Benchmark #27348 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#61 / 1,701
318
#669 / 1,701
#643 / 990
#167 / 370
6,211
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-18 09:08:24
#27,348
7,452
+1,241 (+16.65%)
rxc
Kingston model: SV300 on Pi4

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
120G
SSD
Kingston
SV300S37A120G
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
161 MB/s
7.76 MB/s
261.91 MB/s
8,626 IOPS
15,375 IOPS
34,507 KB/s
61,501 KB/s
27,988 KB/s
26,120 KB/s
17,781 KB/s
30,738 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d67dd030-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 ipv6.disable=1 Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 296.1 MiB (7.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5") diag: 598mm (23.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 141.60 GiB used: 6.31 GiB (4.5%) ID-1: /dev/mmcblk0 model: FB4HT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0509 drive rev: 583ABBF0 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 211d 15h cycles: 396 read: 1116 GiB written: 1221 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 3.13 GiB (2.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70A2-8001 ID-4: /media/pi/rootfs raw size: 29.56 GiB size: 29.04 GiB (98.24%) used: 3.07 GiB (10.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0409:005a Hub: 1-1.4.4:4 info: ATEN Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 0557:8021 Device-1: 1-1.4.X.X:5 info: Logitech Compact Keyboard K300 type: Keyboard,HID,Mouse driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c31b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 148 1: cpu: 1.4% command: packagekitd pid: 1756 mem: 13.1 MiB (0.3%) 2: cpu: 0.8% command: bash pid: 1605 mem: 2.79 MiB (0.0%) 3: cpu: 0.7% command: xorg pid: 529 mem: 47.5 MiB (1.2%) 4: cpu: 0.5% command: init pid: 1 mem: 7.70 MiB (0.1%) 5: cpu: 0.3% command: pcmanfm pid: 666 mem: 25.8 MiB (0.6%) Memory top: 5 of 148 1: mem: 48.6 MiB (1.2%) command: lxterminal pid: 896 cpu: 0.3% 2: mem: 47.5 MiB (1.2%) command: xorg pid: 529 cpu: 0.7% 3: mem: 28.3 MiB (0.7%) command: lxpanel pid: 664 cpu: 0.2% 4: mem: 25.8 MiB (0.6%) command: pcmanfm pid: 666 cpu: 0.3% 5: mem: 15.3 MiB (0.3%) command: openbox pid: 660 cpu: 0.0% Info: Processes: 148 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d67dd030-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 ipv6.disable=1 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 296.1 MiB (7.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5") 
           diag: 598mm (23.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 141.60 GiB used: 6.31 GiB (4.5%) 
           ID-1: /dev/mmcblk0 model: FB4HT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs 
           size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
           rev: 0509 drive rev: 583ABBF0 temp: 38 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 211d 15h cycles: 396 read: 1116 GiB 
           written: 1221 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 3.13 GiB (2.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot 
           uuid: 70A2-8001 
           ID-4: /media/pi/rootfs raw size: 29.56 GiB size: 29.04 GiB (98.24%) 
           used: 3.07 GiB (10.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0409:005a 
           Hub: 1-1.4.4:4 info: ATEN Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 0557:8021 
           Device-1: 1-1.4.X.X:5 info: Logitech Compact Keyboard K300 type: Keyboard,HID,Mouse 
           driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c31b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 148 
           1: cpu: 1.4% command: packagekitd pid: 1756 mem: 13.1 MiB (0.3%) 
           2: cpu: 0.8% command: bash pid: 1605 mem: 2.79 MiB (0.0%) 
           3: cpu: 0.7% command: xorg pid: 529 mem: 47.5 MiB (1.2%) 
           4: cpu: 0.5% command: init pid: 1 mem: 7.70 MiB (0.1%) 
           5: cpu: 0.3% command: pcmanfm pid: 666 mem: 25.8 MiB (0.6%) 
           Memory top: 5 of 148 
           1: mem: 48.6 MiB (1.2%) command: lxterminal pid: 896 cpu: 0.3% 
           2: mem: 47.5 MiB (1.2%) command: xorg pid: 529 cpu: 0.7% 
           3: mem: 28.3 MiB (0.7%) command: lxpanel pid: 664 cpu: 0.2% 
           4: mem: 25.8 MiB (0.6%) command: pcmanfm pid: 666 cpu: 0.3% 
           5: mem: 15.3 MiB (0.3%) command: openbox pid: 660 cpu: 0.0% 
Info:      Processes: 148 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27348 - Brand: Kingston SSDNow V300