiB (0.0%) 5: cpu: 0.6% command: lxterminal pid: 1146 mem: 50.0 MiB (1.2%) Memory top: 5 1: mem: 50.0 MiB (1.2%) command: lxterminal pid: 1146 cpu: 0.6% 2: mem: 46.0 MiB (1.1%) command: xorg pid: 575 cpu: 1.3% 3: mem: 31.4 MiB (0.8%) command: lxpanel pid: 898 cpu: 0.3% 4: mem: 21.6 MiB (0.5%) command: pcmanfm pid: 900 cpu: 0.2% 5: mem: 15.7 MiB (0.4%) command: openbox pid: 895 cpu: 0.0% Info: Processes: 159 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=a9a56b23-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 300.8 MiB (7.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
           s-diag: 777mm (30.6") 
           Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") 
           diag: 685mm (27") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 61.50 GiB used: 7.35 GiB (11.9%) 
           ID-1: /dev/mmcblk0 model: uSD size: 1.88 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Kingston model: SV100S264G size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Supported md-raid types: raid1 
           Device-1: md0 type: mdraid status: active Components: online: sda1~c0 mmcblk0p1~c1 
           Info: raid: mirror blocks: 524224 report: 2/2 UU chunk size: N/A super blocks: 1.0 
Partition: ID-1: / raw size: 16.00 GiB size: 15.62 GiB (97.65%) used: 6.44 GiB (41.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: root 
           uuid: 82fba78f-7b72-4612-93e0-f770f42e974b 
           ID-2: /boot raw size: 511.9 MiB size: 510.9 MiB (99.80%) used: 52.7 MiB (10.3%) 
           fs: vfat block size: 512 B dev: /dev/md0 label: boot uuid: C164-D523 
           ID-3: /home raw size: 40.00 GiB size: 39.12 GiB (97.81%) used: 882.4 MiB (2.2%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: home 
           uuid: f9168498-f34a-4ce6-b3fd-4b898138638c 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech TrackMan Wheel type: Mouse driver: hid-generic,usbhid 
           interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c404 
           Device-2: 1-1.4:4 info: Cherry type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046a:0180 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: Innostor IS888 SATA Storage Controller type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1f75:0888 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //www.deb-multimedia.org buster main non-free
           3: deb [trusted=yes] file: /home/root/repo local/
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.3% command: xorg pid: 575 mem: 46.0 MiB (1.1%) 
           2: cpu: 1.0% command: packagekitd pid: 1529 mem: 13.1 MiB (0.3%) 
           3: cpu: 0.9% command: init pid: 1 mem: 7.95 MiB (0.2%) 
           4: cpu: 0.9% command: bash pid: 1322 mem: 2.80 MiB (0.0%) 
           5: cpu: 0.6% command: lxterminal pid: 1146 mem: 50.0 MiB (1.2%) 
           Memory top: 5 
           1: mem: 50.0 MiB (1.2%) command: lxterminal pid: 1146 cpu: 0.6% 
           2: mem: 46.0 MiB (1.1%) command: xorg pid: 575 cpu: 1.3% 
           3: mem: 31.4 MiB (0.8%) command: lxpanel pid: 898 cpu: 0.3% 
           4: mem: 21.6 MiB (0.5%) command: pcmanfm pid: 900 cpu: 0.2% 
           5: mem: 15.7 MiB (0.4%) command: openbox pid: 895 cpu: 0.0% 
Info:      Processes: 159 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25307 - Brand: Kingston SSDNow V100