Benchmark #25765 - pibenchmarks.com

Brand: Western Digital Red 2.5" NAS HDD
HDD (2.5" SATA)
#1,043 / 1,679
3
#1,198 / 1,679
#46 / 69
#9 / 20
1,477
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-28 12:10:09
#25,765
1,166
-311 (-26.67%)
Anonymous
OldServer

Storage Details
Western Digital Red 2.5" NAS HDD
HDD (2.5" SATA)
750G
HDD
WDC
WD7500BFCX-68N6GN0
SATA
5,400
None

System Board Details
1,008

Operating System

Debian GNU/Linux 8 (jessie)
armv7l

Benchmark Results
35.4 MB/s
113.63 MB/s
151.32 MB/s
555 IOPS
565 IOPS
2,222 KB/s
2,261 KB/s
36,708 KB/s
14,396 KB/s
589 KB/s
1,953 KB/s

inxi Results
System: Kernel: 3.4.113-bananian armv7l bits: 32 compiler: gcc v: 4.9.2 parameters: console=ttyS0,115200 console=tty0 console=tty1 sunxi_g2d_mem_reserve=0 sunxi_ve_mem_reserve=0 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1680x1050p60 root=/dev/sda1 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: N/A Distro: Debian GNU/Linux 8 (jessie) Machine: Type: ARM Device System: sun7i rev: N/A Battery: ID-1: battery charge: 100% condition: N/A/0.0 Wh volts: N/A/0.0 model: battery type: Li-ion N/A status: Full Memory: RAM: total: 970.4 MiB used: 237.5 MiB (24.5%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Dual Core model: ARMv7 v7l bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 4023 Speed: 1008 MHz min/max: 60/1008 MHz Core speeds (MHz): 1: 1008 2: 1008 Features: edsp fastmult half idiva idivt neon swp thumb tls vfp vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Message: No ARM data found for this feature. Display: server: No display server data found. Headless machine? tty: 85x53 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: No ARM data found for this feature. Device-1: sunxi-CODEC driver: sunxi-CODEC message: bus/chip ids unavailable Sound Server: ALSA v: 1.0.25 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: tunl0 state: down mac: WAN IP: Drives: Local Storage: total: 713.47 GiB used: 133.77 GiB (18.7%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda vendor: Western Digital model: WD7500BFCX-68N6GN0 size: 698.64 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm rev: 82.0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 344d 8h cycles: 19 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 50.00 GiB size: 49.22 GiB (98.43%) used: 3.99 GiB (8.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: root uuid: b773f3ca-d2f1-4d64-8c8f-024d8d1da19e ID-2: /home//data raw size: 648.64 GiB size: 638.46 GiB (98.43%) used: 129.78 GiB (20.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: data uuid: a5a8218f-f150-40bc-b9af-b15fcf0d4334 Swap: Kernel: swappiness: 1 (default 60) cache pressure: 50 (default 100) ID-1: swap-1 type: file size: 512.0 MiB used: 24 KiB (0.0%) priority: -1 file: /swapfile1 Unmounted: ID-1: /dev/mmcblk0p1 size: 20.0 MiB fs: vfat label: N/A uuid: BCCA-7937 ID-2: /dev/mmcblk0p2 size: 1.75 GiB fs: ext4 label: root uuid: a1ab4975-dd32-4d7c-b905-ae9274165e0d USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ftp.de.debian.org/debian/ jessie main non-free contrib 2: deb-src http: //ftp.de.debian.org/debian/ jessie main non-free contrib 3: deb http: //security.debian.org/ jessie/updates main contrib non-free 4: deb-src http: //security.debian.org/ jessie/updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/bananian.list 1: deb http: //dl.bananian.org/packages/ 1604 main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 0.8% command: zsh pid: 30903 mem: 2.68 MiB (0.2%) 2: cpu: 0.5% command: rtorrent pid: 850 mem: 9.55 MiB (0.9%) 3: cpu: 0.4% command: mysqld pid: 1824 mem: 109.5 MiB (11.2%) 4: cpu: 0.4% command: smbd pid: 27318 mem: 7.09 MiB (0.7%) 5: cpu: 0.4% command: rpimonitord started by: perl pid: 31490 mem: 8.28 MiB (0.8%) Memory top: 5 1: mem: 109.5 MiB (11.2%) command: mysqld pid: 1824 cpu: 0.4% 2: mem: 32.8 MiB (3.3%) command: apache2 pid: 31782 cpu: 0.0% 3: mem: 24.7 MiB (2.5%) command: apache2 pid: 4344 cpu: 0.0% 4: mem: 24.5 MiB (2.5%) command: apache2 pid: 13962 cpu: 0.0% 5: mem: 24.5 MiB (2.5%) command: apache2 pid: 3826 cpu: 0.0% Info: Processes: 95 Uptime: 72d 18h 44m Init: SysVinit v: 2.88 runlevel: 2 default: 2 Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper v: 4.3.30-release inxi: 3.1.00

