Benchmark #25933 - pibenchmarks.com

Brand: Unidentified Realtek RTL9210 Adapter
SSD (M.2 NVMe)
#195 / 1,700
91
#488 / 1,700
#469 / 989
#263 / 284
7,156
	Amazon.com AliExpress

Overview
2020-05-30 07:03:21
#25,933
8,369
+1,213 (+14.49%)
Anonymous
WD Blue SSD 1TB

Storage Details
Unidentified Realtek RTL9210 Adapter
SSD (M.2 NVMe)
931.3G
SSD
Realtek
RTL9210NVME
3.00
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
190 MB/s
294.38 MB/s
292.68 MB/s
8,778 IOPS
14,970 IOPS
35,113 KB/s
59,883 KB/s
32,343 KB/s
27,874 KB/s
23,215 KB/s
34,163 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 460.6 MiB (11.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: fbdev unloaded: modesetting Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 961.24 GiB used: 6.59 GiB (0.7%) ID-1: /dev/mmcblk0 model: SU32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: Realtek RTL9210 NVME size: 931.51 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 915.64 GiB (98.32%) used: 6.54 GiB (0.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Realtek type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0bda:9210 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 13.3% command: chromium-browser-v7 pid: 3738 mem: 108.6 MiB (2.7%) 2: cpu: 12.9% command: xrdp pid: 561 mem: 25.7 MiB (0.6%) 3: cpu: 12.8% command: chromium-browser-v7 pid: 4068 mem: 96.7 MiB (2.4%) 4: cpu: 10.3% command: chromium-browser-v7 pid: 3688 mem: 116.9 MiB (2.9%) 5: cpu: 4.8% command: xorg pid: 572 mem: 97.8 MiB (2.5%) Memory top: 5 1: mem: 116.9 MiB (2.9%) command: chromium-browser-v7 pid: 3688 cpu: 10.3% 2: mem: 108.6 MiB (2.7%) command: chromium-browser-v7 pid: 3738 cpu: 13.3% 3: mem: 97.8 MiB (2.5%) command: xorg pid: 572 cpu: 4.8% 4: mem: 96.7 MiB (2.4%) command: chromium-browser-v7 pid: 4068 cpu: 12.8% 5: mem: 91.6 MiB (2.3%) command: chromium-browser-v7 pid: 3888 cpu: 3.6% Info: Processes: 138 Uptime: 23m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: N/A 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 460.6 MiB (11.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: fbdev unloaded: modesetting 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 961.24 GiB used: 6.59 GiB (0.7%) 
           ID-1: /dev/mmcblk0 model: SU32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: Realtek RTL9210 NVME size: 931.51 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 915.64 GiB (98.32%) used: 6.54 GiB (0.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
           ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Realtek type: Mass Storage driver: uas interfaces: 1 rev: 3.2 
           speed: 5 Gb/s chip ID: 0bda:9210 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 13.3% command: chromium-browser-v7 pid: 3738 mem: 108.6 MiB (2.7%) 
           2: cpu: 12.9% command: xrdp pid: 561 mem: 25.7 MiB (0.6%) 
           3: cpu: 12.8% command: chromium-browser-v7 pid: 4068 mem: 96.7 MiB (2.4%) 
           4: cpu: 10.3% command: chromium-browser-v7 pid: 3688 mem: 116.9 MiB (2.9%) 
           5: cpu: 4.8% command: xorg pid: 572 mem: 97.8 MiB (2.5%) 
           Memory top: 5 
           1: mem: 116.9 MiB (2.9%) command: chromium-browser-v7 pid: 3688 cpu: 10.3% 
           2: mem: 108.6 MiB (2.7%) command: chromium-browser-v7 pid: 3738 cpu: 13.3% 
           3: mem: 97.8 MiB (2.5%) command: xorg pid: 572 cpu: 4.8% 
           4: mem: 96.7 MiB (2.4%) command: chromium-browser-v7 pid: 4068 cpu: 12.8% 
           5: mem: 91.6 MiB (2.3%) command: chromium-browser-v7 pid: 3888 cpu: 3.6% 
Info:      Processes: 138 Uptime: 23m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25933 - Brand: Unidentified Realtek RTL9210 Adapter