Benchmark #26557 - pibenchmarks.com

Brand: Kingston DataTraveler DTR30
USB Flash
#120 / 1,679
148
#1,427 / 1,679
#47 / 94
#45 / 89
983
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-06 22:40:23
#26,557
549
-434 (-79.05%)
Anonymous
Kingston DataTraveler 100 64GB

Storage Details
Kingston DataTraveler DTR30
USB Flash
57.5G
USB Flash
Kingston
DataTraveler3.0
2.00
480
0951:1666
0x0951 (Kingston Technology)
0x1666 (DataTraveler 100 G3/G4/SE9 G2/50)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
4.4 MB/s
27.46 MB/s
26.31 MB/s
104 IOPS
1,638 IOPS
416 KB/s
6,555 KB/s
12,873 KB/s
1,523 KB/s
6,473 KB/s
298 KB/s

inxi Results
System: Host: samwise Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=bf16497b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 291.5 MiB (29.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 176x54 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::91e4:eca5:3933:3df4/64 scope: link IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::e1af:1fed:dedb:e73f/64 scope: link WAN IP: 135.23.X.X Drives: Local Storage: total: 57.76 GiB used: 5.77 GiB (10.0%) ID-1: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 57.76 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.51 GiB size: 56.54 GiB (98.32%) used: 5.72 GiB (10.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 1.3 MiB (1.3%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: Kingston DataTraveler 100 G3/G4/SE9 G2 type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0951:1666 Device-3: 1-1.1.3:6 info: Microsoft Nano Transceiver v1.0 for Bluetooth type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:0745 Device-4: 1-1.2:4 info: N/A type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 0.0 speed: 12 Mb/s chip ID: 222a:0001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.1% command: [kworker/1:0-mm_percpu_wq] pid: 5905 mem: 0.00 MiB (0.0%) 2: cpu: 1.0% command: sed pid: 7067 mem: 0.69 MiB (0.0%) 3: cpu: 0.1% command: init pid: 1 mem: 8.05 MiB (0.8%) 4: cpu: 0.1% command: avahi-daemon: pid: 359 mem: 3.03 MiB (0.3%) 5: cpu: 0.1% command: unbound pid: 3466 mem: 16.4 MiB (1.7%) Memory top: 5 1: mem: 43.0 MiB (4.6%) command: xorg pid: 500 cpu: 0.0% 2: mem: 26.5 MiB (2.8%) command: lxpanel pid: 897 cpu: 0.0% 3: mem: 21.3 MiB (2.2%) command: pcmanfm pid: 898 cpu: 0.0% 4: mem: 16.4 MiB (1.7%) command: unbound pid: 3466 cpu: 0.1% 5: mem: 12.9 MiB (1.3%) command: packagekitd pid: 6073 cpu: 0.0% Info: Processes: 161 Uptime: 4h 14m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.01

inxi Results

System:    Host: samwise Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=bf16497b-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 
Memory:    RAM: total: 1002.1 MiB used: 291.5 MiB (29.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 176x54 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::91e4:eca5:3933:3df4/64 scope: link 
           IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::e1af:1fed:dedb:e73f/64 scope: link 
           WAN IP: 135.23.X.X 
Drives:    Local Storage: total: 57.76 GiB used: 5.77 GiB (10.0%) 
           ID-1: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 57.76 GiB block size: physical: 512 B 
           logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 57.51 GiB size: 56.54 GiB (98.32%) used: 5.72 GiB (10.1%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: A764-6923 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 1.3 MiB (1.3%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:5 info: Kingston DataTraveler 100 G3/G4/SE9 G2 type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0951:1666 
           Device-3: 1-1.1.3:6 info: Microsoft Nano Transceiver v1.0 for Bluetooth type: Keyboard,Mouse,HID 
           driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:0745 
           Device-4: 1-1.2:4 info: N/A type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 0.0 speed: 12 Mb/s 
           chip ID: 222a:0001 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.1% command: [kworker/1:0-mm_percpu_wq] pid: 5905 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.0% command: sed pid: 7067 mem: 0.69 MiB (0.0%) 
           3: cpu: 0.1% command: init pid: 1 mem: 8.05 MiB (0.8%) 
           4: cpu: 0.1% command: avahi-daemon: pid: 359 mem: 3.03 MiB (0.3%) 
           5: cpu: 0.1% command: unbound pid: 3466 mem: 16.4 MiB (1.7%) 
           Memory top: 5 
           1: mem: 43.0 MiB (4.6%) command: xorg pid: 500 cpu: 0.0% 
           2: mem: 26.5 MiB (2.8%) command: lxpanel pid: 897 cpu: 0.0% 
           3: mem: 21.3 MiB (2.2%) command: pcmanfm pid: 898 cpu: 0.0% 
           4: mem: 16.4 MiB (1.7%) command: unbound pid: 3466 cpu: 0.1% 
           5: mem: 12.9 MiB (1.3%) command: packagekitd pid: 6073 cpu: 0.0% 
Info:      Processes: 161 Uptime: 4h 14m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.01

Benchmark #26557 - Brand: Kingston DataTraveler DTR30