Benchmark #26365 - pibenchmarks.com

Brand: Western Digital Blue 2.5" HDD
HDD (2.5" SATA)
#280 / 1,672
46
#1,228 / 1,672
#50 / 68
#12 / 20
1,366
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-04 06:10:54
#26,365
1,801
+435 (+24.15%)
Nikhil
WD BLUE 2.5 HDD 500GB WITH QuantumZERO USB 3.0/USB 3.1 Gen 1 Hard Drive Disk HDD/SSD Enclosure Case

Storage Details
Western Digital Blue 2.5" HDD
HDD (2.5" SATA)
500G
HDD
WDC
WD5000LPVX-00V0TT0
SATA
5,400
3.00
5,000
1d6b:a2a4
0x1d6b (Linux Foundation)
0xa2a4 (External SATA Hard Drive Adapter cable PA023U3)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
106 MB/s
114.58 MB/s
276 MB/s
460 IOPS
479 IOPS
1,840 KB/s
1,916 KB/s
25,450 KB/s
19,472 KB/s
551 KB/s
1,798 KB/s

inxi Results
System: Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=e42e0d07-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.81 GiB used: 736.8 MiB (18.9%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 156x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 465.76 GiB used: 15.21 TiB (3344.5%) ID-1: /dev/sda type: USB vendor: Western Digital model: WD50 00LPVX-00V0TT0 size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 6601 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 458.30 GiB (98.45%) used: 3.89 GiB (0.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C ID-3: /mnt/gdrive raw size: N/A size: 1.01 PiB used: 15.21 TiB (1.5%) fs: fuse.rclone source: ERR-102 label: N/A uuid: N/A ID-4: /mnt/td raw size: N/A size: 1024.00 TiB used: 0 KiB (0.0%) fs: fuse.rclone source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: HP LaserJet 1020 type: Printer driver: usblp interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 03f0:2b17 Device-2: 1-1.4:4 info: HP Deskjet 2050 J510 type: driver: usblp interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 03f0:8711 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 7825:a2a4 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.0% command: embyserver pid: 5178 mem: 149.0 MiB (3.9%) 2: cpu: 0.5% command: [kworker/0:1-mm_percpu_wq] pid: 28856 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: [irq/39-mmc0] pid: 94 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: rclone pid: 364 mem: 329.9 MiB (8.7%) 5: cpu: 0.3% command: [kworker/0:0-events] pid: 28008 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 329.9 MiB (8.7%) command: rclone pid: 364 cpu: 0.3% 2: mem: 149.0 MiB (3.9%) command: embyserver pid: 5178 cpu: 1.0% 3: mem: 49.3 MiB (1.3%) command: pm2 pid: 976 cpu: 0.0% 4: mem: 45.9 MiB (1.2%) command: rclone pid: 362 cpu: 0.0% 5: mem: 16.2 MiB (0.4%) command: php-cgi pid: 931 cpu: 0.0% Info: Processes: 149 Uptime: 22h 06m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=e42e0d07-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Memory:    RAM: total: 3.81 GiB used: 736.8 MiB (18.9%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 156x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 465.76 GiB used: 15.21 TiB (3344.5%) 
           ID-1: /dev/sda type: USB vendor: Western Digital model: WD50 00LPVX-00V0TT0 
           size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 6601 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 458.30 GiB (98.45%) used: 3.89 GiB (0.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C 
           ID-3: /mnt/gdrive raw size: N/A size: 1.01 PiB used: 15.21 TiB (1.5%) fs: fuse.rclone 
           source: ERR-102 label: N/A uuid: N/A 
           ID-4: /mnt/td raw size: N/A size: 1024.00 TiB used: 0 KiB (0.0%) fs: fuse.rclone 
           source: ERR-102 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: HP LaserJet 1020 type: Printer driver: usblp interfaces: 1 
           rev: 2.0 speed: 480 Mb/s chip ID: 03f0:2b17 Device-2: 1-1.4:4 info: HP Deskjet 2050 J510 type:  driver: usblp 
           interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 03f0:8711 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 7825:a2a4 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 
           1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.0% command: embyserver pid: 5178 mem: 149.0 MiB (3.9%) 
           2: cpu: 0.5% command: [kworker/0:1-mm_percpu_wq] pid: 28856 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: [irq/39-mmc0] pid: 94 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: rclone pid: 364 mem: 329.9 MiB (8.7%) 
           5: cpu: 0.3% command: [kworker/0:0-events] pid: 28008 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 329.9 MiB (8.7%) command: rclone pid: 364 cpu: 0.3% 
           2: mem: 149.0 MiB (3.9%) command: embyserver pid: 5178 cpu: 1.0% 
           3: mem: 49.3 MiB (1.3%) command: pm2 pid: 976 cpu: 0.0% 
           4: mem: 45.9 MiB (1.2%) command: rclone pid: 362 cpu: 0.0% 
           5: mem: 16.2 MiB (0.4%) command: php-cgi pid: 931 cpu: 0.0% 
Info:      Processes: 149 Uptime: 22h 06m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26365 - Brand: Western Digital Blue 2.5" HDD