Benchmark #27288 - pibenchmarks.com

Brand: Integral UltimaPro X SSD
SSD (2.5" SATA)
#1,044 / 1,679
3
#321 / 1,679
#312 / 984
#23 / 370
8,861
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-06-17 14:51:45
#27,288
8,999
+138 (+1.53%)
Anonymous
eultang usb to sata with integral ssd

Storage Details
Integral UltimaPro X SSD
SSD (2.5" SATA)
240G
SSD
Integral
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
2,000 (+500)
700 (+200)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
205 MB/s
290.18 MB/s
287.52 MB/s
10,963 IOPS
29,132 IOPS
43,854 KB/s
116,529 KB/s
30,781 KB/s
30,900 KB/s
21,186 KB/s
31,748 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Memory: RAM: total: 7.86 GiB used: 567.3 MiB (7.1%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 959 Speed: 1333 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 1333 2: 1333 3: 1333 4: 1333 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Drives: Local Storage: total: 253.29 GiB used: 19.42 GiB (7.7%) ID-1: /dev/mmcblk0 model: WP32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Integral Memory model: N/A size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: SCFM12.2 temp: 27 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 18 written: 72 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.57 GiB size: 219.56 GiB (98.21%) used: 19.37 GiB (8.8%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: f9fd8d8e-65af-4845-9e2f-b57d8b1efa57 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: CD28-6C97 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 26992cbf-74a1-4b6d-84eb-802b70f9fd9c USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0409:005a Hub: 1-1.4.4:4 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0409:005a Device-1: 1-1.4.X.X:5 info: Sunplus Innovation Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 1bcf:0005 Device-2: 1-1.4.X.X:6 info: Elan Micro ActiveJet K-2024 Multimedia Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f3:0103 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster rpi non-free contrib main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 177 1: cpu: 10.7% command: init pid: 1 mem: 7.89 MiB (0.1%) 2: cpu: 10.7% command: xorg pid: 586 mem: 50.1 MiB (0.6%) 3: cpu: 4.6% command: applet.py started by: python3 pid: 817 mem: 27.2 MiB (0.3%) 4: cpu: 4.1% command: xfdesktop pid: 797 mem: 34.6 MiB (0.4%) 5: cpu: 3.8% command: [kworker/0:1-events_power_efficient] pid: 31 mem: 0.00 MiB (0.0%) Memory top: 5 of 177 1: mem: 50.1 MiB (0.6%) command: xorg pid: 586 cpu: 10.7% 2: mem: 35.4 MiB (0.4%) command: xfce4-terminal pid: 1194 cpu: 3.7% 3: mem: 34.6 MiB (0.4%) command: xfdesktop pid: 797 cpu: 4.1% 4: mem: 30.0 MiB (0.3%) command: nm-applet pid: 820 cpu: 2.6% 5: mem: 29.7 MiB (0.3%) command: libthunar-tpa.so started by: wrapper-2.0 pid: 905 cpu: 2.0% Info: Processes: 177 Uptime: N/A Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyAMA0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Memory:    RAM: total: 7.86 GiB used: 567.3 MiB (7.1%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 959 
           Speed: 1333 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 1333 2: 1333 3: 1333 
           4: 1333 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev display ID: :0.0 
           screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") 
           diag: 686mm (27") 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           WAN IP:  
Drives:    Local Storage: total: 253.29 GiB used: 19.42 GiB (7.7%) 
           ID-1: /dev/mmcblk0 model: WP32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Integral Memory model: N/A size: 223.57 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: SCFM12.2 temp: 27 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 18 written: 72 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.57 GiB size: 219.56 GiB (98.21%) used: 19.37 GiB (8.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: f9fd8d8e-65af-4845-9e2f-b57d8b1efa57 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.3%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: CD28-6C97 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 26992cbf-74a1-4b6d-84eb-802b70f9fd9c 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0409:005a 
           Hub: 1-1.4.4:4 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0409:005a 
           Device-1: 1-1.4.X.X:5 info: Sunplus Innovation Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 1bcf:0005 
           Device-2: 1-1.4.X.X:6 info: Elan Micro ActiveJet K-2024 Multimedia Keyboard 
           type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s 
           chip ID: 04f3:0103 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster rpi non-free contrib main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 177 
           1: cpu: 10.7% command: init pid: 1 mem: 7.89 MiB (0.1%) 
           2: cpu: 10.7% command: xorg pid: 586 mem: 50.1 MiB (0.6%) 
           3: cpu: 4.6% command: applet.py started by: python3 pid: 817 mem: 27.2 MiB (0.3%) 
           4: cpu: 4.1% command: xfdesktop pid: 797 mem: 34.6 MiB (0.4%) 
           5: cpu: 3.8% command: [kworker/0:1-events_power_efficient] pid: 31 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 177 
           1: mem: 50.1 MiB (0.6%) command: xorg pid: 586 cpu: 10.7% 
           2: mem: 35.4 MiB (0.4%) command: xfce4-terminal pid: 1194 cpu: 3.7% 
           3: mem: 34.6 MiB (0.4%) command: xfdesktop pid: 797 cpu: 4.1% 
           4: mem: 30.0 MiB (0.3%) command: nm-applet pid: 820 cpu: 2.6% 
           5: mem: 29.7 MiB (0.3%) command: libthunar-tpa.so started by: wrapper-2.0 pid: 905 
           cpu: 2.0% 
Info:      Processes: 177 Uptime: N/A Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.1.03