Benchmark #25321 - pibenchmarks.com

Brand: Longsys Foresee eMMC (SLD32)
MMC (Embedded)
#544 / 1,679
16
#909 / 1,679
#32 / 75
#32 / 92
4,533

Overview
2020-05-24 05:15:42
#25,321
2,107
-2,426 (-115.14%)
ok
iuj

Storage Details
Longsys Foresee eMMC (SLD32)
MMC (Embedded)
28.7G
MMC
Foresee
SLD32
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Debian GNU/Linux bullseye/sid
armv7l

Benchmark Results
20.7 MB/s
17.87 MB/s
19.38 MB/s
3,059 IOPS
2,892 IOPS
12,237 KB/s
11,570 KB/s
9,115 KB/s
10,075 KB/s
9,119 KB/s
9,244 KB/s

inxi Results
System: Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Debian GNU/Linux bullseye/sid Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: b03111 Memory: RAM: total: 1.90 GiB used: 571.1 MiB (29.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth1458430 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth3e1fc21 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethbdb1ba6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethbf68f33 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethc47d817 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethc97366a state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethf7a8db9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 28.91 GiB used: 22.85 GiB (79.1%) ID-1: /dev/mmcblk0 model: SLD32G size: 28.91 GiB block size: physical: 512 B logical: 512 B rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.65 GiB size: 28.18 GiB (98.35%) used: 11.40 GiB (40.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/166d9fbf198eb5847edb9be91becc04f8e6e6ae2c41620b5c9289ab426783a71/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/6b9d6e82521b97f6330539667fc52044aa305f0810acfe2ffcb4cfba8a6b8a17/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/6bc3d22bd33f4f06e398d9f2bc55ee8e7e44bd208c034875d4d4f0f2125c561c/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/6e2e98166ba16ae8fa9665e4c4fa4881f35d79d6c9dd9de1c3e1b25756cffddf/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/7d4e53a6b88b4526d42f9fd4c3a84d5e89ae089551ef9c4bfcad5c552974fcca/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/804a3e813f2f21e25bff1efec546a9b64b6314db5170473b0b82bb93ca592f5a/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/8bdb0bd213c28da64e7a4a30728bccb9c902a800eb630813d3ef04652c112405/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/8e093efef7f210febd5eea8d9419816f63a383c169ed5ffaaf4cde09cfc260ea/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/b9ce058686a1fc24cefe23a132174d5885e40d6907ba16a841df6aa6a5740d1f/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/bf00d6284ab9346081154e54dac345a847fd9efbabae2e97ab748623e479b229/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //http.debian.net/debian/ testing main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 20.0% command: python3 pid: 4391 mem: 109.6 MiB (5.8%) 2: cpu: 19.1% command: java pid: 3926 mem: 126.2 MiB (6.7%) 3: cpu: 1.8% command: python3 pid: 1680 mem: 38.0 MiB (2.0%) 4: cpu: 1.7% command: dockerd pid: 712 mem: 64.6 MiB (3.4%) 5: cpu: 1.6% command: init pid: 1 mem: 7.32 MiB (0.3%) Memory top: 5 1: mem: 126.2 MiB (6.7%) command: java pid: 3926 cpu: 19.1% 2: mem: 109.6 MiB (5.8%) command: python3 pid: 4391 cpu: 20.0% 3: mem: 64.6 MiB (3.4%) command: dockerd pid: 712 cpu: 1.7% 4: mem: 40.4 MiB (2.1%) command: docker pid: 1241 cpu: 0.0% 5: mem: 38.0 MiB (2.0%) command: python3 pid: 1680 cpu: 1.8% Info: Processes: 221 Uptime: 4m Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 8/9 Client: shell wrapper v: 5.0.16-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Debian GNU/Linux bullseye/sid 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: b03111 
           Memory:    RAM: total: 1.90 GiB used: 571.1 MiB (29.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth1458430 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth3e1fc21 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethbdb1ba6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethbf68f33 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethc47d817 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethc97366a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethf7a8db9 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 28.91 GiB used: 22.85 GiB (79.1%) 
           ID-1: /dev/mmcblk0 model: SLD32G size: 28.91 GiB block size: physical: 512 B 
           logical: 512 B rev: 0x8 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.65 GiB size: 28.18 GiB (98.35%) used: 11.40 GiB (40.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/166d9fbf198eb5847edb9be91becc04f8e6e6ae2c41620b5c9289ab426783a71/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/6b9d6e82521b97f6330539667fc52044aa305f0810acfe2ffcb4cfba8a6b8a17/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/6bc3d22bd33f4f06e398d9f2bc55ee8e7e44bd208c034875d4d4f0f2125c561c/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/6e2e98166ba16ae8fa9665e4c4fa4881f35d79d6c9dd9de1c3e1b25756cffddf/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/7d4e53a6b88b4526d42f9fd4c3a84d5e89ae089551ef9c4bfcad5c552974fcca/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/804a3e813f2f21e25bff1efec546a9b64b6314db5170473b0b82bb93ca592f5a/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/8bdb0bd213c28da64e7a4a30728bccb9c902a800eb630813d3ef04652c112405/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/8e093efef7f210febd5eea8d9419816f63a383c169ed5ffaaf4cde09cfc260ea/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/b9ce058686a1fc24cefe23a132174d5885e40d6907ba16a841df6aa6a5740d1f/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/bf00d6284ab9346081154e54dac345a847fd9efbabae2e97ab748623e479b229/merged raw size: N/A size: 28.18 GiB used: 11.40 GiB (40.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //http.debian.net/debian/ testing main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 20.0% command: python3 pid: 4391 mem: 109.6 MiB (5.8%) 
           2: cpu: 19.1% command: java pid: 3926 mem: 126.2 MiB (6.7%) 
           3: cpu: 1.8% command: python3 pid: 1680 mem: 38.0 MiB (2.0%) 
           4: cpu: 1.7% command: dockerd pid: 712 mem: 64.6 MiB (3.4%) 
           5: cpu: 1.6% command: init pid: 1 mem: 7.32 MiB (0.3%) 
           Memory top: 5 
           1: mem: 126.2 MiB (6.7%) command: java pid: 3926 cpu: 19.1% 
           2: mem: 109.6 MiB (5.8%) command: python3 pid: 4391 cpu: 20.0% 
           3: mem: 64.6 MiB (3.4%) command: dockerd pid: 712 cpu: 1.7% 
           4: mem: 40.4 MiB (2.1%) command: docker pid: 1241 cpu: 0.0% 
           5: mem: 38.0 MiB (2.0%) command: python3 pid: 1680 cpu: 1.8% 
Info:      Processes: 221 Uptime: 4m Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 
           alt: 8/9 Client: shell wrapper v: 5.0.16-release inxi: 3.1.00

Benchmark #25321 - Brand: Longsys Foresee eMMC (SLD32)