Benchmark #26760 - pibenchmarks.com

Brand: Panasonic SD
A1 C10 U1
#129 / 1,702
148
#1,387 / 1,702
#245 / 406
1,099
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2020-06-10 04:11:03
#26,760
1,203
+104 (+8.65%)
Anonymous
sad

Secure Digital (SD) Card Details
Panasonic SD
A1 C10 U1
11.8G
SD
Panasonic
Y016U
SD
6.00
0x01
PA
1.3
01/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.7 MB/s
40.72 MB/s
40.76 MB/s
655 IOPS
2,753 IOPS
2,622 KB/s
11,012 KB/s
11,025 KB/s
2,645 KB/s
8,689 KB/s
2,264 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:3840x2160M@24 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 324.5 MiB (16.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 597x336mm (23.5x13.2") diag: 685mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 480.21 GiB used: 14.81 GiB (3.1%) ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 2101 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 11.79 GiB size: 11.47 GiB (97.37%) used: 7.34 GiB (64.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 013C-173E ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.2 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot uuid: 013C-173E ID-4: /media/pi/root raw size: 463.10 GiB size: 454.83 GiB (98.21%) used: 7.37 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f ID-4: /dev/sda1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.6% command: vncserver-x11-core pid: 490 mem: 32.0 MiB (1.6%) 2: cpu: 1.4% command: init pid: 1 mem: 8.23 MiB (0.4%) 3: cpu: 1.4% command: xorg pid: 527 mem: 54.2 MiB (2.7%) 4: cpu: 0.4% command: lxterminal pid: 1210 mem: 47.4 MiB (2.4%) 5: cpu: 0.3% command: lxpanel pid: 649 mem: 27.8 MiB (1.4%) Memory top: 5 1: mem: 54.2 MiB (2.7%) command: xorg pid: 527 cpu: 1.4% 2: mem: 47.4 MiB (2.4%) command: lxterminal pid: 1210 cpu: 0.4% 3: mem: 32.0 MiB (1.6%) command: vncserver-x11-core pid: 490 cpu: 1.6% 4: mem: 27.8 MiB (1.4%) command: lxpanel pid: 649 cpu: 0.3% 5: mem: 24.0 MiB (1.2%) command: pcmanfm pid: 651 cpu: 0.3% Info: Processes: 171 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:3840x2160M@24 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet 
           splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 324.5 MiB (16.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 597x336mm (23.5x13.2") 
           diag: 685mm (27") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 480.21 GiB used: 14.81 GiB (3.1%) 
           ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 465.76 GiB 
           block size: physical: 4096 B logical: 512 B rev: 2101 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 11.79 GiB size: 11.47 GiB (97.37%) used: 7.34 GiB (64.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 013C-173E 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 51.2 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot 
           uuid: 013C-173E 
           ID-4: /media/pi/root raw size: 463.10 GiB size: 454.83 GiB (98.21%) 
           used: 7.37 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root 
           uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f 
           ID-4: /dev/sda1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 
           ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.6% command: vncserver-x11-core pid: 490 mem: 32.0 MiB (1.6%) 
           2: cpu: 1.4% command: init pid: 1 mem: 8.23 MiB (0.4%) 
           3: cpu: 1.4% command: xorg pid: 527 mem: 54.2 MiB (2.7%) 
           4: cpu: 0.4% command: lxterminal pid: 1210 mem: 47.4 MiB (2.4%) 
           5: cpu: 0.3% command: lxpanel pid: 649 mem: 27.8 MiB (1.4%) 
           Memory top: 5 
           1: mem: 54.2 MiB (2.7%) command: xorg pid: 527 cpu: 1.4% 
           2: mem: 47.4 MiB (2.4%) command: lxterminal pid: 1210 cpu: 0.4% 
           3: mem: 32.0 MiB (1.6%) command: vncserver-x11-core pid: 490 cpu: 1.6% 
           4: mem: 27.8 MiB (1.4%) command: lxpanel pid: 649 cpu: 0.3% 
           5: mem: 24.0 MiB (1.2%) command: pcmanfm pid: 651 cpu: 0.3% 
Info:      Processes: 171 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26760 - Brand: Panasonic SD