Benchmark #26700 - pibenchmarks.com

Brand: Lexar SD Professional 1000X
C10 V90 U3
#306 / 1,675
42
#1,417 / 1,675
#259 / 391
992
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.se Amazon.sg

Overview
2020-06-08 21:26:09
#26,700
1,145
+153 (+13.36%)
Anonymous

Secure Digital (SD) Card Details
Lexar SD Professional 1000X
C10 V90 U3
29.7G
SD
Lexar
7YDLP
SDHC
5.00
0x27
PH
0.7
11/2016
Class 10
None
U3
V90

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
2,000 (+500)
750 (+250)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
37.9 MB/s
40.85 MB/s
40.39 MB/s
177 IOPS
3,939 IOPS
708 KB/s
15,756 KB/s
12,380 KB/s
1,259 KB/s
8,466 KB/s
1,166 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=70bf3e9e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 758.9 MiB (19.0%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: Logitech type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.1.4:5 chip ID: 046d:0822 Server: ALSA v: k4.19.118-v7l+ Network: Device-1: D-Link type: USB driver: rtl88XXau bus ID: 1-1.1.3:4 chip ID: 2001:3315 IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: eth0 state: down mac: WAN IP: Drives: Local Storage: total: 88.34 GiB used: 11.80 GiB (13.4%) ID-1: /dev/mmcblk0 model: 7YDLP size: 29.91 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD family: based SSDs size: 58.44 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0001 drive rev: 6EB 1030 temp: -20 C scheme: MBR SMART: yes state: enabled health: FAILED! on: 2 hrs read: 0 KiB written: 0 KiB Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.65 GiB size: 29.13 GiB (98.24%) used: 11.66 GiB (40.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70A2-8001 ID-3: /media/pi/01D63DF211DC5280 raw size: 58.44 GiB size: 58.44 GiB (100.00%) used: 87.8 MiB (0.1%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: N/A uuid: 01D63DF211DC5280 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2812 Device-1: 1-1.1.3:4 info: D-Link type: Network driver: rtl88XXau interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 2001:3315 Device-2: 1-1.1.4:5 info: Logitech type: Video,Audio driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 046d:0822 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-1:2 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 Device-3: 2-2:3 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.9% command: lxpanel pid: 805 mem: 29.2 MiB (0.8%) 2: cpu: 0.6% command: [kworker/u8:0-events_unbound] pid: 21212 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: xorg pid: 537 mem: 53.6 MiB (1.5%) 4: cpu: 0.3% command: [rtw_cmd_thread] pid: 544 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: smartd pid: 21644 mem: 3.37 MiB (0.0%) Memory top: 5 1: mem: 53.6 MiB (1.5%) command: xorg pid: 537 cpu: 0.4% 2: mem: 48.5 MiB (1.3%) command: lxterminal pid: 4079 cpu: 0.0% 3: mem: 29.2 MiB (0.8%) command: lxpanel pid: 805 cpu: 0.9% 4: mem: 27.8 MiB (0.8%) command: vncserver-x11-core pid: 488 cpu: 0.0% 5: mem: 21.0 MiB (0.6%) command: pcmanfm pid: 807 cpu: 0.0% Info: Processes: 171 Uptime: 2h 48m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=70bf3e9e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 758.9 MiB (19.0%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 
           Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: Logitech type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.1.4:5 
           chip ID: 046d:0822 Server: ALSA v: k4.19.118-v7l+ 
Network:   Device-1: D-Link type: USB driver: rtl88XXau bus ID: 1-1.1.3:4 chip ID: 2001:3315 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: eth0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 88.34 GiB used: 11.80 GiB (13.4%) 
           ID-1: /dev/mmcblk0 model: 7YDLP size: 29.91 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD 
           family: based SSDs size: 58.44 GiB block size: physical: 512 B logical: 512 B sata: 3.0 
           speed: 6.0 Gb/s rev: 0001 drive rev: 6EB 1030 
           temp: -20 C scheme: MBR 
           SMART: yes state: enabled health: FAILED! on: 2 hrs read: 0 KiB written: 0 KiB 
           Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.65 GiB size: 29.13 GiB (98.24%) used: 11.66 GiB (40.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70A2-8001 
           ID-3: /media/pi/01D63DF211DC5280 raw size: 58.44 GiB size: 58.44 GiB (100.00%) 
           used: 87.8 MiB (0.1%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: 01D63DF211DC5280 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:2812 
           Device-1: 1-1.1.3:4 info: D-Link type: Network driver: rtl88XXau interfaces: 1 rev: 2.0 
           speed: 480 Mb/s chip ID: 2001:3315 Device-2: 1-1.1.4:5 info: Logitech type: Video,Audio driver: snd-usb-audio,uvcvideo 
           interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 046d:0822 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-1:2 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 
           Device-3: 2-2:3 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.9% command: lxpanel pid: 805 mem: 29.2 MiB (0.8%) 
           2: cpu: 0.6% command: [kworker/u8:0-events_unbound] pid: 21212 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: xorg pid: 537 mem: 53.6 MiB (1.5%) 
           4: cpu: 0.3% command: [rtw_cmd_thread] pid: 544 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: smartd pid: 21644 mem: 3.37 MiB (0.0%) 
           Memory top: 5 
           1: mem: 53.6 MiB (1.5%) command: xorg pid: 537 cpu: 0.4% 
           2: mem: 48.5 MiB (1.3%) command: lxterminal pid: 4079 cpu: 0.0% 
           3: mem: 29.2 MiB (0.8%) command: lxpanel pid: 805 cpu: 0.9% 
           4: mem: 27.8 MiB (0.8%) command: vncserver-x11-core pid: 488 cpu: 0.0% 
           5: mem: 21.0 MiB (0.6%) command: pcmanfm pid: 807 cpu: 0.0% 
Info:      Processes: 171 Uptime: 2h 48m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26700 - Brand: Lexar SD Professional 1000X