Benchmark #25330 - pibenchmarks.com

Brand: Longsys Foresee eMMC (SLD64)
MMC (Embedded)
#453 / 1,679
23
#974 / 1,679
#50 / 75
#50 / 92
3,627

Overview
2020-05-24 06:28:39
#25,330
2,049
-1,578 (-77.01%)
Anonymous
Rock eMMC 64Gb

Storage Details
Longsys Foresee eMMC (SLD64)
MMC (Embedded)
57.4G
MMC
Foresee
SLD64
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.5 MB/s
22.11 MB/s
22.32 MB/s
2,942 IOPS
2,933 IOPS
11,770 KB/s
11,734 KB/s
8,871 KB/s
9,571 KB/s
8,802 KB/s
8,968 KB/s

inxi Results
System: Host: andros4 Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=b95a561e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.81 GiB used: 433.2 MiB (11.1%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 160x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IF-ID-2: eth0.101 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-3: eth0.102 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: eth0.103 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X WAN IP: 94.65.X.X Drives: Local Storage: total: 57.62 GiB used: 15.04 GiB (26.1%) ID-1: /dev/mmcblk0 model: SLD64G size: 57.62 GiB block size: physical: 512 B logical: 512 B rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.36 GiB size: 56.40 GiB (98.32%) used: 14.98 GiB (26.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/connectify.list 1: deb http://apt.connectify.me/ speedify main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.7% command: ffmpeg pid: 1779 mem: 16.0 MiB (0.4%) 2: cpu: 6.5% command: ffmpeg pid: 7291 mem: 13.5 MiB (0.3%) 3: cpu: 0.6% command: packagekitd pid: 11059 mem: 12.2 MiB (0.3%) 4: cpu: 0.3% command: xorg pid: 1114 mem: 53.3 MiB (1.4%) 5: cpu: 0.3% command: bash pid: 10839 mem: 2.85 MiB (0.0%) Memory top: 5 1: mem: 68.6 MiB (1.8%) command: pi-greeter pid: 1288 cpu: 0.2% 2: mem: 53.3 MiB (1.4%) command: xorg pid: 1114 cpu: 0.3% 3: mem: 49.7 MiB (1.3%) command: rpc.statd pid: 858 cpu: 0.0% 4: mem: 27.2 MiB (0.7%) command: systemd-journald pid: 150 cpu: 0.0% 5: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 864 cpu: 0.0% Info: Processes: 185 Uptime: 20h 07m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.1.00

inxi Results

System:    Host: andros4 Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=tty1 root=PARTUUID=b95a561e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
Memory:    RAM: total: 3.81 GiB used: 433.2 MiB (11.1%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 160x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
           IF-ID-2: eth0.101 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-3: eth0.102 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-4: eth0.103 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-5: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
           WAN IP: 94.65.X.X 
Drives:    Local Storage: total: 57.62 GiB used: 15.04 GiB (26.1%) 
           ID-1: /dev/mmcblk0 model: SLD64G size: 57.62 GiB block size: physical: 512 B logical: 512 B 
           rev: 0x8 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 57.36 GiB size: 56.40 GiB (98.32%) used: 14.98 GiB (26.6%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/connectify.list 
           1: deb http://apt.connectify.me/ speedify main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.7% command: ffmpeg pid: 1779 mem: 16.0 MiB (0.4%) 
           2: cpu: 6.5% command: ffmpeg pid: 7291 mem: 13.5 MiB (0.3%) 
           3: cpu: 0.6% command: packagekitd pid: 11059 mem: 12.2 MiB (0.3%) 
           4: cpu: 0.3% command: xorg pid: 1114 mem: 53.3 MiB (1.4%) 
           5: cpu: 0.3% command: bash pid: 10839 mem: 2.85 MiB (0.0%) 
           Memory top: 5 
           1: mem: 68.6 MiB (1.8%) command: pi-greeter pid: 1288 cpu: 0.2% 
           2: mem: 53.3 MiB (1.4%) command: xorg pid: 1114 cpu: 0.3% 
           3: mem: 49.7 MiB (1.3%) command: rpc.statd pid: 858 cpu: 0.0% 
           4: mem: 27.2 MiB (0.7%) command: systemd-journald pid: 150 cpu: 0.0% 
           5: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 864 cpu: 0.0% 
Info:      Processes: 185 Uptime: 20h 07m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh inxi: 3.1.00

Benchmark #25330 - Brand: Longsys Foresee eMMC (SLD64)