Benchmark #26404 - pibenchmarks.com

Brand: Crucial MX300 M.2 Series
SSD (2.5" SATA)
#449 / 1,679
23
#371 / 1,679
#358 / 984
#35 / 370
8,051
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se Amazon.sg

Overview
2020-06-04 18:14:36
#26,404
7,776
-275 (-3.54%)
Anonymous

Storage Details
Crucial MX300 M.2 Series
SSD (2.5" SATA)
275G
SSD
Crucial
CT275MX300SSD4
less than 1.8 inch
SATA
3.00
5,000
1d6b:1153
0x1d6b (Linux Foundation)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
178 MB/s
273.95 MB/s
247.66 MB/s
7,636 IOPS
19,248 IOPS
30,544 KB/s
76,992 KB/s
31,917 KB/s
26,017 KB/s
16,349 KB/s
31,874 KB/s

inxi Results
System: Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=8dc36a89-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.81 GiB used: 175.4 MiB (4.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: deprecated dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 256.17 GiB used: 5.86 GiB (2.3%) ID-1: /dev/sda type: USB vendor: Crucial model: CT275MX300SSD4 family: /Micron MX1/2/300, M5/600, 1100 Client SSDs size: 256.17 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: M0CR060 temp: 50 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 5 Old-Age: UDMA CRC errors: 7014 alert: Bad cable/connection? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 255.92 GiB size: 250.90 GiB (98.04%) used: 5.81 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.5% command: init pid: 1 mem: 8.05 MiB (0.2%) 2: cpu: 1.2% command: packagekitd pid: 1927 mem: 12.8 MiB (0.3%) 3: cpu: 0.7% command: bash pid: 1781 mem: 2.75 MiB (0.0%) 4: cpu: 0.4% command: [kworker/0:2+events_freezable] pid: 85 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: systemd-journald pid: 132 mem: 7.48 MiB (0.1%) Memory top: 5 1: mem: 16.8 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 504 cpu: 0.1% 2: mem: 14.4 MiB (0.3%) command: networkmanager pid: 397 cpu: 0.2% 3: mem: 12.8 MiB (0.3%) command: packagekitd pid: 1927 cpu: 1.2% 4: mem: 10.6 MiB (0.2%) command: udisksd pid: 404 cpu: 0.2% 5: mem: 8.43 MiB (0.2%) command: polkitd pid: 483 cpu: 0.0% Info: Processes: 143 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 5.4.42-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=8dc36a89-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Memory:    RAM: total: 3.81 GiB used: 175.4 MiB (4.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: deprecated dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 256.17 GiB used: 5.86 GiB (2.3%) 
           ID-1: /dev/sda type: USB vendor: Crucial model: CT275MX300SSD4 
           family: /Micron MX1/2/300, M5/600, 1100 Client SSDs size: 256.17 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: M0CR060 
           temp: 50 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 5 Old-Age: 
           UDMA CRC errors: 7014 alert: Bad cable/connection? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 255.92 GiB size: 250.90 GiB (98.04%) used: 5.81 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.0%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.5% command: init pid: 1 mem: 8.05 MiB (0.2%) 
           2: cpu: 1.2% command: packagekitd pid: 1927 mem: 12.8 MiB (0.3%) 
           3: cpu: 0.7% command: bash pid: 1781 mem: 2.75 MiB (0.0%) 
           4: cpu: 0.4% command: [kworker/0:2+events_freezable] pid: 85 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: systemd-journald pid: 132 mem: 7.48 MiB (0.1%) 
           Memory top: 5 
           1: mem: 16.8 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 504 cpu: 0.1% 
           2: mem: 14.4 MiB (0.3%) command: networkmanager pid: 397 cpu: 0.2% 
           3: mem: 12.8 MiB (0.3%) command: packagekitd pid: 1927 cpu: 1.2% 
           4: mem: 10.6 MiB (0.2%) command: udisksd pid: 404 cpu: 0.2% 
           5: mem: 8.43 MiB (0.2%) command: polkitd pid: 483 cpu: 0.0% 
Info:      Processes: 143 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26404 - Brand: Crucial MX300 M.2 Series