Benchmark #27207 - pibenchmarks.com

Brand: Samsung SD EVO+ (GB1QT)
C10 U1
#57 / 1,539
178
#1,252 / 1,539
#226 / 369
1,033
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-16 09:51:43
#27,207
870
-163 (-18.74%)
Anonymous
testing

Secure Digital (SD) Card Details
Samsung SD EVO+ (GB1QT)
C10 U1
29.8G
SD
Samsung
GB1QT
SDHC
3.00
0x1b
SM
3.0
01/2018
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
16.3 MB/s
21.03 MB/s
17.95 MB/s
276 IOPS
2,339 IOPS
1,105 KB/s
9,358 KB/s
7,432 KB/s
3,398 KB/s
7,313 KB/s
1,849 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=fe99997f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 Console: tty 0 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.5 MiB used: 233.9 MiB (23.3%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: N/A note: display driver n/a tty: 198x30 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute dynamic scope: global IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 327.90 GiB used: 150.02 GiB (45.8%) ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 298.09 GiB block size: physical: 512 B logical: 512 B rev: 0508 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.77 GiB size: 29.24 GiB (98.23%) used: 13.75 GiB (47.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 31688870-9e02-4182-8cda-25195c5a4739 ID-2: /boot raw size: 43.1 MiB size: 42.4 MiB (98.43%) used: 22.3 MiB (52.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: D332-A79C ID-3: /home//backup_copy raw size: 298.09 GiB size: 298.09 GiB (100.00%) used: 136.25 GiB (45.7%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: Back1 uuid: 7A2C98CF2C988831 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 1024.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.3:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 of 141 1: cpu: 1.2% command: -bash pid: 12063 mem: 4.29 MiB (0.4%) 2: cpu: 0.4% command: sshd: pid: 12051 mem: 5.64 MiB (0.6%) 3: cpu: 0.3% command: bash pid: 12091 mem: 2.58 MiB (0.2%) 4: cpu: 0.2% command: pihole-ftl pid: 613 mem: 7.00 MiB (0.8%) 5: cpu: 0.2% command: php-cgi pid: 637 mem: 11.9 MiB (1.3%) Memory top: 5 of 141 1: mem: 32.1 MiB (3.6%) command: php-fpm: pid: 538 cpu: 0.0% 2: mem: 30.9 MiB (3.5%) command: php-cgi pid: 634 cpu: 0.0% 3: mem: 15.0 MiB (1.7%) command: smbd pid: 776 cpu: 0.0% 4: mem: 14.3 MiB (1.6%) command: smbd pid: 8314 cpu: 0.0% 5: mem: 13.9 MiB (1.5%) command: smbd pid: 790 cpu: 0.0% Info: Processes: 141 Uptime: 1h 02m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=fe99997f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 
           Console: tty 0 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.5 MiB used: 233.9 MiB (23.3%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: N/A note: display driver n/a tty: 198x30 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 327.90 GiB used: 150.02 GiB (45.8%) 
           ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 298.09 GiB 
           block size: physical: 512 B logical: 512 B rev: 0508 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.77 GiB size: 29.24 GiB (98.23%) used: 13.75 GiB (47.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 31688870-9e02-4182-8cda-25195c5a4739 
           ID-2: /boot raw size: 43.1 MiB size: 42.4 MiB (98.43%) used: 22.3 MiB (52.6%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: D332-A79C 
           ID-3: /home//backup_copy raw size: 298.09 GiB size: 298.09 GiB (100.00%) 
           used: 136.25 GiB (45.7%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: Back1 
           uuid: 7A2C98CF2C988831 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 1024.0 MiB used: 0 KiB (0.0%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.3:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian stretch edge
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 of 141 
           1: cpu: 1.2% command: -bash pid: 12063 mem: 4.29 MiB (0.4%) 
           2: cpu: 0.4% command: sshd: pid: 12051 mem: 5.64 MiB (0.6%) 
           3: cpu: 0.3% command: bash pid: 12091 mem: 2.58 MiB (0.2%) 
           4: cpu: 0.2% command: pihole-ftl pid: 613 mem: 7.00 MiB (0.8%) 
           5: cpu: 0.2% command: php-cgi pid: 637 mem: 11.9 MiB (1.3%) 
           Memory top: 5 of 141 
           1: mem: 32.1 MiB (3.6%) command: php-fpm: pid: 538 cpu: 0.0% 
           2: mem: 30.9 MiB (3.5%) command: php-cgi pid: 634 cpu: 0.0% 
           3: mem: 15.0 MiB (1.7%) command: smbd pid: 776 cpu: 0.0% 
           4: mem: 14.3 MiB (1.6%) command: smbd pid: 8314 cpu: 0.0% 
           5: mem: 13.9 MiB (1.5%) command: smbd pid: 790 cpu: 0.0% 
Info:      Processes: 141 Uptime: 1h 02m Init: systemd v: 232 runlevel: 3 
           target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper 
           v: 4.4.12-release inxi: 3.1.03

Benchmark #27207 - Brand: Samsung SD EVO+ (GB1QT)