inxi Results

System:    Kernel: 3.4.113-bananian armv7l bits: 32 compiler: gcc v: 4.9.2 
           parameters: console=ttyS0,115200 console=tty0 console=tty1 sunxi_g2d_mem_reserve=0 
           sunxi_ve_mem_reserve=0 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1680x1050p60 
           root=/dev/sda1 rootfstype=ext4 elevator=deadline rootwait 
           Console: tty 0 dm: N/A Distro: Debian GNU/Linux 8 (jessie) 
Machine:   Type: ARM Device System: sun7i rev: N/A Battery:   ID-1: battery charge: 100% condition: N/A/0.0 Wh volts: N/A/0.0 model: battery 
           type: Li-ion N/A status: Full 
Memory:    RAM: total: 970.4 MiB used: 237.5 MiB (24.5%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Dual Core model: ARMv7 v7l bits: 32 type: MCP arch: v7l family: 7 
           model-id: N/A stepping: 4 microcode: N/A bogomips: 4023 
           Speed: 1008 MHz min/max: 60/1008 MHz Core speeds (MHz): 1: 1008 2: 1008 
           Features: edsp fastmult half idiva idivt neon swp thumb tls vfp vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Message: No ARM data found for this feature. 
           Display: server: No display server data found. Headless machine? tty: 85x53 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Message: No ARM data found for this feature. 
           Device-1: sunxi-CODEC driver: sunxi-CODEC message: bus/chip ids unavailable 
           Sound Server: ALSA v: 1.0.25 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tunl0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 713.47 GiB used: 133.77 GiB (18.7%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda vendor: Western Digital model: WD7500BFCX-68N6GN0 size: 698.64 GiB 
           block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s 
           rotation: 5400 rpm rev: 82.0 temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 344d 8h cycles: 19 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 50.00 GiB size: 49.22 GiB (98.43%) used: 3.99 GiB (8.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: root 
           uuid: b773f3ca-d2f1-4d64-8c8f-024d8d1da19e 
           ID-2: /home//data raw size: 648.64 GiB size: 638.46 GiB (98.43%) 
           used: 129.78 GiB (20.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: data 
           uuid: a5a8218f-f150-40bc-b9af-b15fcf0d4334 
Swap:      Kernel: swappiness: 1 (default 60) cache pressure: 50 (default 100) 
           ID-1: swap-1 type: file size: 512.0 MiB used: 24 KiB (0.0%) priority: -1 
           file: /swapfile1 
Unmounted: ID-1: /dev/mmcblk0p1 size: 20.0 MiB fs: vfat label: N/A uuid: BCCA-7937 
           ID-2: /dev/mmcblk0p2 size: 1.75 GiB fs: ext4 label: root 
           uuid: a1ab4975-dd32-4d7c-b905-ae9274165e0d 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ftp.de.debian.org/debian/ jessie main non-free contrib
           2: deb-src http: //ftp.de.debian.org/debian/ jessie main non-free contrib
           3: deb http: //security.debian.org/ jessie/updates main contrib non-free
           4: deb-src http: //security.debian.org/ jessie/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/bananian.list 
           1: deb http: //dl.bananian.org/packages/ 1604 main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 0.8% command: zsh pid: 30903 mem: 2.68 MiB (0.2%) 
           2: cpu: 0.5% command: rtorrent pid: 850 mem: 9.55 MiB (0.9%) 
           3: cpu: 0.4% command: mysqld pid: 1824 mem: 109.5 MiB (11.2%) 
           4: cpu: 0.4% command: smbd pid: 27318 mem: 7.09 MiB (0.7%) 
           5: cpu: 0.4% command: rpimonitord started by: perl pid: 31490 mem: 8.28 MiB (0.8%) 
           Memory top: 5 
           1: mem: 109.5 MiB (11.2%) command: mysqld pid: 1824 cpu: 0.4% 
           2: mem: 32.8 MiB (3.3%) command: apache2 pid: 31782 cpu: 0.0% 
           3: mem: 24.7 MiB (2.5%) command: apache2 pid: 4344 cpu: 0.0% 
           4: mem: 24.5 MiB (2.5%) command: apache2 pid: 13962 cpu: 0.0% 
           5: mem: 24.5 MiB (2.5%) command: apache2 pid: 3826 cpu: 0.0% 
Info:      Processes: 95 Uptime: 72d 18h 44m Init: SysVinit v: 2.88 runlevel: 2 default: 2 
           Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper v: 4.3.30-release inxi: 3.1.00

Benchmark #25765 - Brand: Western Digital Red 2.5" NAS HDD