Benchmark #27335 - pibenchmarks.com

Brand: Emtec X150
SSD (2.5" SATA)
#387 / 1,672
26
#474 / 1,672
#458 / 983
#69 / 370
7,142
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-18 05:44:38
#27,335
7,826
+684 (+8.74%)
Anonymous

Storage Details
Emtec X150
SSD (2.5" SATA)
120G
SSD
Emtec
X150120GB
SATA
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
192 MB/s
203.13 MB/s
208.3 MB/s
11,858 IOPS
22,068 IOPS
47,434 KB/s
88,275 KB/s
31,917 KB/s
22,602 KB/s
20,351 KB/s
24,322 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 287.0 MiB (14.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 132x64 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 1.02 TiB used: 420.31 GiB (40.3%) ID-1: /dev/sda type: USB vendor: Emtec model: X150 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: V4.7 temp: 48 C scheme: MBR SMART: yes state: enabled health: PASSED on: 112d 6h cycles: 174 read: 57 KiB written: 429 KiB ID-2: /dev/sdb type: USB vendor: Western Digital model: WD10 EZRX-00A8LB0 drive model: WD10EZRX-00A8LB0 family: Green size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 01.01A01 temp: 28 C scheme: GPT SMART: yes state: enabled health: PASSED on: 2y 6d 19h cycles: 3734 Old-Age: UDMA CRC errors: 6949 alert: Bad cable/connection? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 3.86 GiB (3.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/1To_USB raw size: 931.51 GiB size: 915.89 GiB (98.32%) used: 416.40 GiB (45.5%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: f8888c2a-a21f-4800-8183-bf307647d927 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https: //ookla.bintray.com/debian buster main Processes: CPU top: 5 of 156 1: cpu: 1.1% command: smartd pid: 1260 mem: 3.19 MiB (0.1%) 2: cpu: 0.5% command: [kworker/0:1-events] pid: 18501 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: packagekitd pid: 1083 mem: 12.7 MiB (0.6%) 4: cpu: 0.2% command: plex pid: 488 mem: 54.0 MiB (2.7%) 5: cpu: 0.2% command: bash pid: 837 mem: 2.78 MiB (0.1%) Memory top: 5 of 156 1: mem: 54.0 MiB (2.7%) command: plex pid: 488 cpu: 0.2% 2: mem: 32.0 MiB (1.6%) command: plex pid: 638 cpu: 0.1% 3: mem: 17.3 MiB (0.8%) command: plex pid: 783 cpu: 0.1% 4: mem: 16.1 MiB (0.8%) command: php-cgi pid: 573 cpu: 0.0% 5: mem: 16.1 MiB (0.8%) command: smbd pid: 1196 cpu: 0.0% Info: Processes: 156 Uptime: 11h 51m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 287.0 MiB (14.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 132x64 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 1.02 TiB used: 420.31 GiB (40.3%) 
           ID-1: /dev/sda type: USB vendor: Emtec model: X150 120GB size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: V4.7 
           temp: 48 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 112d 6h cycles: 174 read: 57 KiB 
           written: 429 KiB 
           ID-2: /dev/sdb type: USB vendor: Western Digital model: WD10 EZRX-00A8LB0 
           drive model: WD10EZRX-00A8LB0 family: Green size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 01.01A01 temp: 28 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 2y 6d 19h cycles: 3734 Old-Age: 
           UDMA CRC errors: 6949 alert: Bad cable/connection? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 3.86 GiB (3.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/1To_USB raw size: 931.51 GiB size: 915.89 GiB (98.32%) 
           used: 416.40 GiB (45.5%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: f8888c2a-a21f-4800-8183-bf307647d927 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https: //ookla.bintray.com/debian buster main
Processes: CPU top: 5 of 156 
           1: cpu: 1.1% command: smartd pid: 1260 mem: 3.19 MiB (0.1%) 
           2: cpu: 0.5% command: [kworker/0:1-events] pid: 18501 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: packagekitd pid: 1083 mem: 12.7 MiB (0.6%) 
           4: cpu: 0.2% command: plex pid: 488 mem: 54.0 MiB (2.7%) 
           5: cpu: 0.2% command: bash pid: 837 mem: 2.78 MiB (0.1%) 
           Memory top: 5 of 156 
           1: mem: 54.0 MiB (2.7%) command: plex pid: 488 cpu: 0.2% 
           2: mem: 32.0 MiB (1.6%) command: plex pid: 638 cpu: 0.1% 
           3: mem: 17.3 MiB (0.8%) command: plex pid: 783 cpu: 0.1% 
           4: mem: 16.1 MiB (0.8%) command: php-cgi pid: 573 cpu: 0.0% 
           5: mem: 16.1 MiB (0.8%) command: smbd pid: 1196 cpu: 0.0% 
Info:      Processes: 156 Uptime: 11h 51m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.03

Benchmark #27335 - Brand: Emtec X150