Benchmark #27019 - pibenchmarks.com

Brand: SanDisk SD Extreme (SU08G)
C2
#222 / 1,679
75
#1,582 / 1,679
#370 / 394
470
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-13 18:30:03
#27,019
415
-55 (-13.25%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme (SU08G)
C2
7.1G
SD
SanDisk
SU08G
SDHC
2.00
0x03
SD
8.0
02/2009
Class 2
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
7.9 MB/s
21.73 MB/s
21.62 MB/s
8 IOPS
1,485 IOPS
33 KB/s
5,940 KB/s
5,478 KB/s
1,430 KB/s
5,305 KB/s
19 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 699.4 MiB (17.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") s-diag: 338mm (13.3") Monitor-1: HDMI-1 res: 1024x768 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 2.74 TiB used: 2.19 TiB (79.9%) ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A1 drive model: WD30NMZW-11GX6S1 family: Elements / My Passport (USB, AF) size: 2.73 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm rev: 1014 drive rev: 01.01A01 temp: 28 C scheme: GPT SMART: yes state: enabled health: PASSED on: 217d 1h cycles: 394 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.05 GiB size: 6.82 GiB (96.66%) used: 4.59 GiB (67.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: e9493b2c-16b1-45e2-8a76-075c1fa7f1fb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: CF2D-AAAC ID-3: /media/USBHDD2 raw size: 2.73 TiB size: 2.73 TiB (100.00%) used: 2.18 TiB (80.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: WD uuid: 482A13BC2A13A5CA Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 96.5 MiB (96.5%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0058-ADA5 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 628d36a0-f4de-421b-9ddd-338cfa9e468d USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Western Digital Elements / My Passport (WD20NMVW) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:25a1 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //archive.raspbian.org/raspbian stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: sickbeard.py started by: python pid: 15888 mem: 163.2 MiB (4.1%) 2: cpu: 1.3% command: sabnzbdplus started by: python2 pid: 951 mem: 178.9 MiB (4.5%) 3: cpu: 1.0% command: lxpanel pid: 752 mem: 44.4 MiB (1.1%) 4: cpu: 1.0% command: [kworker/u8:3-events_unbound] pid: 19571 mem: 0.00 MiB (0.0%) 5: cpu: 0.8% command: sda1 started by: mount.ntfs pid: 270 mem: 4.67 MiB (0.1%) Memory top: 5 1: mem: 178.9 MiB (4.5%) command: sabnzbdplus started by: python2 pid: 951 cpu: 1.3% 2: mem: 163.2 MiB (4.1%) command: sickbeard.py started by: python pid: 15888 cpu: 1.7% 3: mem: 44.4 MiB (1.1%) command: lxpanel pid: 752 cpu: 1.0% 4: mem: 26.1 MiB (0.6%) command: xorg pid: 508 cpu: 0.2% 5: mem: 19.2 MiB (0.4%) command: pcmanfm pid: 755 cpu: 0.1% Info: Processes: 181 Uptime: 4d 11h 13m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet 
           splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 699.4 MiB (17.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
           s-diag: 338mm (13.3") 
           Monitor-1: HDMI-1 res: 1024x768 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 2.74 TiB used: 2.19 TiB (79.9%) 
           ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A1 
           drive model: WD30NMZW-11GX6S1 family: Elements / My Passport (USB, AF) size: 2.73 TiB 
           block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rotation: 5400 rpm rev: 1014 
           drive rev: 01.01A01 temp: 28 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 217d 1h cycles: 394 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.05 GiB size: 6.82 GiB (96.66%) used: 4.59 GiB (67.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: e9493b2c-16b1-45e2-8a76-075c1fa7f1fb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: CF2D-AAAC 
           ID-3: /media/USBHDD2 raw size: 2.73 TiB size: 2.73 TiB (100.00%) used: 2.18 TiB (80.0%) 
           fs: ntfs block size: 4096 B dev: /dev/sda1 label: WD uuid: 482A13BC2A13A5CA 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 96.5 MiB (96.5%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0058-ADA5 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 628d36a0-f4de-421b-9ddd-338cfa9e468d 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Western Digital Elements / My Passport (WD20NMVW) 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 1058:25a1 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //archive.raspbian.org/raspbian stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: sickbeard.py started by: python pid: 15888 mem: 163.2 MiB (4.1%) 
           2: cpu: 1.3% command: sabnzbdplus started by: python2 pid: 951 mem: 178.9 MiB (4.5%) 
           3: cpu: 1.0% command: lxpanel pid: 752 mem: 44.4 MiB (1.1%) 
           4: cpu: 1.0% command: [kworker/u8:3-events_unbound] pid: 19571 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.8% command: sda1 started by: mount.ntfs pid: 270 mem: 4.67 MiB (0.1%) 
           Memory top: 5 
           1: mem: 178.9 MiB (4.5%) command: sabnzbdplus started by: python2 pid: 951 cpu: 1.3% 
           2: mem: 163.2 MiB (4.1%) command: sickbeard.py started by: python pid: 15888 cpu: 1.7% 
           3: mem: 44.4 MiB (1.1%) command: lxpanel pid: 752 cpu: 1.0% 
           4: mem: 26.1 MiB (0.6%) command: xorg pid: 508 cpu: 0.2% 
           5: mem: 19.2 MiB (0.4%) command: pcmanfm pid: 755 cpu: 0.1% 
Info:      Processes: 181 Uptime: 4d 11h 13m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.01

Benchmark #27019 - Brand: SanDisk SD Extreme (SU08G)