Benchmark #27248 - pibenchmarks.com

Brand: Lexar SD OEM (USD00)
C10 U1
#140 / 1,700
131
#1,459 / 1,700
#287 / 404
926
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-16 19:43:20
#27,248
1,084
+158 (+14.58%)
Anonymous
4B sd 100mhz

Secure Digital (SD) Card Details
Lexar SD OEM (USD00)
C10 U1
29.3G
SD
Lexar
USD00
SD
6.00
0x9c
SO
1.0
01/2020
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
17.9 MB/s
17.01 MB/s
18.69 MB/s
865 IOPS
2,504 IOPS
3,460 KB/s
10,018 KB/s
8,861 KB/s
3,422 KB/s
7,685 KB/s
2,938 KB/s

inxi Results
System: Kernel: 5.4.45-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1aa56990-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait nosplash ip=192.168.X.X::192.168.X.X:255.255.X.X:rpi:eth0:off ipv6.disable=0 Console: tty 0 DM: LightDM 1.26.0 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Memory: RAM: total: 7.71 GiB used: 302.1 MiB (3.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 130x31 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.45-v8+ Network: Device-1: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.2:3 chip ID: 148f:5370 IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v4: type: secondary dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 29.54 GiB used: 8.37 GiB (28.3%) ID-1: /dev/mmcblk0 model: USD00 size: 29.54 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.29 GiB size: 28.77 GiB (98.23%) used: 8.32 GiB (28.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 56.4 MiB (22.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F8C9-55AB Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:5370 Device-2: 1-1.3:4 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 159 1: cpu: 1.7% command: init pid: 1 mem: 9.13 MiB (0.1%) 2: cpu: 0.7% command: xorg pid: 729 mem: 78.8 MiB (1.0%) 3: cpu: 0.5% command: lxpanel pid: 1142 mem: 32.1 MiB (0.4%) 4: cpu: 0.3% command: systemd-journald pid: 130 mem: 14.1 MiB (0.1%) 5: cpu: 0.3% command: bash pid: 1345 mem: 3.16 MiB (0.0%) Memory top: 5 of 159 1: mem: 78.8 MiB (1.0%) command: xorg pid: 729 cpu: 0.7% 2: mem: 36.8 MiB (0.4%) command: pcmanfm pid: 1146 cpu: 0.2% 3: mem: 32.1 MiB (0.4%) command: lxpanel pid: 1142 cpu: 0.5% 4: mem: 16.1 MiB (0.2%) command: openbox pid: 1129 cpu: 0.0% 5: mem: 14.2 MiB (0.1%) command: packagekitd pid: 1729 cpu: 0.3% Info: Processes: 159 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 5.4.45-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1aa56990-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait nosplash 
           ip=192.168.X.X::192.168.X.X:255.255.X.X:rpi:eth0:off ipv6.disable=0 
           Console: tty 0 DM: LightDM 1.26.0 Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Memory:    RAM: total: 7.71 GiB used: 302.1 MiB (3.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 130x31 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.45-v8+ 
Network:   Device-1: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.2:3 
           chip ID: 148f:5370 IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  type: secondary dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.54 GiB used: 8.37 GiB (28.3%) 
           ID-1: /dev/mmcblk0 model: USD00 size: 29.54 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.29 GiB size: 28.77 GiB (98.23%) used: 8.32 GiB (28.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 56.4 MiB (22.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F8C9-55AB 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:5370 Device-2: 1-1.3:4 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 159 
           1: cpu: 1.7% command: init pid: 1 mem: 9.13 MiB (0.1%) 
           2: cpu: 0.7% command: xorg pid: 729 mem: 78.8 MiB (1.0%) 
           3: cpu: 0.5% command: lxpanel pid: 1142 mem: 32.1 MiB (0.4%) 
           4: cpu: 0.3% command: systemd-journald pid: 130 mem: 14.1 MiB (0.1%) 
           5: cpu: 0.3% command: bash pid: 1345 mem: 3.16 MiB (0.0%) 
           Memory top: 5 of 159 
           1: mem: 78.8 MiB (1.0%) command: xorg pid: 729 cpu: 0.7% 
           2: mem: 36.8 MiB (0.4%) command: pcmanfm pid: 1146 cpu: 0.2% 
           3: mem: 32.1 MiB (0.4%) command: lxpanel pid: 1142 cpu: 0.5% 
           4: mem: 16.1 MiB (0.2%) command: openbox pid: 1129 cpu: 0.0% 
           5: mem: 14.2 MiB (0.1%) command: packagekitd pid: 1729 cpu: 0.3% 
Info:      Processes: 159 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27248 - Brand: Lexar SD OEM (USD00)