Benchmark #25418 - pibenchmarks.com

Brand: Crucial BX500 Series
SSD (2.5" SATA)
#5 / 1,677
1,145
#620 / 1,677
#598 / 984
#145 / 370
6,340
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-25 04:44:13
#25,418
8,517
+2,177 (+25.56%)
Anonymous

Storage Details
Crucial BX500 Series
SSD (2.5" SATA)
120G
SSD
Crucial
CT120BX500SSD1
2.5 inch
SATA
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
194 MB/s
23.59 MB/s
22.85 MB/s
8,597 IOPS
22,480 IOPS
34,391 KB/s
89,923 KB/s
31,336 KB/s
27,127 KB/s
21,519 KB/s
33,262 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=579ab85c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 684.4 MiB (17.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 97x58 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-2e15bcfc1cae state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-4: veth2a98ea6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth6505d02 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth660ad98 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth7c48e21 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth9dcf7c3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vetheadc495 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethfaeec7f state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 111.79 GiB used: 14.23 GiB (12.7%) ID-1: /dev/sda type: USB vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0414 drive rev: M6CR013 temp: 42 C scheme: MBR SMART: yes state: enabled health: PASSED on: 6d 17h cycles: 130 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 7.09 GiB (6.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 ID-3: /var/lib/docker/overlay2/016db6f445e2953d38cf47cacf4974c3bbe87f295b0146e9b08e1c673666fb90/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/0822b828fa98a48a95d8637e5c11c0330e21c5efeac624e7e02bb66d6d80268a/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/2833f9fab5afadcfe5d8b94491dcb882bf251fe87d2b7d3d3da144be0bfb31ec/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/9391855960c6e910d53b2e7fea37a0451df8c13ad2973bfc74428daa128c7a67/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/ae10d6a14128e618c7501ce7986a24c9c34018befd45010db953eb4f4207cb46/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/ca20d36ec3de9ff5c973c0b80ebd17025f62e75ab2dbd640c4262a1f187ac33d/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/f07648b710fd57b4fd7171f00997cdb6685ddeeec07553cdebdc9bea33acf977/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.4% command: influxd pid: 1646 mem: 96.6 MiB (2.4%) 2: cpu: 1.0% command: packagekitd pid: 29637 mem: 12.9 MiB (0.3%) 3: cpu: 0.5% command: [kworker/2:1+events_freezable] pid: 29094 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: [kworker/2:2-events] pid: 26149 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: bash pid: 29406 mem: 2.84 MiB (0.0%) Memory top: 5 1: mem: 96.6 MiB (2.4%) command: influxd pid: 1646 cpu: 2.4% 2: mem: 70.1 MiB (1.7%) command: node-red pid: 2683 cpu: 0.0% 3: mem: 64.2 MiB (1.6%) command: dockerd pid: 458 cpu: 0.2% 4: mem: 56.3 MiB (1.4%) command: mysqld pid: 2657 cpu: 0.1% 5: mem: 47.8 MiB (1.2%) command: xorg pid: 541 cpu: 0.0% Info: Processes: 189 Uptime: 2d 18h 01m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=579ab85c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 684.4 MiB (17.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 97x58 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-2e15bcfc1cae state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-4: veth2a98ea6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth6505d02 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth660ad98 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth7c48e21 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth9dcf7c3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vetheadc495 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethfaeec7f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 14.23 GiB (12.7%) 
           ID-1: /dev/sda type: USB vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB 
           block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0414 drive rev: M6CR013 temp: 42 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 6d 17h cycles: 130 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 7.09 GiB (6.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 
           ID-3: /var/lib/docker/overlay2/016db6f445e2953d38cf47cacf4974c3bbe87f295b0146e9b08e1c673666fb90/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/0822b828fa98a48a95d8637e5c11c0330e21c5efeac624e7e02bb66d6d80268a/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/2833f9fab5afadcfe5d8b94491dcb882bf251fe87d2b7d3d3da144be0bfb31ec/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/9391855960c6e910d53b2e7fea37a0451df8c13ad2973bfc74428daa128c7a67/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/ae10d6a14128e618c7501ce7986a24c9c34018befd45010db953eb4f4207cb46/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/ca20d36ec3de9ff5c973c0b80ebd17025f62e75ab2dbd640c4262a1f187ac33d/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/f07648b710fd57b4fd7171f00997cdb6685ddeeec07553cdebdc9bea33acf977/merged raw size: N/A size: 109.28 GiB used: 7.09 GiB (6.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.4% command: influxd pid: 1646 mem: 96.6 MiB (2.4%) 
           2: cpu: 1.0% command: packagekitd pid: 29637 mem: 12.9 MiB (0.3%) 
           3: cpu: 0.5% command: [kworker/2:1+events_freezable] pid: 29094 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: [kworker/2:2-events] pid: 26149 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: bash pid: 29406 mem: 2.84 MiB (0.0%) 
           Memory top: 5 
           1: mem: 96.6 MiB (2.4%) command: influxd pid: 1646 cpu: 2.4% 
           2: mem: 70.1 MiB (1.7%) command: node-red pid: 2683 cpu: 0.0% 
           3: mem: 64.2 MiB (1.6%) command: dockerd pid: 458 cpu: 0.2% 
           4: mem: 56.3 MiB (1.4%) command: mysqld pid: 2657 cpu: 0.1% 
           5: mem: 47.8 MiB (1.2%) command: xorg pid: 541 cpu: 0.0% 
Info:      Processes: 189 Uptime: 2d 18h 01m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #25418 - Brand: Crucial BX500 Series