Benchmark #25975 - pibenchmarks.com

Brand: Western Digital Blue 3D NAND
SSD (2.5" SATA)
#75 / 1,679
257
#603 / 1,679
#581 / 984
#135 / 370
6,486
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-30 16:27:08
#25,975
6,507
+21 (+0.32%)
RockKnocker
external usb3 500gb crucial drive, boot on sd

Storage Details
Western Digital Blue 3D NAND
SSD (2.5" SATA)
500G
SSD
WDC
WDS500G2B0A
2.5 inch
SATA
3.00
5,000
05e3:0731
0x05e3
0x0731 (GL3310 SATA 3Gb/s Bridge Controller)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
180 MB/s
136.73 MB/s
135.71 MB/s
6,583 IOPS
4,549 IOPS
26,332 KB/s
18,196 KB/s
28,813 KB/s
25,595 KB/s
16,201 KB/s
26,316 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c620f41-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 537.5 MiB (13.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 525.24 GiB used: 6.07 GiB (1.2%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WDS500G2B0A size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: X611 temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 16 read: 0 KiB written: 6 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 393.82 GiB size: 387.59 GiB (98.42%) used: 6.02 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: A764-6923 ID-2: /dev/sda3 size: 10.61 GiB fs: swap label: swap uuid: 37b332d3-efd9-44f0-bdb2-3beef5276c80 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Genesys Logic Logitech G110 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0607 Device-1: 1-1.4.1:4 info: Logitech G19 Gaming Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c228 Device-2: 1-1.4.2:5 info: Logitech G19 Gaming Keyboard Macro Interface type: driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 046d:c229 Device-3: 1-1.4.3:6 info: Dell type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 413c:301a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-4: 2-1:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0731 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 22.3% command: chromium-browser-v7 pid: 1750 mem: 147.0 MiB (3.7%) 2: cpu: 18.4% command: chromium-browser-v7 pid: 1881 mem: 91.0 MiB (2.3%) 3: cpu: 12.5% command: chromium-browser-v7 pid: 889 mem: 140.7 MiB (3.6%) 4: cpu: 7.1% command: chromium-browser-v7 pid: 935 mem: 81.2 MiB (2.0%) 5: cpu: 4.0% command: chromium-browser-v7 pid: 1053 mem: 89.3 MiB (2.2%) Memory top: 5 1: mem: 147.0 MiB (3.7%) command: chromium-browser-v7 pid: 1750 cpu: 22.3% 2: mem: 140.7 MiB (3.6%) command: chromium-browser-v7 pid: 889 cpu: 12.5% 3: mem: 91.0 MiB (2.3%) command: chromium-browser-v7 pid: 1881 cpu: 18.4% 4: mem: 89.3 MiB (2.2%) command: chromium-browser-v7 pid: 1053 cpu: 4.0% 5: mem: 81.2 MiB (2.0%) command: chromium-browser-v7 pid: 935 cpu: 7.1% Info: Processes: 171 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=6c620f41-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 537.5 MiB (13.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") 
           diag: 547mm (21.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 525.24 GiB used: 6.07 GiB (1.2%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WDS500G2B0A size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: X611 temp: 37 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 16 read: 0 KiB 
           written: 6 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 393.82 GiB size: 387.59 GiB (98.42%) used: 6.02 GiB (1.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: A764-6923 
           ID-2: /dev/sda3 size: 10.61 GiB fs: swap label: swap 
           uuid: 37b332d3-efd9-44f0-bdb2-3beef5276c80 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Genesys Logic Logitech G110 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0607 
           Device-1: 1-1.4.1:4 info: Logitech G19 Gaming Keyboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c228 
           Device-2: 1-1.4.2:5 info: Logitech G19 Gaming Keyboard Macro Interface 
           type:  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
           speed: 480 Mb/s chip ID: 046d:c229 
           Device-3: 1-1.4.3:6 info: Dell type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 2.0 speed: 1.5 Mb/s chip ID: 413c:301a 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-4: 2-1:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 05e3:0731 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 22.3% command: chromium-browser-v7 pid: 1750 mem: 147.0 MiB (3.7%) 
           2: cpu: 18.4% command: chromium-browser-v7 pid: 1881 mem: 91.0 MiB (2.3%) 
           3: cpu: 12.5% command: chromium-browser-v7 pid: 889 mem: 140.7 MiB (3.6%) 
           4: cpu: 7.1% command: chromium-browser-v7 pid: 935 mem: 81.2 MiB (2.0%) 
           5: cpu: 4.0% command: chromium-browser-v7 pid: 1053 mem: 89.3 MiB (2.2%) 
           Memory top: 5 
           1: mem: 147.0 MiB (3.7%) command: chromium-browser-v7 pid: 1750 cpu: 22.3% 
           2: mem: 140.7 MiB (3.6%) command: chromium-browser-v7 pid: 889 cpu: 12.5% 
           3: mem: 91.0 MiB (2.3%) command: chromium-browser-v7 pid: 1881 cpu: 18.4% 
           4: mem: 89.3 MiB (2.2%) command: chromium-browser-v7 pid: 1053 cpu: 4.0% 
           5: mem: 81.2 MiB (2.0%) command: chromium-browser-v7 pid: 935 cpu: 7.1% 
Info:      Processes: 171 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25975 - Brand: Western Digital Blue 3D NAND