Benchmark #26819 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#38 / 1,539
284
#551 / 1,539
#531 / 875
#164 / 363
6,003
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-11 04:58:23
#26,819
3,397
-2,606 (-76.71%)
Anonymous
Pi4 on SSD Kensimgton

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
SSD
Kingston
SV300S37A60G
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
114 MB/s
3,285 IOPS
2,639 IOPS
13,140 KB/s
10,556 KB/s
12,276 KB/s
9,469 KB/s
10,578 KB/s
11,557 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 64 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=03673bb8-37e1-496f-9d68-5f0ff020c1f0 qmap=de Console: tty 0 wm: gnome-shell dm: GDM3 3.28.3 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.79 GiB used: 1.66 GiB (43.8%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.6 compositor: gnome-shell driver: N/A note: display driver n/a Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 85.71 GiB used: 50.3 MiB (0.1%) ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: NORELSYS 106X drive model: SV300S37A60G family: Driven SSDs size: 55.90 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: BBF0 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4y 4d 18h cycles: 1119 read: 7559 GiB written: 8249 GiB Pre-Fail: retired block: 100 threshold: 3 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /media/ubuntu/96F0-C15D raw size: 29.81 GiB size: 29.80 GiB (99.95%) used: 50.2 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 96F0-C15D ID-2: /media/ubuntu/RPI4-SYSTEM raw size: 127.0 MiB size: 55.88 GiB (45059.82%) used: 32 KiB (0.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: RPI4-SYSTEM uuid: 51C3-D604 ID-3: /snap/chromium/1166 raw size: 143.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A ID-4: /snap/core18/1753 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A ID-5: /snap/gtk-common-themes/1506 raw size: 62.1 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A ID-6: /snap/snapd/7780 raw size: 26.3 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda2 size: 55.78 GiB fs: ext4 label: berryboot uuid: 03673bb8-37e1-496f-9d68-5f0ff020c1f0 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2813 Hub: 1-1.2.1:4 info: Genesys Logic USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0606 Device-1: 1-1.2.X.X:5 info: Microsoft type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:07b2 Hub: 1-1.2.X.X:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2537:1066 Hub: 2-2:3 info: VIA Labs ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0813 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 11.6% command: packagekitd pid: 1017 mem: 64.6 MiB (1.7%) 2: cpu: 11.5% command: gnome-shell pid: 1678 mem: 232.8 MiB (6.2%) 3: cpu: 10.8% command: snapd pid: 3083 mem: 36.7 MiB (0.9%) 4: cpu: 2.8% command: gnome-terminal-server pid: 4624 mem: 36.9 MiB (0.9%) 5: cpu: 2.7% command: gnome-software pid: 2064 mem: 131.1 MiB (3.5%) Memory top: 5 1: mem: 232.8 MiB (6.2%) command: gnome-shell pid: 1678 cpu: 11.5% 2: mem: 144.9 MiB (3.8%) command: tracker-miner-apps pid: 1906 cpu: 0.3% 3: mem: 142.8 MiB (3.8%) command: gnome-shell pid: 1483 cpu: 0.7% 4: mem: 131.1 MiB (3.5%) command: gnome-software pid: 2064 cpu: 2.7% 5: mem: 68.3 MiB (1.8%) command: gnome-documents started by: gjs-console pid: 4368 cpu: 2.0% Info: Processes: 246 Uptime: 15m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 64 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=03673bb8-37e1-496f-9d68-5f0ff020c1f0 qmap=de 
           Console: tty 0 wm: gnome-shell dm: GDM3 3.28.3 
           Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.79 GiB used: 1.66 GiB (43.8%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.6 compositor: gnome-shell driver: N/A 
           note: display driver n/a 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 85.71 GiB used: 50.3 MiB (0.1%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: NORELSYS 106X drive model: SV300S37A60G 
           family: Driven SSDs size: 55.90 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rev: BBF0 temp: 32 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 4y 4d 18h cycles: 1119 read: 7559 GiB 
           written: 8249 GiB Pre-Fail: retired block: 100 threshold: 3 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /media/ubuntu/96F0-C15D raw size: 29.81 GiB size: 29.80 GiB (99.95%) 
           used: 50.2 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A 
           uuid: 96F0-C15D 
           ID-2: /media/ubuntu/RPI4-SYSTEM raw size: 127.0 MiB size: 55.88 GiB (45059.82%) 
           used: 32 KiB (0.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: RPI4-SYSTEM 
           uuid: 51C3-D604 
           ID-3: /snap/chromium/1166 raw size: 143.4 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A 
           ID-4: /snap/core18/1753 raw size: 48.4 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A 
           ID-5: /snap/gtk-common-themes/1506 raw size: 62.1 MiB size: N/A (hidden?) 
           used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A 
           ID-6: /snap/snapd/7780 raw size: 26.3 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda2 size: 55.78 GiB fs: ext4 label: berryboot 
           uuid: 03673bb8-37e1-496f-9d68-5f0ff020c1f0 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2813 
           Hub: 1-1.2.1:4 info: Genesys Logic USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub ports: 4 
           rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0606 
           Device-1: 1-1.2.X.X:5 info: Microsoft type: Keyboard,Mouse,HID 
           driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:07b2 
           Hub: 1-1.2.X.X:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 2537:1066 Hub: 2-2:3 info: VIA Labs ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0813 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 11.6% command: packagekitd pid: 1017 mem: 64.6 MiB (1.7%) 
           2: cpu: 11.5% command: gnome-shell pid: 1678 mem: 232.8 MiB (6.2%) 
           3: cpu: 10.8% command: snapd pid: 3083 mem: 36.7 MiB (0.9%) 
           4: cpu: 2.8% command: gnome-terminal-server pid: 4624 mem: 36.9 MiB (0.9%) 
           5: cpu: 2.7% command: gnome-software pid: 2064 mem: 131.1 MiB (3.5%) 
           Memory top: 5 
           1: mem: 232.8 MiB (6.2%) command: gnome-shell pid: 1678 cpu: 11.5% 
           2: mem: 144.9 MiB (3.8%) command: tracker-miner-apps pid: 1906 cpu: 0.3% 
           3: mem: 142.8 MiB (3.8%) command: gnome-shell pid: 1483 cpu: 0.7% 
           4: mem: 131.1 MiB (3.5%) command: gnome-software pid: 2064 cpu: 2.7% 
           5: mem: 68.3 MiB (1.8%) command: gnome-documents started by: gjs-console pid: 4368 
           cpu: 2.0% 
Info:      Processes: 246 Uptime: 15m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.1.01

Benchmark #26819 - Brand: Kingston SSDNow V300