Benchmark #26986 - pibenchmarks.com

Brand: SanDisk U110 mSATA
SSD (mSATA)
#352 / 1,672
31
#1,022 / 1,672
#922 / 983
#59 / 69
2,781
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se Amazon.sg

Overview
2020-06-13 09:16:19
#26,986
6,398
+3,617 (+56.53%)
BigBadEddie
SanDisk SDSA6MM-016G-1006 2042 16Gb M.2 SSD on a Pi 4 using an Ebay NGFF SATA to USB 3.1 adapter

Storage Details
SanDisk U110 mSATA
SSD (mSATA)
16G
SSD
SanDisk
SDSA6MM-016G-1006
1.8 inch
SATA
3.00
5,000
152d:0576
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0576
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
24.2 MB/s
297.33 MB/s
247.28 MB/s
1,774 IOPS
13,884 IOPS
7,099 KB/s
55,538 KB/s
69,480 KB/s
21,080 KB/s
72,332 KB/s
16,212 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=34527c0b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 225.9 MiB (5.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 152x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::72e7:dcdd:c6b:294a/64 scope: link WAN IP: 51.9.X.X Drives: Local Storage: total: 22.36 GiB used: 5.80 GiB (25.9%) ID-1: /dev/mmcblk0 model: SD16G size: 7.45 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 14.91 GiB block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.19 GiB size: 7.02 GiB (97.55%) used: 5.70 GiB (81.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: A764-6923 ID-3: /mnt/usbdrive raw size: 14.91 GiB size: 14.91 GiB (100.00%) used: 44.3 MiB (0.3%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: New Volume uuid: BCD89FCBD89F8276 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 127 1: cpu: 0.5% command: [kworker/0:1h-kblockd] pid: 85 mem: 0.00 MiB (0.0%) 2: cpu: 0.4% command: packagekitd pid: 2905 mem: 13.0 MiB (0.3%) 3: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 2757 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: bash pid: 2764 mem: 2.86 MiB (0.0%) 5: cpu: 0.2% command: init pid: 1 mem: 8.09 MiB (0.2%) Memory top: 5 of 127 1: mem: 13.0 MiB (0.3%) command: packagekitd pid: 2905 cpu: 0.4% 2: mem: 10.1 MiB (0.2%) command: udisksd pid: 361 cpu: 0.0% 3: mem: 8.09 MiB (0.2%) command: init pid: 1 cpu: 0.2% 4: mem: 7.12 MiB (0.1%) command: systemd-journald pid: 129 cpu: 0.0% 5: mem: 7.00 MiB (0.1%) command: polkitd pid: 522 cpu: 0.0% Info: Processes: 127 Uptime: 37m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=34527c0b-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.89 GiB used: 225.9 MiB (5.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 152x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::72e7:dcdd:c6b:294a/64 scope: link 
           WAN IP: 51.9.X.X 
Drives:    Local Storage: total: 22.36 GiB used: 5.80 GiB (25.9%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 7.45 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 14.91 GiB block size: physical: 4096 B 
           logical: 512 B rev: 1507 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.19 GiB size: 7.02 GiB (97.55%) used: 5.70 GiB (81.3%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.9 MiB (20.2%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: A764-6923 
           ID-3: /mnt/usbdrive raw size: 14.91 GiB size: 14.91 GiB (100.00%) used: 44.3 MiB (0.3%) fs: ntfs block size: 4096 B 
           dev: /dev/sda1 label: New Volume uuid: BCD89FCBD89F8276 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 152d:0576 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 127 
           1: cpu: 0.5% command: [kworker/0:1h-kblockd] pid: 85 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.4% command: packagekitd pid: 2905 mem: 13.0 MiB (0.3%) 
           3: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 2757 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: bash pid: 2764 mem: 2.86 MiB (0.0%) 
           5: cpu: 0.2% command: init pid: 1 mem: 8.09 MiB (0.2%) 
           Memory top: 5 of 127 
           1: mem: 13.0 MiB (0.3%) command: packagekitd pid: 2905 cpu: 0.4% 
           2: mem: 10.1 MiB (0.2%) command: udisksd pid: 361 cpu: 0.0% 
           3: mem: 8.09 MiB (0.2%) command: init pid: 1 cpu: 0.2% 
           4: mem: 7.12 MiB (0.1%) command: systemd-journald pid: 129 cpu: 0.0% 
           5: mem: 7.00 MiB (0.1%) command: polkitd pid: 522 cpu: 0.0% 
Info:      Processes: 127 Uptime: 37m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.1.03

Benchmark #26986 - Brand: SanDisk U110 mSATA