Benchmark #26530 - pibenchmarks.com

Brand: Intenso SD (SD16G)
C10
#868 / 1,679
5
#1,555 / 1,679
#349 / 394
567
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-06-06 12:58:13
#26,530
401
-166 (-41.40%)
LuckyDog
Intenso 16GB SD on Pi4 4GB

Secure Digital (SD) Card Details
Intenso SD (SD16G)
C10
14.3G
SD
Lexar
SD16G
SD
6.00
0x27
PH
6.0
05/2019
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
5.5 MB/s
21.32 MB/s
19.58 MB/s
14 IOPS
1,843 IOPS
57 KB/s
7,374 KB/s
6,023 KB/s
1,303 KB/s
4,901 KB/s
61 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:1561:u console=ttyAMA0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 698.5 MiB (17.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 178x80 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2003:c9:df4a:4a00:20c4:aff3:9a27:bcc8/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::ce4f:a00b:cfde:fb05/64 scope: link WAN IP: 79.221.X.X Drives: Local Storage: total: 243.69 GiB used: 14.99 GiB (6.1%) ID-1: /dev/mmcblk0 model: SD16G size: 14.52 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk drive model: SDSSDP128G family: based SSDs size: 117.38 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s drive rev: 0204 drive rev: 3.2.0 temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED on: 143d 5h cycles: 1658 read: 2.45 TiB written: 1.22 TiB ID-3: /dev/sdb type: USB model: N/A family: based SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0204 drive rev: EXT0BB0Q temp: 30 C scheme: GPT SMART: yes state: enabled health: PASSED on: 1y 96d 17h cycles: 1126 written: 20.35 TiB Pre-Fail: reallocated sector: 95 threshold: 10 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.27 GiB size: 14.01 GiB (98.23%) used: 6.61 GiB (47.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 ID-3: /opt/daten raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 8.32 GiB (7.6%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 96c95e1a-b9cd-4729-a553-68d34051a113 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 ID-2: /dev/sda2 size: 14.27 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Device-2: 2-2:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/ubnt-unifi.list 1: deb http://www.ubnt.com/downloads/unifi/debian stable ubiquiti Active apt repos in: /etc/apt/sources.list.d/webmin.list 1: deb https://download.webmin.com/download/repository sarge contrib Processes: CPU top: 5 1: cpu: 8.0% command: java pid: 1286 mem: 151.3 MiB (3.8%) 2: cpu: 2.8% command: perl pid: 775 mem: 82.7 MiB (2.0%) 3: cpu: 1.3% command: apache2 pid: 1054 mem: 44.4 MiB (1.1%) 4: cpu: 0.9% command: apache2 pid: 1061 mem: 37.1 MiB (0.9%) 5: cpu: 0.6% command: unifi pid: 725 mem: 47.4 MiB (1.1%) Memory top: 5 1: mem: 151.3 MiB (3.8%) command: java pid: 1286 cpu: 8.0% 2: mem: 121.0 MiB (3.0%) command: mysqld pid: 711 cpu: 0.3% 3: mem: 100.1 MiB (2.5%) command: bin/mongod pid: 1349 cpu: 0.5% 4: mem: 82.7 MiB (2.0%) command: perl pid: 775 cpu: 2.8% 5: mem: 67.1 MiB (1.6%) command: perl pid: 1245 cpu: 0.0% Info: Processes: 137 Uptime: 12m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.1.01

inxi Results

System:    Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:1561:u console=ttyAMA0,115200 console=tty1 
           root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.88 GiB used: 698.5 MiB (17.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 178x80 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2003:c9:df4a:4a00:20c4:aff3:9a27:bcc8/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::ce4f:a00b:cfde:fb05/64 scope: link 
           WAN IP: 79.221.X.X 
Drives:    Local Storage: total: 243.69 GiB used: 14.99 GiB (6.1%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.52 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk drive model: SDSSDP128G 
           family: based SSDs size: 117.38 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
           drive rev: 0204 drive rev: 3.2.0 temp: 37 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 143d 5h cycles: 1658 read: 2.45 TiB written: 1.22 TiB 
           ID-3: /dev/sdb type: USB model: N/A family: based SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rev: 0204 drive rev: EXT0BB0Q temp: 30 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 1y 96d 17h cycles: 1126 written: 20.35 TiB Pre-Fail: 
           reallocated sector: 95 threshold: 10 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.27 GiB size: 14.01 GiB (98.23%) used: 6.61 GiB (47.2%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
           ID-3: /opt/daten raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 8.32 GiB (7.6%) fs: ext4 block size: 4096 B 
           dev: /dev/sdb1 label: N/A uuid: 96c95e1a-b9cd-4729-a553-68d34051a113 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/sda2 size: 14.27 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 
           Device-2: 2-2:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/ubnt-unifi.list 
           1: deb http://www.ubnt.com/downloads/unifi/debian stable ubiquiti
           Active apt repos in: /etc/apt/sources.list.d/webmin.list 
           1: deb https://download.webmin.com/download/repository sarge contrib
Processes: CPU top: 5 
           1: cpu: 8.0% command: java pid: 1286 mem: 151.3 MiB (3.8%) 
           2: cpu: 2.8% command: perl pid: 775 mem: 82.7 MiB (2.0%) 
           3: cpu: 1.3% command: apache2 pid: 1054 mem: 44.4 MiB (1.1%) 
           4: cpu: 0.9% command: apache2 pid: 1061 mem: 37.1 MiB (0.9%) 
           5: cpu: 0.6% command: unifi pid: 725 mem: 47.4 MiB (1.1%) 
           Memory top: 5 
           1: mem: 151.3 MiB (3.8%) command: java pid: 1286 cpu: 8.0% 
           2: mem: 121.0 MiB (3.0%) command: mysqld pid: 711 cpu: 0.3% 
           3: mem: 100.1 MiB (2.5%) command: bin/mongod pid: 1349 cpu: 0.5% 
           4: mem: 82.7 MiB (2.0%) command: perl pid: 775 cpu: 2.8% 
           5: mem: 67.1 MiB (1.6%) command: perl pid: 1245 cpu: 0.0% 
Info:      Processes: 137 Uptime: 12m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh 
           inxi: 3.1.01

Benchmark #26530 - Brand: Intenso SD (SD16G)