Benchmark #26635 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,675
2,853
#642 / 1,675
#620 / 984
#157 / 370
6,244
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-08 06:42:39
#26,635
2,577
-3,667 (-142.30%)
Anonymous
Kingston 120GB SSD on Pi 3

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
120G
SSD
Kingston
SA400S37120G
SATA
2.00
480
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
250 (-150)
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
28.8 MB/s
26.12 MB/s
23.21 MB/s
2,892 IOPS
2,773 IOPS
11,570 KB/s
11,095 KB/s
8,998 KB/s
13,080 KB/s
11,175 KB/s
12,228 KB/s

inxi Results
System: Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 518.3 MiB (51.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 121x33 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 111.79 GiB used: 9.19 GiB (8.2%) ID-1: /dev/sda type: USB vendor: Kingston model: SA400S37120G size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0301 drive rev: 03090004 temp: 24 C scheme: MBR SMART: yes state: enabled health: PASSED on: 156d 14h cycles: 47 read: 2.20 TiB written: 18.09 TiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 9.15 GiB (8.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 512.0 MiB used: 110.2 MiB (21.5%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-3: 1-1.2:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-4: 1-1.3:6 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 26.7% command: hass started by: python3 pid: 29646 mem: 147.4 MiB (15.9%) 2: cpu: 4.1% command: mysqld pid: 555 mem: 176.7 MiB (19.0%) 3: cpu: 0.9% command: smartd pid: 26622 mem: 3.13 MiB (0.3%) 4: cpu: 0.6% command: [usb-storage] pid: 85 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: rngd pid: 381 mem: 0.75 MiB (0.0%) Memory top: 5 1: mem: 176.7 MiB (19.0%) command: mysqld pid: 555 cpu: 4.1% 2: mem: 147.4 MiB (15.9%) command: hass started by: python3 pid: 29646 cpu: 26.7% 3: mem: 6.18 MiB (0.6%) command: systemd pid: 26139 cpu: 0.1% 4: mem: 6.06 MiB (0.6%) command: systemd-journald pid: 118 cpu: 0.0% 5: mem: 5.98 MiB (0.6%) command: sshd: pid: 26133 cpu: 0.1% Info: Processes: 138 Uptime: 10d 3h 36m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 518.3 MiB (51.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 121x33 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 9.19 GiB (8.2%) 
           ID-1: /dev/sda type: USB vendor: Kingston model: SA400S37120G size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0301 drive rev: 03090004 temp: 24 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 156d 14h cycles: 47 read: 2.20 TiB 
           written: 18.09 TiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 9.15 GiB (8.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 512.0 MiB used: 110.2 MiB (21.5%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:5 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-3: 1-1.2:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-4: 1-1.3:6 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 26.7% command: hass started by: python3 pid: 29646 mem: 147.4 MiB (15.9%) 
           2: cpu: 4.1% command: mysqld pid: 555 mem: 176.7 MiB (19.0%) 
           3: cpu: 0.9% command: smartd pid: 26622 mem: 3.13 MiB (0.3%) 
           4: cpu: 0.6% command: [usb-storage] pid: 85 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: rngd pid: 381 mem: 0.75 MiB (0.0%) 
           Memory top: 5 
           1: mem: 176.7 MiB (19.0%) command: mysqld pid: 555 cpu: 4.1% 
           2: mem: 147.4 MiB (15.9%) command: hass started by: python3 pid: 29646 cpu: 26.7% 
           3: mem: 6.18 MiB (0.6%) command: systemd pid: 26139 cpu: 0.1% 
           4: mem: 6.06 MiB (0.6%) command: systemd-journald pid: 118 cpu: 0.0% 
           5: mem: 5.98 MiB (0.6%) command: sshd: pid: 26133 cpu: 0.1% 
Info:      Processes: 138 Uptime: 10d 3h 36m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26635 - Brand: Kingston A400S Series