Benchmark #26773 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,700
931
#433 / 1,700
#417 / 989
#52 / 370
7,549
	Amazon.com AliExpress

Overview
2020-06-10 06:26:17
#26,773
8,872
+1,323 (+14.91%)
Anonymous
asdf

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
463.1G
SSD
JMicron
JMicronGeneric
3.00
5,000
152d:0583
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0583 (Digital Camera)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
2 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
189 MB/s
314.19 MB/s
301.88 MB/s
9,780 IOPS
19,015 IOPS
39,121 KB/s
76,063 KB/s
32,975 KB/s
28,383 KB/s
26,360 KB/s
35,309 KB/s

inxi Results
System: Host: c3po Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:3840x2160M@24 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 601.9 MiB (29.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 597x336mm (23.5x13.2") diag: 685mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a02:a457:3552:1:5d53:7526:e3a4:dc16/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2a02:a457:3552:1:2eaf:fea:2fec:2dd8/64 type: dynamic noprefixroute scope: global IP v6: fe80::46c2:e15:d952:afe1/64 type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 480.21 GiB used: 7.48 GiB (1.6%) ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 2101 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 463.10 GiB size: 454.83 GiB (98.21%) used: 7.38 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 013C-173E ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.2 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot uuid: 013C-173E Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f ID-4: /dev/mmcblk0p7 size: 11.79 GiB fs: ext4 label: root uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 ID-5: /dev/sda1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 ID-6: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-7: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.2% command: scratch-desktop pid: 1347 mem: 261.4 MiB (13.4%) 2: cpu: 1.7% command: xorg pid: 537 mem: 53.7 MiB (2.7%) 3: cpu: 1.4% command: vncserver-x11-core pid: 483 mem: 31.7 MiB (1.6%) 4: cpu: 1.1% command: scratch-desktop pid: 1309 mem: 92.0 MiB (4.7%) 5: cpu: 1.0% command: lxterminal pid: 1234 mem: 47.9 MiB (2.4%) Memory top: 5 1: mem: 261.4 MiB (13.4%) command: scratch-desktop pid: 1347 cpu: 12.2% 2: mem: 92.0 MiB (4.7%) command: scratch-desktop pid: 1309 cpu: 1.1% 3: mem: 73.6 MiB (3.7%) command: scratch-desktop pid: 1339 cpu: 0.4% 4: mem: 67.5 MiB (3.4%) command: scratch-desktop pid: 1348 cpu: 0.1% 5: mem: 53.7 MiB (2.7%) command: xorg pid: 537 cpu: 1.7% Info: Processes: 168 Uptime: 14m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.01

inxi Results

System:
  Host: c3po Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:3840x2160M@24 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=/dev/sda7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
  quiet splash plymouth.ignore-serial-consoles 
  Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
  Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: b03111 
Memory:
  RAM: total: 1.97 GiB used: 601.9 MiB (29.9%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting 
  unloaded: fbdev display ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") 
  s-diag: 582mm (22.9") 
  Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 
  size: 597x336mm (23.5x13.2") diag: 685mm (27") 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.118-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: 2a02:a457:3552:1:5d53:7526:e3a4:dc16/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: 2a02:a457:3552:1:2eaf:fea:2fec:2dd8/64 type: dynamic noprefixroute 
  scope: global 
  IP v6: fe80::46c2:e15:d952:afe1/64 type: noprefixroute scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:
  Local Storage: total: 480.21 GiB used: 7.48 GiB (1.6%) 
  ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic 
  size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
  rev: 2101 scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 463.10 GiB size: 454.83 GiB (98.21%) 
  used: 7.38 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda7 
  label: root uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 
  label: boot uuid: 013C-173E 
  ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.2 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda6 
  label: boot uuid: 013C-173E 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 2.37 GiB fs: vfat label: RECOVERY 
  uuid: C23B-D645 
  ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
  ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
  uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f 
  ID-4: /dev/mmcblk0p7 size: 11.79 GiB fs: ext4 label: root 
  uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 
  ID-5: /dev/sda1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 
  ID-6: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
  ID-7: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
  uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
  interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 12.2% command: scratch-desktop pid: 1347 mem: 261.4 MiB (13.4%) 
  2: cpu: 1.7% command: xorg pid: 537 mem: 53.7 MiB (2.7%) 
  3: cpu: 1.4% command: vncserver-x11-core pid: 483 mem: 31.7 MiB (1.6%) 
  4: cpu: 1.1% command: scratch-desktop pid: 1309 mem: 92.0 MiB (4.7%) 
  5: cpu: 1.0% command: lxterminal pid: 1234 mem: 47.9 MiB (2.4%) 
  Memory top: 5 
  1: mem: 261.4 MiB (13.4%) command: scratch-desktop pid: 1347 cpu: 12.2% 
  2: mem: 92.0 MiB (4.7%) command: scratch-desktop pid: 1309 cpu: 1.1% 
  3: mem: 73.6 MiB (3.7%) command: scratch-desktop pid: 1339 cpu: 0.4% 
  4: mem: 67.5 MiB (3.4%) command: scratch-desktop pid: 1348 cpu: 0.1% 
  5: mem: 53.7 MiB (2.7%) command: xorg pid: 537 cpu: 1.7% 
Info:
  Processes: 168 Uptime: 14m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.01

Benchmark #26773 - Brand: Undentified JMicron USB to SATA Adapter