Benchmark #26089 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,675
895
#438 / 1,675
#424 / 984
#50 / 370
7,431
	Amazon.com AliExpress

Overview
2020-05-31 20:23:21
#26,089
4,616
-2,815 (-60.98%)
Anonymous

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
SSD
JMicron
JMicronTech
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 20.04 LTS
aarch64

Benchmark Results
109 MB/s
3,563 IOPS
3,146 IOPS
14,254 KB/s
12,587 KB/s
23,697 KB/s
11,290 KB/s
17,383 KB/s
19,734 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 64 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u elevator=deadline quiet bootmenutimeout=10 datadev=UUID=20bd0b39-f84c-4fc2-9bcd-0c5e382f6c50 qmap=es Console: tty 0 dm: N/A Distro: Ubuntu 20.04 LTS (Focal Fossa) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.64 GiB used: 282.5 MiB (7.6%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 167x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Use of uninitialized value in string ne at ./inxi line 9137. Use of uninitialized value in string ne at ./inxi line 9138. Drives: Local Storage: total: 968.70 GiB used: 0 KiB (0.0%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 3202 drive rev: S1230A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 91 read: 500 KiB written: 1.8 MiB ID-3: /dev/sdb type: USB vendor: Kingston model: DT 101 II size: 7.46 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /snap/core18/1708 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-2: /snap/core18/1753 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A ID-3: /snap/lxd/14808 raw size: 61.2 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A ID-4: /snap/lxd/15236 raw size: 61.7 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A ID-5: /snap/snapd/7267 raw size: 23.5 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop5 label: N/A uuid: N/A Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p1 size: 29.72 GiB fs: vfat label: N/A uuid: FD66-4346 ID-2: /dev/sda1 size: 127.0 MiB fs: ext4 label: data uuid: d80bc7c3-918f-4359-933f-3e167b2dc5ac ID-3: /dev/sda2 size: 931.39 GiB fs: ext4 label: berryboot uuid: 20bd0b39-f84c-4fc2-9bcd-0c5e382f6c50 ID-4: /dev/sdb1 size: 7.46 GiB fs: vfat label: UBUNTU 20_0 uuid: EC22-EB2C USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.3.1:4 info: Corsair USB2.0 Hub type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1b1c:1b34 Device-2: 1-1.3.4:5 info: Corsair type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1b1c:1b4f Device-3: 1-1.4:6 info: Kingston DataTraveler 101 II type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0951:1625 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-4: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports focal main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports focal universe 4: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports focal multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports focal-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports focal-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports focal-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-focal.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu focal main Processes: CPU top: 5 1: cpu: 0.8% command: systemd pid: 1 mem: 10.5 MiB (0.2%) 2: cpu: 0.3% command: systemd-resolved pid: 2259 mem: 11.0 MiB (0.2%) 3: cpu: 0.3% command: systemd-timesyncd pid: 2371 mem: 3.78 MiB (0.1%) 4: cpu: 0.3% command: smartd pid: 13265 mem: 4.87 MiB (0.1%) 5: cpu: 0.2% command: [usb-storage] pid: 104 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 30.6 MiB (0.8%) command: snapd pid: 590 cpu: 0.1% 2: mem: 18.9 MiB (0.5%) command: unattended-upgrade-shutdown started by: python3 pid: 651 cpu: 0.0% 3: mem: 16.4 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 587 cpu: 0.0% 4: mem: 14.2 MiB (0.3%) command: packagekitd pid: 12245 cpu: 0.0% 5: mem: 11.0 MiB (0.2%) command: systemd-resolved pid: 2259 cpu: 0.3% Info: Processes: 127 Uptime: 19m Init: systemd v: 245 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.16-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 64 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u elevator=deadline quiet 
           bootmenutimeout=10 datadev=UUID=20bd0b39-f84c-4fc2-9bcd-0c5e382f6c50 qmap=es 
           Console: tty 0 dm: N/A Distro: Ubuntu 20.04 LTS (Focal Fossa) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.64 GiB used: 282.5 MiB (7.6%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 167x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Use of uninitialized value in string ne at ./inxi line 9137.
Use of uninitialized value in string ne at ./inxi line 9138.
Drives:    Local Storage: total: 968.70 GiB used: 0 KiB (0.0%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 931.51 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 3202 
           drive rev: S1230A0 temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 91 read: 500 KiB 
           written: 1.8 MiB 
           ID-3: /dev/sdb type: USB vendor: Kingston model: DT 101 II size: 7.46 GiB block size: 
           physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /snap/core18/1708 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-2: /snap/core18/1753 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A 
           ID-3: /snap/lxd/14808 raw size: 61.2 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A 
           ID-4: /snap/lxd/15236 raw size: 61.7 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A 
           ID-5: /snap/snapd/7267 raw size: 23.5 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop5 label: N/A uuid: N/A 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p1 size: 29.72 GiB fs: vfat label: N/A uuid: FD66-4346 
           ID-2: /dev/sda1 size: 127.0 MiB fs: ext4 label: data 
           uuid: d80bc7c3-918f-4359-933f-3e167b2dc5ac 
           ID-3: /dev/sda2 size: 931.39 GiB fs: ext4 label: berryboot 
           uuid: 20bd0b39-f84c-4fc2-9bcd-0c5e382f6c50 
           ID-4: /dev/sdb1 size: 7.46 GiB fs: vfat label: UBUNTU 20_0 uuid: EC22-EB2C 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.3.1:4 info: Corsair USB2.0 Hub type: Mouse,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1b1c:1b34 Device-2: 1-1.3.4:5 info: Corsair type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1b1c:1b4f Device-3: 1-1.4:6 info: Kingston DataTraveler 101 II type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0951:1625 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-4: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports focal main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports focal universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports focal multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports focal-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports focal-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports focal-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports focal-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-focal.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu focal main
Processes: CPU top: 5 
           1: cpu: 0.8% command: systemd pid: 1 mem: 10.5 MiB (0.2%) 
           2: cpu: 0.3% command: systemd-resolved pid: 2259 mem: 11.0 MiB (0.2%) 
           3: cpu: 0.3% command: systemd-timesyncd pid: 2371 mem: 3.78 MiB (0.1%) 
           4: cpu: 0.3% command: smartd pid: 13265 mem: 4.87 MiB (0.1%) 
           5: cpu: 0.2% command: [usb-storage] pid: 104 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 30.6 MiB (0.8%) command: snapd pid: 590 cpu: 0.1% 
           2: mem: 18.9 MiB (0.5%) command: unattended-upgrade-shutdown started by: python3 
           pid: 651 cpu: 0.0% 
           3: mem: 16.4 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 587 
           cpu: 0.0% 
           4: mem: 14.2 MiB (0.3%) command: packagekitd pid: 12245 cpu: 0.0% 
           5: mem: 11.0 MiB (0.2%) command: systemd-resolved pid: 2259 cpu: 0.3% 
Info:      Processes: 127 Uptime: 19m Init: systemd v: 245 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.16-release inxi: 3.1.01

Benchmark #26089 - Brand: Undentified JMicron USB to SATA Adapter