Benchmark #27213 - pibenchmarks.com

Brand: Emtec X150
SSD (2.5" SATA)
#422 / 1,679
26
#481 / 1,679
#464 / 984
#70 / 370
7,142
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-16 11:21:51
#27,213
8,145
+1,003 (+12.31%)
Anonymous

Storage Details
Emtec X150
SSD (2.5" SATA)
120G
SSD
Emtec
X150120GB
SATA
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
203 MB/s
214.55 MB/s
194.97 MB/s
12,603 IOPS
21,157 IOPS
50,412 KB/s
84,628 KB/s
32,325 KB/s
21,881 KB/s
20,513 KB/s
25,978 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 584.9 MiB (29.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 264x64 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 1.02 TiB used: 424.67 GiB (40.7%) ID-1: /dev/sda type: USB vendor: Emtec model: X150 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: V4.7 temp: 48 C scheme: MBR SMART: yes state: enabled health: PASSED on: 110d 18h cycles: 143 read: 53 KiB written: 426 KiB ID-2: /dev/sdb type: USB vendor: Western Digital model: WD10 EZRX-00A8LB0 drive model: WD10EZRX-00A8LB0 family: Green size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 01.01A01 temp: 34 C scheme: GPT SMART: yes state: enabled health: PASSED on: 2y 5d 2h cycles: 3730 Old-Age: UDMA CRC errors: 6949 alert: Bad cable/connection? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 8.22 GiB (7.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.4 MiB (20.4%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/1To_USB raw size: 931.51 GiB size: 915.89 GiB (98.32%) used: 416.40 GiB (45.5%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: f8888c2a-a21f-4800-8183-bf307647d927 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/100-ubnt-unifi.list 1: deb https: //www.ui.com/downloads/unifi/debian stable ubiquiti Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/pms.list 1: deb https: //dev2day.de/pms/ jessie main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https: //ookla.bintray.com/debian buster main Active apt repos in: /etc/apt/sources.list.d/zabbix.list 1: deb http: //repo.zabbix.com/zabbix/5.0/raspbian buster main 2: deb-src http: //repo.zabbix.com/zabbix/5.0/raspbian buster main Processes: CPU top: 5 of 151 1: cpu: 64.3% command: influxd pid: 499 mem: 215.2 MiB (11.1%) 2: cpu: 38.4% command: chronograf pid: 473 mem: 27.7 MiB (1.4%) 3: cpu: 15.9% command: plex pid: 765 mem: 30.4 MiB (1.5%) 4: cpu: 12.6% command: plex pid: 1175 mem: 28.5 MiB (1.4%) 5: cpu: 5.3% command: init pid: 1 mem: 7.86 MiB (0.4%) Memory top: 5 of 151 1: mem: 215.2 MiB (11.1%) command: influxd pid: 499 cpu: 64.3% 2: mem: 94.0 MiB (4.8%) command: mysqld pid: 718 cpu: 1.8% 3: mem: 45.9 MiB (2.3%) command: plex pid: 564 cpu: 4.3% 4: mem: 38.8 MiB (2.0%) command: telegraf pid: 543 cpu: 1.2% 5: mem: 30.4 MiB (1.5%) command: plex pid: 765 cpu: 15.9% Info: Processes: 151 Uptime: 1m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 584.9 MiB (29.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 264x64 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 1.02 TiB used: 424.67 GiB (40.7%) 
           ID-1: /dev/sda type: USB vendor: Emtec model: X150 120GB size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: V4.7 
           temp: 48 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 110d 18h cycles: 143 read: 53 KiB 
           written: 426 KiB 
           ID-2: /dev/sdb type: USB vendor: Western Digital model: WD10 EZRX-00A8LB0 
           drive model: WD10EZRX-00A8LB0 family: Green size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 01.01A01 temp: 34 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 2y 5d 2h cycles: 3730 Old-Age: 
           UDMA CRC errors: 6949 alert: Bad cable/connection? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 8.22 GiB (7.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.4 MiB (20.4%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/1To_USB raw size: 931.51 GiB size: 915.89 GiB (98.32%) 
           used: 416.40 GiB (45.5%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: f8888c2a-a21f-4800-8183-bf307647d927 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/100-ubnt-unifi.list 
           1: deb https: //www.ui.com/downloads/unifi/debian stable ubiquiti
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/pms.list 
           1: deb https: //dev2day.de/pms/ jessie main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https: //ookla.bintray.com/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/zabbix.list 
           1: deb http: //repo.zabbix.com/zabbix/5.0/raspbian buster main
           2: deb-src http: //repo.zabbix.com/zabbix/5.0/raspbian buster main
Processes: CPU top: 5 of 151 
           1: cpu: 64.3% command: influxd pid: 499 mem: 215.2 MiB (11.1%) 
           2: cpu: 38.4% command: chronograf pid: 473 mem: 27.7 MiB (1.4%) 
           3: cpu: 15.9% command: plex pid: 765 mem: 30.4 MiB (1.5%) 
           4: cpu: 12.6% command: plex pid: 1175 mem: 28.5 MiB (1.4%) 
           5: cpu: 5.3% command: init pid: 1 mem: 7.86 MiB (0.4%) 
           Memory top: 5 of 151 
           1: mem: 215.2 MiB (11.1%) command: influxd pid: 499 cpu: 64.3% 
           2: mem: 94.0 MiB (4.8%) command: mysqld pid: 718 cpu: 1.8% 
           3: mem: 45.9 MiB (2.3%) command: plex pid: 564 cpu: 4.3% 
           4: mem: 38.8 MiB (2.0%) command: telegraf pid: 543 cpu: 1.2% 
           5: mem: 30.4 MiB (1.5%) command: plex pid: 765 cpu: 15.9% 
Info:      Processes: 151 Uptime: 1m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27213 - Brand: Emtec X150