Benchmark #26352 - pibenchmarks.com

Brand: Sabrent M.2 NVMe Enclosure
SSD (M.2 NVMe)
#138 / 1,548
89
#575 / 1,548
#554 / 883
#178 / 197
5,965
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-03 16:58:34
#26,352
4,114
-1,851 (-44.99%)
Anonymous

Storage Details
Sabrent M.2 NVMe Enclosure
SSD (M.2 NVMe)
SSD
Sabrent
SABRENTExternal
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
100 MB/s
3,264 IOPS
3,666 IOPS
13,057 KB/s
14,665 KB/s
17,844 KB/s
15,487 KB/s
14,169 KB/s
17,172 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1561:u fsck.repair=yes rootwait bootmenutimeout=20 qmap=it datadev=UUID=bf8d1d8c-5ca6-4da3-a030-2a5d145a9433 qmap=it Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 335.3 MiB (8.6%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 114x60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 252.72 GiB used: 64.2 MiB (0.0%) ID-1: /dev/mmcblk0 model: SD32G size: 29.14 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Crucial drive model: CT240BX500SSD1 size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: M6CR013 temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED on: 8 hrs cycles: 12 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 29.14 GiB size: 29.13 GiB (99.98%) used: 64.2 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: RACKPI3 uuid: 4505-1F19 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda2 size: 223.45 GiB fs: ext4 label: berryboot uuid: bf8d1d8c-5ca6-4da3-a030-2a5d145a9433 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 13.4% command: display.py started by: python3 pid: 657 mem: 11.5 MiB (0.3%) 2: cpu: 9.4% command: [w1_bus_master1] pid: 130 mem: 0.00 MiB (0.0%) 3: cpu: 7.6% command: avahi-daemon: pid: 327 mem: 3.02 MiB (0.0%) 4: cpu: 5.5% command: lib/systemd/systemd pid: 1 mem: 7.69 MiB (0.2%) 5: cpu: 1.2% command: systemd-journald pid: 211 mem: 7.84 MiB (0.2%) Memory top: 5 1: mem: 12.5 MiB (0.3%) command: packagekitd pid: 1367 cpu: 1.0% 2: mem: 11.5 MiB (0.3%) command: display.py started by: python3 pid: 657 cpu: 13.4% 3: mem: 8.81 MiB (0.2%) command: udisksd pid: 371 cpu: 0.8% 4: mem: 7.84 MiB (0.2%) command: systemd-journald pid: 211 cpu: 1.2% 5: mem: 7.69 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 5.5% Info: Processes: 145 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1561:u fsck.repair=yes rootwait 
           bootmenutimeout=20 qmap=it datadev=UUID=bf8d1d8c-5ca6-4da3-a030-2a5d145a9433 qmap=it 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 335.3 MiB (8.6%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 114x60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 252.72 GiB used: 64.2 MiB (0.0%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 29.14 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Crucial 
           drive model: CT240BX500SSD1 size: 223.57 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rev: 0204 
           drive rev: M6CR013 temp: 35 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 8 hrs cycles: 12 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 29.14 GiB size: 29.13 GiB (99.98%) used: 64.2 MiB (0.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: RACKPI3 uuid: 4505-1F19 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 223.45 GiB fs: ext4 label: berryboot 
           uuid: bf8d1d8c-5ca6-4da3-a030-2a5d145a9433 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 152d:1561 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 13.4% command: display.py started by: python3 pid: 657 mem: 11.5 MiB (0.3%) 
           2: cpu: 9.4% command: [w1_bus_master1] pid: 130 mem: 0.00 MiB (0.0%) 
           3: cpu: 7.6% command: avahi-daemon: pid: 327 mem: 3.02 MiB (0.0%) 
           4: cpu: 5.5% command: lib/systemd/systemd pid: 1 mem: 7.69 MiB (0.2%) 
           5: cpu: 1.2% command: systemd-journald pid: 211 mem: 7.84 MiB (0.2%) 
           Memory top: 5 
           1: mem: 12.5 MiB (0.3%) command: packagekitd pid: 1367 cpu: 1.0% 
           2: mem: 11.5 MiB (0.3%) command: display.py started by: python3 pid: 657 cpu: 13.4% 
           3: mem: 8.81 MiB (0.2%) command: udisksd pid: 371 cpu: 0.8% 
           4: mem: 7.84 MiB (0.2%) command: systemd-journald pid: 211 cpu: 1.2% 
           5: mem: 7.69 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 5.5% 
Info:      Processes: 145 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26352 - Brand: Sabrent M.2 NVMe Enclosure