Benchmark #25443 - pibenchmarks.com

Brand: Generic SSD
SSD (Portable)
#2 / 1,702
2,242
#239 / 1,702
#237 / 990
#3 / 145
19,242
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-25 11:19:10
#25,443
7,527
-11,715 (-155.64%)
Anonymous

Storage Details
Generic SSD
SSD (Portable)
120G
SSD
Generic
GenericSSD
2.5 inch
SATA
3.00
5,000
0411:02d0
0x0411 (BUFFALO INC. (formerly MelCo., Inc.))
0x02d0 (DCP-1510)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
188 MB/s
249.78 MB/s
236.08 MB/s
7,191 IOPS
20,459 IOPS
28,764 KB/s
81,838 KB/s
29,722 KB/s
23,227 KB/s
20,795 KB/s
27,041 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=f278f658-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 1.02 GiB (26.2%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 168x43 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v4: type: secondary noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 1.93 TiB used: 912.65 GiB (46.2%) ID-1: /dev/sda type: USB vendor: Buffalo model: SSD-PGU3-A size: 111.79 GiB block size: physical: 4096 B logical: 512 B rev: 0000 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb type: USB vendor: Western Digital model: WD20SPZX-22UA7T0 size: 1.82 TiB block size: physical: 4096 B logical: 512 B rotation: 5400 rpm scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 13.87 GiB (12.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /mnt/HDD raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 898.73 GiB (48.2%) fs: exfat block size: 4096 B dev: /dev/sdb1 label: HV620S uuid: 5E88-BD06 Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: BUFFALO (formerly Mel ) type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0411:02d0 Device-2: 2-2:3 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 125f:a64a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //download.webmin.com/download/repository sarge contrib 3: deb http: //www.gyfgafguf.dk/raspbian/forked-daapd/ buster contrib Active apt repos in: /etc/apt/sources.list.d/gitlab_ce.list 1: deb https: //packages.gitlab.com/gitlab/raspberry-pi2/debian/ jessie main 2: deb-src https: //packages.gitlab.com/gitlab/raspberry-pi2/debian/ jessie main Active apt repos in: /etc/apt/sources.list.d/gitlab_gitlab-ce.list 1: deb https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main 2: deb-src https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb/ public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable main Active apt repos in: /etc/apt/sources.list.d/zabbix.list 1: deb http: //repo.zabbix.com/zabbix/4.2/raspbian stretch main 2: deb-src http: //repo.zabbix.com/zabbix/4.2/raspbian stretch main Processes: CPU top: 5 1: cpu: 33.7% command: deluged started by: python pid: 1015 mem: 65.1 MiB (1.8%) 2: cpu: 27.5% command: stats.cgi pid: 7581 mem: 27.6 MiB (0.7%) 3: cpu: 22.6% command: sdb1 started by: mount.exfat-fuse pid: 282 mem: 6.57 MiB (0.1%) 4: cpu: 7.3% command: [kswapd0] pid: 47 mem: 0.00 MiB (0.0%) 5: cpu: 4.4% command: smbd pid: 3940 mem: 7.30 MiB (0.2%) Memory top: 5 1: mem: 65.1 MiB (1.8%) command: deluged started by: python pid: 1015 cpu: 33.7% 2: mem: 47.5 MiB (1.3%) command: mysqld pid: 602 cpu: 0.1% 3: mem: 35.7 MiB (1.0%) command: deluge-web started by: python pid: 1026 cpu: 0.6% 4: mem: 27.6 MiB (0.7%) command: stats.cgi pid: 7581 cpu: 27.5% 5: mem: 24.3 MiB (0.6%) command: plex pid: 1368 cpu: 0.7% Info: Processes: 189 Uptime: 31m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1280 
           bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=f278f658-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 1.02 GiB (26.2%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 168x43 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v4:  type: secondary noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 1.93 TiB used: 912.65 GiB (46.2%) 
           ID-1: /dev/sda type: USB vendor: Buffalo model: SSD-PGU3-A size: 111.79 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0000 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb type: USB vendor: Western Digital model: WD20SPZX-22UA7T0 size: 1.82 TiB 
           block size: physical: 4096 B logical: 512 B rotation: 5400 rpm scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 13.87 GiB (12.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /mnt/HDD raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 898.73 GiB (48.2%) 
           fs: exfat block size: 4096 B dev: /dev/sdb1 label: HV620S uuid: 5E88-BD06 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: BUFFALO (formerly Mel ) type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0411:02d0 Device-2: 2-2:3 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 125f:a64a Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //download.webmin.com/download/repository sarge contrib
           3: deb http: //www.gyfgafguf.dk/raspbian/forked-daapd/ buster contrib
           Active apt repos in: /etc/apt/sources.list.d/gitlab_ce.list 
           1: deb https: //packages.gitlab.com/gitlab/raspberry-pi2/debian/ jessie main
           2: deb-src https: //packages.gitlab.com/gitlab/raspberry-pi2/debian/ jessie main
           Active apt repos in: /etc/apt/sources.list.d/gitlab_gitlab-ce.list 
           1: deb https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main
           2: deb-src https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb/ public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/zabbix.list 
           1: deb http: //repo.zabbix.com/zabbix/4.2/raspbian stretch main
           2: deb-src http: //repo.zabbix.com/zabbix/4.2/raspbian stretch main
Processes: CPU top: 5 
           1: cpu: 33.7% command: deluged started by: python pid: 1015 mem: 65.1 MiB (1.8%) 
           2: cpu: 27.5% command: stats.cgi pid: 7581 mem: 27.6 MiB (0.7%) 
           3: cpu: 22.6% command: sdb1 started by: mount.exfat-fuse pid: 282 mem: 6.57 MiB (0.1%) 
           4: cpu: 7.3% command: [kswapd0] pid: 47 mem: 0.00 MiB (0.0%) 
           5: cpu: 4.4% command: smbd pid: 3940 mem: 7.30 MiB (0.2%) 
           Memory top: 5 
           1: mem: 65.1 MiB (1.8%) command: deluged started by: python pid: 1015 cpu: 33.7% 
           2: mem: 47.5 MiB (1.3%) command: mysqld pid: 602 cpu: 0.1% 
           3: mem: 35.7 MiB (1.0%) command: deluge-web started by: python pid: 1026 cpu: 0.6% 
           4: mem: 27.6 MiB (0.7%) command: stats.cgi pid: 7581 cpu: 27.5% 
           5: mem: 24.3 MiB (0.6%) command: plex pid: 1368 cpu: 0.7% 
Info:      Processes: 189 Uptime: 31m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25443 - Brand: Generic SSD