Benchmark #26927 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#61 / 1,700
317
#667 / 1,700
#642 / 989
#167 / 370
6,198
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-12 11:13:49
#26,927
2,190
-4,008 (-183.01%)
polda.t
12.06.2020

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
120G
SSD
Kingston
SV300S37A120G
SATA
2.10
480
1bcf:0c31
0x1bcf
0x0c31 (Telldus TellStick Duo)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.9 MB/s
34.1 MB/s
34.15 MB/s
2,540 IOPS
2,176 IOPS
10,163 KB/s
8,704 KB/s
9,256 KB/s
8,792 KB/s
8,438 KB/s
10,239 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7c735d68-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 199.1 MiB (9.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 111.79 GiB used: 3.16 GiB (2.8%) ID-1: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0200 drive rev: 507KC4 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 47d 11h cycles: 1369 read: 1437 GiB written: 970 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 3.11 GiB (2.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.2 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Sunplus Innovation SPIF30x Serial-ATA bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1bcf:0c31 Device-2: 1-1.3:4 info: Logitech M105 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 Device-3: 1-1.4:5 info: Chicony KU-9908 Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04f2:0111 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.5% command: [kworker/0:1+events_freezable] pid: 31 mem: 0.00 MiB (0.0%) 2: cpu: 0.4% command: init pid: 1 mem: 8.07 MiB (0.4%) 3: cpu: 0.4% command: packagekitd pid: 1066 mem: 13.1 MiB (0.6%) 4: cpu: 0.4% command: smartd pid: 1244 mem: 3.10 MiB (0.1%) 5: cpu: 0.3% command: [kworker/0:3-events] pid: 82 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 13.1 MiB (0.6%) command: packagekitd pid: 1066 cpu: 0.4% 2: mem: 10.7 MiB (0.5%) command: gvfs-udisks2-volume-monitor pid: 744 cpu: 0.0% 3: mem: 10.4 MiB (0.5%) command: udisksd pid: 747 cpu: 0.0% 4: mem: 8.47 MiB (0.4%) command: gvfsd-trash pid: 796 cpu: 0.0% 5: mem: 8.07 MiB (0.4%) command: init pid: 1 cpu: 0.4% Info: Processes: 135 Uptime: 20m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.02

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7c735d68-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 199.1 MiB (9.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 3.16 GiB (2.8%) 
           ID-1: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs 
           size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
           rev: 0200 drive rev: 507KC4 temp: 33 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 47d 11h cycles: 1369 read: 1437 GiB 
           written: 970 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 3.11 GiB (2.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.2 MiB (20.3%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Sunplus Innovation SPIF30x Serial-ATA bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1bcf:0c31 
           Device-2: 1-1.3:4 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 
           Device-3: 1-1.4:5 info: Chicony KU-9908 Keyboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04f2:0111 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.5% command: [kworker/0:1+events_freezable] pid: 31 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.4% command: init pid: 1 mem: 8.07 MiB (0.4%) 
           3: cpu: 0.4% command: packagekitd pid: 1066 mem: 13.1 MiB (0.6%) 
           4: cpu: 0.4% command: smartd pid: 1244 mem: 3.10 MiB (0.1%) 
           5: cpu: 0.3% command: [kworker/0:3-events] pid: 82 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 13.1 MiB (0.6%) command: packagekitd pid: 1066 cpu: 0.4% 
           2: mem: 10.7 MiB (0.5%) command: gvfs-udisks2-volume-monitor pid: 744 cpu: 0.0% 
           3: mem: 10.4 MiB (0.5%) command: udisksd pid: 747 cpu: 0.0% 
           4: mem: 8.47 MiB (0.4%) command: gvfsd-trash pid: 796 cpu: 0.0% 
           5: mem: 8.07 MiB (0.4%) command: init pid: 1 cpu: 0.4% 
Info:      Processes: 135 Uptime: 20m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.02

Benchmark #26927 - Brand: Kingston SSDNow V300