Benchmark #26936 - pibenchmarks.com

Brand: Seagate Barracuda FastSSD
SSD (Portable)
#813 / 1,679
6
#389 / 1,679
#376 / 984
#44 / 144
7,889
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-12 13:42:55
#26,936
4,142
-3,747 (-90.46%)
KM
Seagate BarraCuda FastSSD on Pi4

Storage Details
Seagate Barracuda FastSSD
SSD (Portable)
931.5G
SSD
Seagate
BarracudaFastSSD
3.00
5,000
0bc2:aa16
0x0bc2
0xaa16
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
54.6 MB/s
290.46 MB/s
268.85 MB/s
3,190 IOPS
3,232 IOPS
12,760 KB/s
12,931 KB/s
73,540 KB/s
57,715 KB/s
13,463 KB/s
12,900 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=c18f9991-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 363.3 MiB (9.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::4be2:2c72:fb4c:6142/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 84.24.X.X Drives: Local Storage: total: 1.02 TiB used: 9.87 GiB (0.9%) ID-1: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 600ABBF0 temp: 29 C scheme: MBR SMART: yes state: enabled health: PASSED on: 10d 0h cycles: 176 read: 304 GiB written: 256 GiB ID-2: /dev/sdb type: USB vendor: Seagate model: BarracudaFastSSD size: 931.51 GiB block size: physical: 512 B logical: 512 B rev: 0002 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 9.76 GiB (8.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 ID-3: /media/pi/Seagate raw size: 931.51 GiB size: 931.51 GiB (100.00%) used: 59.8 MiB (0.0%) fs: exfat block size: 4096 B dev: /dev/sdb1 label: Seagate uuid: B061-8101 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech G9x Laser Mouse type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c066 Hub: 1-1.4:4 info: Dell ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 413c:1010 Device-1: 1-1.4.4:5 info: Dell type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 413c:2110 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:4 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0bc2:aa16 Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.5% command: bash pid: 1968 mem: 2.86 MiB (0.0%) 2: cpu: 0.3% command: xorg pid: 559 mem: 48.0 MiB (1.2%) 3: cpu: 0.3% command: [kworker/0:0+events_freezable] pid: 1732 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: init pid: 1 mem: 7.95 MiB (0.2%) 5: cpu: 0.2% command: [kworker/0:1-events_power_efficient] pid: 31 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 48.0 MiB (1.2%) command: xorg pid: 559 cpu: 0.3% 2: mem: 42.0 MiB (1.0%) command: vncserver-x11-core pid: 497 cpu: 0.0% 3: mem: 28.7 MiB (0.7%) command: lxpanel pid: 671 cpu: 0.1% 4: mem: 26.2 MiB (0.6%) command: pcmanfm pid: 672 cpu: 0.1% 5: mem: 16.9 MiB (0.4%) command: vncserverui pid: 793 cpu: 0.0% Info: Processes: 152 Uptime: 22m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.02

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:3840x2160M@30 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
  vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=c18f9991-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.89 GiB used: 363.3 MiB (9.1%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting 
  unloaded: fbdev tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.118-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::4be2:2c72:fb4c:6142/64 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 84.24.X.X 
Drives:
  Local Storage: total: 1.02 TiB used: 9.87 GiB (0.9%) 
  ID-1: /dev/sda type: USB vendor: Kingston model: SV300S37A120G 
  family: Driven SSDs size: 111.79 GiB block size: physical: 512 B 
  logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
  rev: 600ABBF0 temp: 29 C scheme: MBR 
  SMART: yes state: enabled health: PASSED on: 10d 0h cycles: 176 
  read: 304 GiB written: 256 GiB 
  ID-2: /dev/sdb type: USB vendor: Seagate model: BarracudaFastSSD 
  size: 931.51 GiB block size: physical: 512 B logical: 512 B 
  rev: 0002 scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) 
  used: 9.76 GiB (8.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 
  label: boot uuid: A764-6923 
  ID-3: /media/pi/Seagate raw size: 931.51 GiB size: 931.51 GiB (100.00%) 
  used: 59.8 MiB (0.0%) fs: exfat block size: 4096 B dev: /dev/sdb1 
  label: Seagate uuid: B061-8101 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.3:3 info: Logitech G9x Laser Mouse type: Mouse,HID 
  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s 
  chip ID: 046d:c066 
  Hub: 1-1.4:4 info: Dell ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 413c:1010 
  Device-1: 1-1.4.4:5 info: Dell type: Keyboard,Mouse 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s 
  chip ID: 413c:2110 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-1:4 info: Seagate RSS LLC type: Mass Storage driver: uas 
  interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0bc2:aa16   Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E 
  SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
  type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
  chip ID: 174c:55aa 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 0.5% command: bash pid: 1968 mem: 2.86 MiB (0.0%) 
  2: cpu: 0.3% command: xorg pid: 559 mem: 48.0 MiB (1.2%) 
  3: cpu: 0.3% command: [kworker/0:0+events_freezable] pid: 1732 
  mem: 0.00 MiB (0.0%) 
  4: cpu: 0.2% command: init pid: 1 mem: 7.95 MiB (0.2%) 
  5: cpu: 0.2% command: [kworker/0:1-events_power_efficient] pid: 31 
  mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 48.0 MiB (1.2%) command: xorg pid: 559 cpu: 0.3% 
  2: mem: 42.0 MiB (1.0%) command: vncserver-x11-core pid: 497 cpu: 0.0% 
  3: mem: 28.7 MiB (0.7%) command: lxpanel pid: 671 cpu: 0.1% 
  4: mem: 26.2 MiB (0.6%) command: pcmanfm pid: 672 cpu: 0.1% 
  5: mem: 16.9 MiB (0.4%) command: vncserverui pid: 793 cpu: 0.0% 
Info:
  Processes: 152 Uptime: 22m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) inxi: 3.1.02

Benchmark #26936 - Brand: Seagate Barracuda FastSSD