Benchmark #26158 - pibenchmarks.com

Brand: TCSUNBOW M3 Series
SSD (mSATA)
#634 / 1,665
10
#892 / 1,665
#849 / 977
#47 / 69
4,593
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-06-01 14:51:22
#26,158
8,876
+4,283 (+48.25%)
esnw33430
sunbow m2 240gb ssd on micron usb to m2 adaptor

Storage Details
TCSUNBOW M3 Series
SSD (mSATA)
240G
SSD
TCSUNBOW
M3240GB
mSATA
SATA
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
201 MB/s
492.37 MB/s
246.05 MB/s
12,132 IOPS
22,579 IOPS
48,530 KB/s
90,319 KB/s
31,493 KB/s
29,638 KB/s
20,316 KB/s
32,776 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2fed7fee-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 388.4 MiB (9.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: veth06dadcd state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: vethe98e0f6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 230.97 GiB used: 4.04 GiB (1.7%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: TCSunBow model: M3 240GB size: 223.57 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 3102 drive rev: SBFCBBT3 temp: 36 C scheme: MBR SMART: yes state: enabled health: PASSED on: 14d 10h cycles: 207 read: 11 KiB written: 50 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.84 GiB (98.44%) used: 1.99 GiB (0.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C ID-3: /var/lib/docker/overlay2/15ca6abd97b25a47843265e8e3b7b4afd2d825ec7302f73a7c8edfde765f9ec4/merged raw size: N/A size: 219.84 GiB used: 1.99 GiB (0.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/92aad6b910728ffdadc9aea38920d9c3acbeba78db4113a1c5b7aef056595b52/merged raw size: N/A size: 219.84 GiB used: 1.99 GiB (0.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 592B-C92C ID-2: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.1% command: dockerd pid: 590 mem: 79.6 MiB (2.0%) 2: cpu: 4.9% command: node-red pid: 1530 mem: 57.3 MiB (1.4%) 3: cpu: 1.2% command: npm pid: 1442 mem: 35.0 MiB (0.8%) 4: cpu: 0.7% command: [kworker/u8:1-events_unbound] pid: 1035 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: init pid: 1 mem: 8.16 MiB (0.2%) Memory top: 5 1: mem: 79.6 MiB (2.0%) command: dockerd pid: 590 cpu: 7.1% 2: mem: 57.3 MiB (1.4%) command: node-red pid: 1530 cpu: 4.9% 3: mem: 35.0 MiB (0.8%) command: npm pid: 1442 cpu: 1.2% 4: mem: 23.9 MiB (0.6%) command: docker-containerd pid: 605 cpu: 0.4% 5: mem: 19.5 MiB (0.4%) command: /portainer pid: 1102 cpu: 0.2% Info: Processes: 133 Uptime: 13m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2fed7fee-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 388.4 MiB (9.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth06dadcd state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: vethe98e0f6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 230.97 GiB used: 4.04 GiB (1.7%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: TCSunBow model: M3 240GB size: 223.57 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 3102 
           drive rev: SBFCBBT3 temp: 36 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 14d 10h cycles: 207 read: 11 KiB 
           written: 50 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.84 GiB (98.44%) used: 1.99 GiB (0.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C 
           ID-3: /var/lib/docker/overlay2/15ca6abd97b25a47843265e8e3b7b4afd2d825ec7302f73a7c8edfde765f9ec4/merged raw size: N/A size: 219.84 GiB used: 1.99 GiB (0.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/92aad6b910728ffdadc9aea38920d9c3acbeba78db4113a1c5b7aef056595b52/merged raw size: N/A size: 219.84 GiB used: 1.99 GiB (0.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 592B-C92C 
           ID-2: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.1% command: dockerd pid: 590 mem: 79.6 MiB (2.0%) 
           2: cpu: 4.9% command: node-red pid: 1530 mem: 57.3 MiB (1.4%) 
           3: cpu: 1.2% command: npm pid: 1442 mem: 35.0 MiB (0.8%) 
           4: cpu: 0.7% command: [kworker/u8:1-events_unbound] pid: 1035 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: init pid: 1 mem: 8.16 MiB (0.2%) 
           Memory top: 5 
           1: mem: 79.6 MiB (2.0%) command: dockerd pid: 590 cpu: 7.1% 
           2: mem: 57.3 MiB (1.4%) command: node-red pid: 1530 cpu: 4.9% 
           3: mem: 35.0 MiB (0.8%) command: npm pid: 1442 cpu: 1.2% 
           4: mem: 23.9 MiB (0.6%) command: docker-containerd pid: 605 cpu: 0.4% 
           5: mem: 19.5 MiB (0.4%) command: /portainer pid: 1102 cpu: 0.2% 
Info:      Processes: 133 Uptime: 13m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26158 - Brand: TCSUNBOW M3 Series