Benchmark #26486 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#234 / 1,672
60
#1,241 / 1,672
#21 / 93
#23 / 89
1,332
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2020-06-05 22:11:57
#26,486
3,214
+1,882 (+58.56%)
MoreRad
Lexar S47 128GB USB 3.1 Drive on RPi4

Storage Details
Lexar USB Flash Drive
USB Flash
0G
USB Flash
Lexar
USBFlashDrive
3.20
5,000
21c4:0cd1
0x21c4
0x0cd1
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
49.5 MB/s
151.36 MB/s
139.88 MB/s
4,041 IOPS
3,268 IOPS
16,164 KB/s
13,073 KB/s
16,392 KB/s
14,892 KB/s
12,505 KB/s
13,651 KB/s

inxi Results
System: Kernel: 5.4.44-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=716c4aea-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: docker, lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Device-1: hidpp_battery_1 model: Logitech K800 charge: High status: Discharging Memory: RAM: total: 3.81 GiB used: 470.3 MiB (12.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") s-diag: 777mm (30.6") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 123 size: 527x296mm (20.7x11.7") diag: 604mm (23.8") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.44-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: down mac: IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth0c10be7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth27dbf2e state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vetha88a11a state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethdd5ea98 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethf14cdb0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 119.25 GiB used: 16.47 GiB (13.8%) ID-1: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 119.25 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 116.62 GiB (98.01%) used: 8.21 GiB (7.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 ID-3: /var/lib/docker/overlay2/0d98608abd221ca06268cec7aeb4bfb71b3b331e6529fb4f2f0c4f2c62b89df9/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/22b13a535d1bc58c3b6ca0f47fb836902116ac42348ca04f47512b6ec9f15a5a/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/3188d3af69e2694143e22d53988992e99a61df343f510a278f0f3567f6d737cf/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/7dfaed0ef469af9291c4775e2fa98f7e6806fedae5368a45e15bed0a440b0174/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/e2a0b6be6d0c0b1e1411f9fbc9fe62b9ef3309c61c8f572c620798e7a2daf710/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/eff7e69ea0605b6256665d623d877ea00451ff46e100c07dee1480b071ec61ca/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c537 Device-2: 1-1.4:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 21c4:0cd1 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.3% command: lxterminal pid: 19640 mem: 27.0 MiB (0.7%) 2: cpu: 2.0% command: python3 pid: 3467 mem: 83.8 MiB (2.1%) 3: cpu: 1.5% command: lxpanel pid: 904 mem: 29.6 MiB (0.7%) 4: cpu: 0.6% command: avahi-daemon: pid: 392 mem: 3.14 MiB (0.0%) 5: cpu: 0.6% command: xorg pid: 576 mem: 77.6 MiB (2.0%) Memory top: 5 1: mem: 83.8 MiB (2.1%) command: python3 pid: 3467 cpu: 2.0% 2: mem: 77.6 MiB (2.0%) command: xorg pid: 576 cpu: 0.6% 3: mem: 63.3 MiB (1.6%) command: dockerd pid: 491 cpu: 0.3% 4: mem: 42.2 MiB (1.1%) command: docker pid: 890 cpu: 0.0% 5: mem: 37.3 MiB (0.9%) command: python3 pid: 1582 cpu: 0.2% Info: Processes: 205 Uptime: 1h 13m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 5.4.44-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=716c4aea-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: docker, lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Battery:   Device-1: hidpp_battery_1 model: Logitech K800 charge: High 
           status: Discharging 
Memory:    RAM: total: 3.81 GiB used: 470.3 MiB (12.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
           s-diag: 777mm (30.6") 
           Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 123 size: 527x296mm (20.7x11.7") 
           diag: 604mm (23.8") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.44-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth0c10be7 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth27dbf2e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vetha88a11a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethdd5ea98 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethf14cdb0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 119.25 GiB used: 16.47 GiB (13.8%) 
           ID-1: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 119.25 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 116.62 GiB (98.01%) used: 8.21 GiB (7.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 
           ID-3: /var/lib/docker/overlay2/0d98608abd221ca06268cec7aeb4bfb71b3b331e6529fb4f2f0c4f2c62b89df9/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/22b13a535d1bc58c3b6ca0f47fb836902116ac42348ca04f47512b6ec9f15a5a/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/3188d3af69e2694143e22d53988992e99a61df343f510a278f0f3567f6d737cf/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/7dfaed0ef469af9291c4775e2fa98f7e6806fedae5368a45e15bed0a440b0174/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/e2a0b6be6d0c0b1e1411f9fbc9fe62b9ef3309c61c8f572c620798e7a2daf710/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/eff7e69ea0605b6256665d623d877ea00451ff46e100c07dee1480b071ec61ca/merged raw size: N/A size: 116.62 GiB used: 8.21 GiB (7.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech type: Mouse,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c537 
           Device-2: 1-1.4:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 
           speed: 5 Gb/s chip ID: 21c4:0cd1 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.3% command: lxterminal pid: 19640 mem: 27.0 MiB (0.7%) 
           2: cpu: 2.0% command: python3 pid: 3467 mem: 83.8 MiB (2.1%) 
           3: cpu: 1.5% command: lxpanel pid: 904 mem: 29.6 MiB (0.7%) 
           4: cpu: 0.6% command: avahi-daemon: pid: 392 mem: 3.14 MiB (0.0%) 
           5: cpu: 0.6% command: xorg pid: 576 mem: 77.6 MiB (2.0%) 
           Memory top: 5 
           1: mem: 83.8 MiB (2.1%) command: python3 pid: 3467 cpu: 2.0% 
           2: mem: 77.6 MiB (2.0%) command: xorg pid: 576 cpu: 0.6% 
           3: mem: 63.3 MiB (1.6%) command: dockerd pid: 491 cpu: 0.3% 
           4: mem: 42.2 MiB (1.1%) command: docker pid: 890 cpu: 0.0% 
           5: mem: 37.3 MiB (0.9%) command: python3 pid: 1582 cpu: 0.2% 
Info:      Processes: 205 Uptime: 1h 13m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26486 - Brand: Lexar USB Flash Drive