Benchmark #27343 - pibenchmarks.com

Brand: VisionTek USB Pocket SSD
SSD (Portable)
#1,151 / 1,675
2
#371 / 1,675
#359 / 984
#35 / 144
8,031
	Amazon.com Amazon.ca Amazon.co.jp Amazon.com.au Amazon.sg

Overview
2020-06-18 07:59:11
#27,343
8,520
+489 (+5.74%)
Anonymous
VisionTek 240GB USB 3.0 Pocket Solid State Drive - 900719

Storage Details
VisionTek USB Pocket SSD
SSD (Portable)
240G
SSD
VisionTek
SSDUSB3.0
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
199 MB/s
255.83 MB/s
277.73 MB/s
11,346 IOPS
23,089 IOPS
45,385 KB/s
92,356 KB/s
27,142 KB/s
27,980 KB/s
18,497 KB/s
31,333 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=5c14b454-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Memory: RAM: total: 7.85 GiB used: 223.3 MiB (2.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 139x56 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Use of uninitialized value in string ne at ./inxi line 9137. Drives: Local Storage: total: 223.57 GiB used: 5.76 GiB (2.6%) ID-1: /dev/sda type: USB model: SSD USB 3.0 240GB size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 604ABBF0 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 32 hrs cycles: 58 read: 117 KiB written: 174 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.76 GiB (98.41%) used: 5.71 GiB (2.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 136 1: cpu: 2.4% command: init pid: 1 mem: 8.00 MiB (0.1%) 2: cpu: 0.5% command: [kworker/0:1-events] pid: 31 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: smartd pid: 1289 mem: 3.13 MiB (0.0%) 4: cpu: 0.4% command: avahi-daemon: pid: 352 mem: 2.45 MiB (0.0%) 5: cpu: 0.2% command: systemd-journald pid: 121 mem: 7.81 MiB (0.0%) Memory top: 5 of 136 1: mem: 12.8 MiB (0.1%) command: packagekitd pid: 1114 cpu: 0.2% 2: mem: 10.5 MiB (0.1%) command: udisksd pid: 350 cpu: 0.1% 3: mem: 8.00 MiB (0.1%) command: init pid: 1 cpu: 2.4% 4: mem: 7.81 MiB (0.0%) command: systemd-journald pid: 121 cpu: 0.2% 5: mem: 7.12 MiB (0.0%) command: systemd pid: 633 cpu: 0.0% Info: Processes: 136 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=5c14b454-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Memory:    RAM: total: 7.85 GiB used: 223.3 MiB (2.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 139x56 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Use of uninitialized value in string ne at ./inxi line 9137.
Drives:    Local Storage: total: 223.57 GiB used: 5.76 GiB (2.6%) 
           ID-1: /dev/sda type: USB model: SSD USB 3.0 240GB size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 604ABBF0 
           temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 32 hrs cycles: 58 read: 117 KiB 
           written: 174 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.76 GiB (98.41%) used: 5.71 GiB (2.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 136 
           1: cpu: 2.4% command: init pid: 1 mem: 8.00 MiB (0.1%) 
           2: cpu: 0.5% command: [kworker/0:1-events] pid: 31 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: smartd pid: 1289 mem: 3.13 MiB (0.0%) 
           4: cpu: 0.4% command: avahi-daemon: pid: 352 mem: 2.45 MiB (0.0%) 
           5: cpu: 0.2% command: systemd-journald pid: 121 mem: 7.81 MiB (0.0%) 
           Memory top: 5 of 136 
           1: mem: 12.8 MiB (0.1%) command: packagekitd pid: 1114 cpu: 0.2% 
           2: mem: 10.5 MiB (0.1%) command: udisksd pid: 350 cpu: 0.1% 
           3: mem: 8.00 MiB (0.1%) command: init pid: 1 cpu: 2.4% 
           4: mem: 7.81 MiB (0.0%) command: systemd-journald pid: 121 cpu: 0.2% 
           5: mem: 7.12 MiB (0.0%) command: systemd pid: 633 cpu: 0.0% 
Info:      Processes: 136 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27343 - Brand: VisionTek USB Pocket SSD