Benchmark #26947 - pibenchmarks.com

Brand: Samsung 840
SSD (2.5" SATA)
#175 / 1,700
105
#820 / 1,700
#788 / 989
#250 / 370
5,397
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-12 19:33:17
#26,947
3,564
-1,833 (-51.43%)
Anonymous
Samsung 840 EVO on Pi 3B+ using StartTech SATA to USB adapter

Storage Details
Samsung 840
SSD (2.5" SATA)
120G
SSD
Samsung
SSD840Series
SATA
2.10
480
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
38.3 MB/s
36.62 MB/s
36.45 MB/s
4,416 IOPS
3,296 IOPS
17,666 KB/s
13,187 KB/s
20,553 KB/s
13,993 KB/s
12,453 KB/s
17,584 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 240.8 MiB (24.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 10.1.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.1.X.X IP v6: fe80::52ab:4a17:4c11:b585/64 scope: link WAN IP: 121.74.X.X Drives: Local Storage: total: 111.79 GiB used: 3.17 GiB (2.8%) ID-1: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: Samsung drive model: SSD 840 Series family: based SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s drive rev: 3202 drive rev: DXT0AB0Q temp: 25 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3y 51d 17h cycles: 2099 written: 6.23 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.42%) used: 3.12 GiB (2.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:4 info: Logitech MK260 Wireless Combo Receiver type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52e Device-3: 1-1.2:6 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 7.4% command: [kworker/1:2+events_freezable] pid: 80 mem: 0.00 MiB (0.0%) 2: cpu: 2.1% command: htop pid: 848 mem: 2.87 MiB (0.3%) 3: cpu: 1.2% command: [kworker/1:1-events] pid: 32 mem: 0.00 MiB (0.0%) 4: cpu: 1.1% command: init pid: 1 mem: 7.89 MiB (0.8%) 5: cpu: 1.1% command: xorg pid: 487 mem: 54.6 MiB (5.8%) Memory top: 5 1: mem: 54.6 MiB (5.8%) command: xorg pid: 487 cpu: 1.1% 2: mem: 49.3 MiB (5.3%) command: lxterminal pid: 824 cpu: 1.1% 3: mem: 28.1 MiB (3.0%) command: lxpanel pid: 595 cpu: 0.6% 4: mem: 21.2 MiB (2.2%) command: pcmanfm pid: 597 cpu: 0.3% 5: mem: 14.7 MiB (1.5%) command: openbox pid: 591 cpu: 0.2% Info: Processes: 145 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.02

inxi Results

System:    Host: raspberrypi Kernel: 4.19.118-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 
Memory:    RAM: total: 1002.1 MiB used: 240.8 MiB (24.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 
           IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 10.1.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.1.X.X 
           IP v6: fe80::52ab:4a17:4c11:b585/64 scope: link 
           WAN IP: 121.74.X.X 
Drives:    Local Storage: total: 111.79 GiB used: 3.17 GiB (2.8%) 
           ID-1: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: Samsung drive model: SSD 840 Series 
           family: based SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           drive rev: 3202 drive rev: DXT0AB0Q temp: 25 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3y 51d 17h cycles: 2099 written: 6.23 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.77 GiB (98.42%) used: 3.12 GiB (2.8%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:4 info: Logitech MK260 Wireless Combo Receiver type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52e 
           Device-3: 1-1.2:6 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 7.4% command: [kworker/1:2+events_freezable] pid: 80 mem: 0.00 MiB (0.0%) 
           2: cpu: 2.1% command: htop pid: 848 mem: 2.87 MiB (0.3%) 
           3: cpu: 1.2% command: [kworker/1:1-events] pid: 32 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.1% command: init pid: 1 mem: 7.89 MiB (0.8%) 
           5: cpu: 1.1% command: xorg pid: 487 mem: 54.6 MiB (5.8%) 
           Memory top: 5 
           1: mem: 54.6 MiB (5.8%) command: xorg pid: 487 cpu: 1.1% 
           2: mem: 49.3 MiB (5.3%) command: lxterminal pid: 824 cpu: 1.1% 
           3: mem: 28.1 MiB (3.0%) command: lxpanel pid: 595 cpu: 0.6% 
           4: mem: 21.2 MiB (2.2%) command: pcmanfm pid: 597 cpu: 0.3% 
           5: mem: 14.7 MiB (1.5%) command: openbox pid: 591 cpu: 0.2% 
Info:      Processes: 145 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.02

Benchmark #26947 - Brand: Samsung 840