Benchmark #25619 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#955 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-26 18:21:09
#25,619
4,951
+955 (+19.29%)
Anonymous
THU 120GB SSD 3D NAND SATA III 2.5 inch using KUNOVA UASP USB 3.0 TO SATA 22Pin Adapter

Storage Details
Generic USB Disk
USB Flash
111.6G
USB Flash
Generic
GenericFlashDisk
3.00
5,000
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
92.6 MB/s
143.75 MB/s
132.65 MB/s
5,886 IOPS
4,326 IOPS
23,546 KB/s
17,304 KB/s
24,013 KB/s
18,418 KB/s
13,106 KB/s
22,988 KB/s

inxi Results
System: Kernel: 5.3.0-1023-raspi2 aarch64 bits: 64 compiler: gcc v: 7.5.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.78 GiB used: 374.5 MiB (9.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 141x25 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: Hauppauge type: USB driver: au0828,snd-usb-audio bus ID: 1-1.2.3:6 chip ID: 2040:7200 Server: ALSA v: k5.3.0-1023-raspi2 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 171.42 GiB used: 2.54 GiB (1.5%) ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB3.0 high speed size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.41%) used: 2.43 GiB (2.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 115.4 MiB (45.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 85F3-CC2B Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p1 size: 255.0 MiB fs: vfat label: system-boot uuid: 85F3-CC2B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0209 Hub: 1-1.2.1:4 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0209 Device-1: 1-1.2.2:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Device-2: 1-1.2.3:6 info: Hauppauge type: driver: au0828,snd-usb-audio interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 2040:7200 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 045b:0210 Hub: 2-2.1:3 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 045b:0210 Device-3: 2-2.4:4 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 14.7% command: dvblast pid: 1528 mem: 3.61 MiB (0.0%) 2: cpu: 10.5% command: udpxy pid: 1651 mem: 0.09 MiB (0.0%) 3: cpu: 0.7% command: init pid: 1 mem: 8.71 MiB (0.2%) 4: cpu: 0.5% command: [kworker/3:2-eve] pid: 158 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 18.6 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 1550 cpu: 0.0% 2: mem: 15.9 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 1521 cpu: 0.0% 3: mem: 13.2 MiB (0.3%) command: systemd-journald pid: 827 cpu: 0.0% 4: mem: 12.6 MiB (0.3%) command: colord pid: 1575 cpu: 0.0% 5: mem: 8.71 MiB (0.2%) command: init pid: 1 cpu: 0.7% Info: Processes: 150 Uptime: 19m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.3.0-1023-raspi2 aarch64 bits: 64 compiler: gcc v: 7.5.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable 
           rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.78 GiB used: 374.5 MiB (9.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 141x25 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: Hauppauge type: USB driver: au0828,snd-usb-audio bus ID: 1-1.2.3:6 
           chip ID: 2040:7200 Server: ALSA v: k5.3.0-1023-raspi2 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 171.42 GiB used: 2.54 GiB (1.5%) 
           ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB3.0 high speed size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.41%) used: 2.43 GiB (2.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 115.4 MiB (45.8%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 85F3-CC2B 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p1 size: 255.0 MiB fs: vfat label: system-boot uuid: 85F3-CC2B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0209 
           Hub: 1-1.2.1:4 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0209 
           Device-1: 1-1.2.2:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Device-2: 1-1.2.3:6 info: Hauppauge type:  
           driver: au0828,snd-usb-audio interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 2040:7200 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 045b:0210 
           Hub: 2-2.1:3 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 045b:0210 
           Device-3: 2-2.4:4 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 14.7% command: dvblast pid: 1528 mem: 3.61 MiB (0.0%) 
           2: cpu: 10.5% command: udpxy pid: 1651 mem: 0.09 MiB (0.0%) 
           3: cpu: 0.7% command: init pid: 1 mem: 8.71 MiB (0.2%) 
           4: cpu: 0.5% command: [kworker/3:2-eve] pid: 158 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 18.6 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1550 cpu: 0.0% 
           2: mem: 15.9 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 1521 
           cpu: 0.0% 
           3: mem: 13.2 MiB (0.3%) command: systemd-journald pid: 827 cpu: 0.0% 
           4: mem: 12.6 MiB (0.3%) command: colord pid: 1575 cpu: 0.0% 
           5: mem: 8.71 MiB (0.2%) command: init pid: 1 cpu: 0.7% 
Info:      Processes: 150 Uptime: 19m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 
           alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

Benchmark #25619 - Brand: Generic USB Disk