Benchmark #26836 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,700
931
#433 / 1,700
#417 / 989
#52 / 370
7,549
	Amazon.com AliExpress

Overview
2020-06-11 09:12:12
#26,836
3,603
-3,946 (-109.52%)
Anonymous
Transcend 32GB MTS400S, ELUTENG M2 SSD Case

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
SSD
JMicron
JMicronGeneric
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
44.3 MB/s
3,556 IOPS
3,042 IOPS
14,224 KB/s
12,168 KB/s
19,983 KB/s
16,679 KB/s
12,546 KB/s
18,075 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=54bf4737-d335-47f2-85f5-6242db4c566a qmap=de Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 427.0 MiB (11.0%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 202x70 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 58.70 GiB used: 50.3 MiB (0.1%) ID-1: /dev/mmcblk0 model: SD32G size: 28.89 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 29.82 GiB block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 28.88 GiB size: 28.87 GiB (99.95%) used: 50.3 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: EA60-F149 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda2 size: 29.69 GiB fs: ext4 label: berryboot uuid: 54bf4737-d335-47f2-85f5-6242db4c566a USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.9% command: lib/systemd/systemd pid: 1 mem: 8.06 MiB (0.2%) 2: cpu: 1.4% command: xorg pid: 550 mem: 47.2 MiB (1.2%) 3: cpu: 0.8% command: pi-greeter pid: 679 mem: 49.1 MiB (1.3%) 4: cpu: 0.7% command: [loop0] pid: 173 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: systemd-udevd pid: 231 mem: 3.98 MiB (0.1%) Memory top: 5 1: mem: 49.1 MiB (1.3%) command: pi-greeter pid: 679 cpu: 0.8% 2: mem: 47.2 MiB (1.2%) command: xorg pid: 550 cpu: 1.4% 3: mem: 13.2 MiB (0.3%) command: vncserver-x11-core pid: 395 cpu: 0.2% 4: mem: 12.5 MiB (0.3%) command: packagekitd pid: 1561 cpu: 0.1% 5: mem: 8.66 MiB (0.2%) command: udisksd pid: 325 cpu: 0.2% Info: Processes: 148 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=54bf4737-d335-47f2-85f5-6242db4c566a qmap=de 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 427.0 MiB (11.0%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 202x70 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 58.70 GiB used: 50.3 MiB (0.1%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.89 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 29.82 GiB 
           block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 28.88 GiB size: 28.87 GiB (99.95%) used: 50.3 MiB (0.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: EA60-F149 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 29.69 GiB fs: ext4 label: berryboot 
           uuid: 54bf4737-d335-47f2-85f5-6242db4c566a 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.9% command: lib/systemd/systemd pid: 1 mem: 8.06 MiB (0.2%) 
           2: cpu: 1.4% command: xorg pid: 550 mem: 47.2 MiB (1.2%) 
           3: cpu: 0.8% command: pi-greeter pid: 679 mem: 49.1 MiB (1.3%) 
           4: cpu: 0.7% command: [loop0] pid: 173 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: systemd-udevd pid: 231 mem: 3.98 MiB (0.1%) 
           Memory top: 5 
           1: mem: 49.1 MiB (1.3%) command: pi-greeter pid: 679 cpu: 0.8% 
           2: mem: 47.2 MiB (1.2%) command: xorg pid: 550 cpu: 1.4% 
           3: mem: 13.2 MiB (0.3%) command: vncserver-x11-core pid: 395 cpu: 0.2% 
           4: mem: 12.5 MiB (0.3%) command: packagekitd pid: 1561 cpu: 0.1% 
           5: mem: 8.66 MiB (0.2%) command: udisksd pid: 325 cpu: 0.2% 
Info:      Processes: 148 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26836 - Brand: Undentified JMicron USB to SATA Adapter