Benchmark #25581 - pibenchmarks.com

Brand: Asenno ASP1 Portable SSD
SSD (Portable)
#719 / 1,539
5
#515 / 1,539
#495 / 875
#83 / 137
6,152
	Amazon.com AliExpress Amazon.ca Amazon.co.jp Amazon.com.au Amazon.sg

Overview
2020-05-26 10:45:52
#25,581
6,529
+377 (+5.77%)
Anonymous
Noname mini SSD

Storage Details
Asenno ASP1 Portable SSD
SSD (Portable)
120G
SSD
Asenno
ASP1120GB
2.5 inch
SATA
3.00
5,000
1d6b:0715
0x1d6b (Linux Foundation)
0x0715 (VL817 SATA Adaptor)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,750 (+250)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
166 MB/s
258.42 MB/s
197.82 MB/s
5,863 IOPS
4,361 IOPS
23,452 KB/s
17,444 KB/s
29,601 KB/s
26,105 KB/s
16,838 KB/s
28,386 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 276.2 MiB (13.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 111.79 GiB used: 3.06 GiB (2.7%) ID-1: /dev/sda type: USB model: ASP1 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: S050 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.42%) used: 3.01 GiB (2.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Genesys Logic Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-1: 1-1.4.1:4 info: Avago Pte. ADNS-5700 Optical Mouse Controller (3-button) type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 192f:0416 Device-2: 1-1.4.2:5 info: Chicony type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0404 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.0% command: speed.bash started by: mousepad pid: 2971 mem: 29.3 MiB (1.5%) 2: cpu: 1.4% command: [usb-storage] pid: 76 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: xorg pid: 490 mem: 47.7 MiB (2.4%) 4: cpu: 0.8% command: init pid: 1 mem: 8.12 MiB (0.4%) 5: cpu: 0.8% command: packagekitd pid: 3136 mem: 13.2 MiB (0.6%) Memory top: 5 1: mem: 48.4 MiB (2.4%) command: lxterminal pid: 831 cpu: 0.2% 2: mem: 47.7 MiB (2.4%) command: xorg pid: 490 cpu: 1.0% 3: mem: 29.3 MiB (1.5%) command: speed.bash started by: mousepad pid: 2971 cpu: 4.0% 4: mem: 29.2 MiB (1.5%) command: lxpanel pid: 601 cpu: 0.3% 5: mem: 25.4 MiB (1.3%) command: pcmanfm pid: 602 cpu: 0.3% Info: Processes: 147 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 276.2 MiB (13.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") 
           diag: 686mm (27") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 3.06 GiB (2.7%) 
           ID-1: /dev/sda type: USB model: ASP1 120GB size: 111.79 GiB block size: physical: 512 B 
           logical: 512 B rev: S050 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.42%) used: 3.01 GiB (2.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Genesys Logic Hub ports: 2 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-1: 1-1.4.1:4 info: Avago Pte. ADNS-5700 Optical Mouse Controller (3-button) 
           type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
           chip ID: 192f:0416 
           Device-2: 1-1.4.2:5 info: Chicony type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0404 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0715 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.0% command: speed.bash started by: mousepad pid: 2971 mem: 29.3 MiB (1.5%) 
           2: cpu: 1.4% command: [usb-storage] pid: 76 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: xorg pid: 490 mem: 47.7 MiB (2.4%) 
           4: cpu: 0.8% command: init pid: 1 mem: 8.12 MiB (0.4%) 
           5: cpu: 0.8% command: packagekitd pid: 3136 mem: 13.2 MiB (0.6%) 
           Memory top: 5 
           1: mem: 48.4 MiB (2.4%) command: lxterminal pid: 831 cpu: 0.2% 
           2: mem: 47.7 MiB (2.4%) command: xorg pid: 490 cpu: 1.0% 
           3: mem: 29.3 MiB (1.5%) command: speed.bash started by: mousepad pid: 2971 cpu: 4.0% 
           4: mem: 29.2 MiB (1.5%) command: lxpanel pid: 601 cpu: 0.3% 
           5: mem: 25.4 MiB (1.3%) command: pcmanfm pid: 602 cpu: 0.3% 
Info:      Processes: 147 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25581 - Brand: Asenno ASP1 Portable SSD