Benchmark #25952 - pibenchmarks.com

Brand: SanDisk Ultra CZ48 USB
USB Flash
#52 / 1,679
323
#1,379 / 1,679
#34 / 94
#35 / 89
1,077
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-30 13:20:41
#25,952
492
-585 (-118.90%)
Anonymous
SanDisk Ultra USB3.0 16GB on RPi 3B

Storage Details
SanDisk Ultra CZ48 USB
USB Flash
10G
USB Flash
SanDisk
UltraUSB3.0
2.00
480
0424:5591
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x5591 (SCL3711-NFC&RW)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
10.6 MB/s
22.9 MB/s
22.32 MB/s
204 IOPS
688 IOPS
817 KB/s
2,753 KB/s
9,258 KB/s
1,848 KB/s
3,870 KB/s
762 KB/s

inxi Results
System: Host: raspberrypi-acasa Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9fb1957f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 program_usb_timeout=1 ipv6.disable=1 plymouth.ignore-serial-consoles Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1004.2 MiB used: 615.0 MiB (61.2%) gpu: 320.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo Message: Advanced graphics data unavailable for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: enxb827ebfca816 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X WAN IP: 79.118.X.X Drives: Local Storage: total: 21.61 GiB used: 3.55 GiB (16.4%) ID-1: /dev/mmcblk0 model: SA08G size: 7.29 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra USB 3.0 size: 14.32 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 9.95 GiB size: 9.73 GiB (97.82%) used: 3.50 GiB (36.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 ID-3: /media/pi/D027-27CF raw size: 7.28 GiB size: 7.27 GiB (99.79%) used: 76 KiB (0.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: D027-27CF Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 12.8 MiB (12.8%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:4 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5591 Device-3: 1-1.4:5 info: Realtek RTL2838 DVB-T type: driver: usbfs interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:2838 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http://repo.feed.flightradar24.com flightradar24 raspberrypi-stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 16.5% command: dump1090-mutability pid: 5861 mem: 5.80 MiB (0.8%) 2: cpu: 9.2% command: kodi.bin_v7 pid: 599 mem: 45.8 MiB (6.6%) 3: cpu: 0.6% command: init pid: 1 mem: 7.82 MiB (1.1%) 4: cpu: 0.2% command: [vchiq-slot/0] pid: 74 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: bash pid: 6229 mem: 2.84 MiB (0.4%) Memory top: 5 1: mem: 72.2 MiB (10.5%) command: mysqld pid: 1269 cpu: 0.1% 2: mem: 45.8 MiB (6.6%) command: kodi.bin_v7 pid: 599 cpu: 9.2% 3: mem: 28.9 MiB (4.2%) command: xorg pid: 631 cpu: 0.0% 4: mem: 21.7 MiB (3.1%) command: lxpanel pid: 836 cpu: 0.0% 5: mem: 16.3 MiB (2.3%) command: pcmanfm pid: 841 cpu: 0.0% Info: Processes: 171 Uptime: 1h 05m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh running in: Storage.sh (SSH) inxi: 3.1.00

inxi Results

System:    Host: raspberrypi-acasa Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=9fb1957f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 
           program_usb_timeout=1 ipv6.disable=1 plymouth.ignore-serial-consoles 
           Desktop: LXDE info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory:    RAM: total: 1004.2 MiB used: 615.0 MiB (61.2%) gpu: 320.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 
           model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo 
           Message: Advanced graphics data unavailable for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx 
           bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: enxb827ebfca816 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           WAN IP: 79.118.X.X 
Drives:    Local Storage: total: 21.61 GiB used: 3.55 GiB (16.4%) 
           ID-1: /dev/mmcblk0 model: SA08G size: 7.29 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra USB 3.0 size: 14.32 GiB block size: physical: 512 B 
           logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 9.95 GiB size: 9.73 GiB (97.82%) used: 3.50 GiB (36.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
           ID-3: /media/pi/D027-27CF raw size: 7.28 GiB size: 7.27 GiB (99.79%) used: 76 KiB (0.0%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: D027-27CF 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 12.8 MiB (12.8%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network 
           driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 
           Device-2: 1-1.3:4 info: SanDisk Ultra Flair type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 0781:5591 
           Device-3: 1-1.4:5 info: Realtek RTL2838 DVB-T type:  driver: usbfs interfaces: 2 
           rev: 2.0 speed: 480 Mb/s chip ID: 0bda:2838 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http://repo.feed.flightradar24.com flightradar24 raspberrypi-stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 16.5% command: dump1090-mutability pid: 5861 mem: 5.80 MiB (0.8%) 
           2: cpu: 9.2% command: kodi.bin_v7 pid: 599 mem: 45.8 MiB (6.6%) 
           3: cpu: 0.6% command: init pid: 1 mem: 7.82 MiB (1.1%) 
           4: cpu: 0.2% command: [vchiq-slot/0] pid: 74 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: bash pid: 6229 mem: 2.84 MiB (0.4%) 
           Memory top: 5 
           1: mem: 72.2 MiB (10.5%) command: mysqld pid: 1269 cpu: 0.1% 
           2: mem: 45.8 MiB (6.6%) command: kodi.bin_v7 pid: 599 cpu: 9.2% 
           3: mem: 28.9 MiB (4.2%) command: xorg pid: 631 cpu: 0.0% 
           4: mem: 21.7 MiB (3.1%) command: lxpanel pid: 836 cpu: 0.0% 
           5: mem: 16.3 MiB (2.3%) command: pcmanfm pid: 841 cpu: 0.0% 
Info:      Processes: 171 Uptime: 1h 05m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: 
           gcc: 8.3.0 alt: 8 Shell: Storage.sh running in: Storage.sh (SSH) inxi: 3.1.00

Benchmark #25952 - Brand: SanDisk Ultra CZ48 USB