Benchmark #25391 - pibenchmarks.com

Brand: Team L5 3D Lite Series
SSD (2.5" SATA)
#566 / 1,672
13
#706 / 1,672
#683 / 983
#198 / 370
5,900
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-24 19:22:29
#25,391
6,551
+651 (+9.94%)
Anonymous

Storage Details
Team L5 3D Lite Series
SSD (2.5" SATA)
240G
SSD
Team
L5Lite3D240G
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
185 MB/s
161.28 MB/s
163.28 MB/s
5,224 IOPS
5,719 IOPS
20,897 KB/s
22,876 KB/s
26,737 KB/s
24,794 KB/s
20,742 KB/s
25,614 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u,152d:1561:u console=ttyS0,115200 console=tty1 root=PARTUUID=c4e3431b-06 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 305.3 MiB (7.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 115x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 253.38 GiB used: 6.49 GiB (2.6%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: External USB3.0 drive model: L5Lite3D240G size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0204 drive rev: Q0410A scheme: MBR SMART: yes state: enabled health: PASSED on: 30d 11h cycles: 235 read: 58 KiB written: 295 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.47 GiB size: 219.84 GiB (98.37%) used: 6.44 GiB (2.9%) fs: ext4 block size: 4096 B dev: /dev/sda6 label: root uuid: 07b28313-7450-4f3d-926e-f8e3cdb75de1 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 2B4E-B719 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0062-1083 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 3412d9bd-6f63-4b3e-9438-c7e3583992c0 ID-4: /dev/sda1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 26EA-35EB ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 5a2a6cb7-b878-4b0d-a65c-2cf659428142 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.1% command: lxpanel pid: 631 mem: 28.2 MiB (0.7%) 2: cpu: 2.0% command: [kworker/u8:0-events_unbound] pid: 5278 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: xorg pid: 505 mem: 45.7 MiB (1.1%) 4: cpu: 0.9% command: init pid: 1 mem: 8.15 MiB (0.2%) 5: cpu: 0.6% command: smartd pid: 6108 mem: 3.25 MiB (0.0%) Memory top: 5 1: mem: 45.7 MiB (1.1%) command: xorg pid: 505 cpu: 1.0% 2: mem: 28.2 MiB (0.7%) command: lxpanel pid: 631 cpu: 2.1% 3: mem: 21.3 MiB (0.5%) command: pcmanfm pid: 632 cpu: 0.1% 4: mem: 17.9 MiB (0.4%) command: vncserver-x11-core pid: 470 cpu: 0.0% 5: mem: 14.4 MiB (0.3%) command: openbox pid: 626 cpu: 0.0% Info: Processes: 166 Uptime: 10m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u,152d:1561:u 
           console=ttyS0,115200 console=tty1 root=PARTUUID=c4e3431b-06 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 305.3 MiB (7.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 115x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 253.38 GiB used: 6.49 GiB (2.6%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: External USB3.0 drive model: L5Lite3D240G 
           size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rev: 0204 drive rev: Q0410A scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 30d 11h cycles: 235 read: 58 KiB 
           written: 295 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.47 GiB size: 219.84 GiB (98.37%) used: 6.44 GiB (2.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda6 label: root 
           uuid: 07b28313-7450-4f3d-926e-f8e3cdb75de1 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 2B4E-B719 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0062-1083 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 3412d9bd-6f63-4b3e-9438-c7e3583992c0 
           ID-4: /dev/sda1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 26EA-35EB 
           ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 5a2a6cb7-b878-4b0d-a65c-2cf659428142 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.1% command: lxpanel pid: 631 mem: 28.2 MiB (0.7%) 
           2: cpu: 2.0% command: [kworker/u8:0-events_unbound] pid: 5278 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: xorg pid: 505 mem: 45.7 MiB (1.1%) 
           4: cpu: 0.9% command: init pid: 1 mem: 8.15 MiB (0.2%) 
           5: cpu: 0.6% command: smartd pid: 6108 mem: 3.25 MiB (0.0%) 
           Memory top: 5 
           1: mem: 45.7 MiB (1.1%) command: xorg pid: 505 cpu: 1.0% 
           2: mem: 28.2 MiB (0.7%) command: lxpanel pid: 631 cpu: 2.1% 
           3: mem: 21.3 MiB (0.5%) command: pcmanfm pid: 632 cpu: 0.1% 
           4: mem: 17.9 MiB (0.4%) command: vncserver-x11-core pid: 470 cpu: 0.0% 
           5: mem: 14.4 MiB (0.3%) command: openbox pid: 626 cpu: 0.0% 
Info:      Processes: 166 Uptime: 10m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25391 - Brand: Team L5 3D Lite Series