Benchmark #27403 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,679
679
#949 / 1,679
#6 / 94
#9 / 89
4,006
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-19 00:42:26
#27,403
5,488
+1,482 (+27.00%)
Anonymous
OC 1750MHz

Storage Details
Generic USB Disk
USB Flash
223.5G
USB Flash
Generic
GenericFlashDisk
3.00
5,000
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,750 (+250)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
127 MB/s
150.4 MB/s
148.47 MB/s
5,150 IOPS
4,156 IOPS
20,603 KB/s
16,626 KB/s
25,293 KB/s
21,183 KB/s
15,863 KB/s
24,072 KB/s

inxi Results
System: Kernel: 5.4.45-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=1b5780aa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.82 GiB used: 938.1 MiB (24.0%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.45-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 4.01 TiB used: 3.43 TiB (85.5%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: External USB3.0 drive model: HTS547564A9E384 family: /HGST Travelstar 5K750 size: 596.17 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm rev: 0204 drive rev: JEDOA50B temp: 39 C scheme: GPT SMART: yes state: enabled health: PASSED on: 1y 144d 20h cycles: 3900 ID-3: /dev/sdb type: USB vendor: Western Digital model: WD My Book 1140 size: 2.73 TiB block size: physical: 4096 B logical: 4096 B rev: 1012 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-4: /dev/sdc type: USB model: USB3.0 high speed size: 223.57 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-5: /dev/sdd type: USB model: ATA ST500LT012-1DG14 drive model: ST500LT012-1DG142 family: Laptop HDD size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: SDM1 temp: 44 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 41d 3h cycles: 1390 read: 22.47 TiB written: 8.47 TiB Old-Age: g-sense error rate: 316 Pre-Fail: reallocated sector: 100 threshold: 36 attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.51 GiB size: 219.00 GiB (97.98%) used: 95.36 GiB (43.5%) fs: ext4 block size: 4096 B dev: /dev/sdc2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 ID-2: /boot raw size: 29.72 GiB size: 29.70 GiB (99.95%) used: 56.4 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 7EF5-979D ID-3: /media/pi/01D56B4F428C7F70 raw size: 465.76 GiB size: 465.76 GiB (100.00%) used: 436.09 GiB (93.6%) fs: ntfs block size: 4096 B dev: /dev/sdd5 label: N/A uuid: 01D56B4F428C7F70 ID-4: /media/pi/Nunquam Absens raw size: 746.43 GiB size: 746.43 GiB (100.00%) used: 742.47 GiB (99.5%) fs: ntfs block size: 4096 B dev: /dev/sdb3 label: Nunquam Absens uuid: 01CDE0D57F5EAF60 ID-5: /media/pi/Pelita Air Service raw size: 596.17 GiB size: 596.17 GiB (100.00%) used: 309.63 GiB (51.9%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: Pelita Air Service uuid: 01D550099F52F740 ID-6: /media/pi/PhoenixDown raw size: 1.36 TiB size: 1.36 TiB (100.00%) used: 1.25 TiB (91.8%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: PhoenixDown uuid: 749C5D039C5CC172 ID-7: /media/pi/Viridis Pyxidis1 raw size: 650.64 GiB size: 650.64 GiB (100.00%) used: 648.25 GiB (99.6%) fs: ntfs block size: 4096 B dev: /dev/sdb2 label: Viridis Pyxidis uuid: 20D07295D0727140 ID-8: /media/pi/boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) fs: vfat block size: 512 B dev: /dev/sdc1 label: boot uuid: 7EF5-979D Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 4.00 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdd1 size: 1 KiB fs: swap label: N/A uuid: 4450051a-86e0-4832-b2b6-7782fae587d2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.4:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-1:2 info: Genesys Logic ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0626 Device-1: 2-1.1:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:1140 Device-2: 2-1.2:5 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2537:1068 Device-3: 2-2:3 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors: System Temperatures: cpu: 42.8 C mobo: N/A Fan Speeds (RPM): N/A Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable main Processes: CPU top: 5 of 213 1: cpu: 7.1% command: deluged started by: python pid: 1494 mem: 78.1 MiB (2.2%) 2: cpu: 1.5% command: lxpanel pid: 1254 mem: 29.8 MiB (0.8%) 3: cpu: 0.8% command: xorg pid: 1067 mem: 69.1 MiB (2.0%) 4: cpu: 0.7% command: dhcpcd pid: 971 mem: 2.13 MiB (0.0%) 5: cpu: 0.7% command: packagekitd pid: 29811 mem: 12.9 MiB (0.3%) Memory top: 5 of 213 1: mem: 78.1 MiB (2.2%) command: deluged started by: python pid: 1494 cpu: 7.1% 2: mem: 76.0 MiB (2.2%) command: teamviewer pid: 1295 cpu: 0.2% 3: mem: 69.1 MiB (2.0%) command: xorg pid: 1067 cpu: 0.8% 4: mem: 48.8 MiB (1.4%) command: clipit pid: 1312 cpu: 0.0% 5: mem: 39.2 MiB (1.1%) command: light-locker pid: 1309 cpu: 0.0% Info: Processes: 213 Uptime: 18m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 5.4.45-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=1b5780aa-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Memory:    RAM: total: 3.82 GiB used: 938.1 MiB (24.0%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.45-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 4.01 TiB used: 3.43 TiB (85.5%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: External USB3.0 drive model: HTS547564A9E384 
           family: /HGST Travelstar 5K750 size: 596.17 GiB block size: physical: 4096 B 
           logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5400 rpm rev: 0204 drive rev: JEDOA50B temp: 39 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 1y 144d 20h cycles: 3900 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD My Book 1140 size: 2.73 TiB 
           block size: physical: 4096 B logical: 4096 B rev: 1012 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-4: /dev/sdc type: USB model: USB3.0 high speed size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-5: /dev/sdd type: USB model: ATA ST500LT012-1DG14 drive model: ST500LT012-1DG142 
           family: Laptop HDD size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: SDM1 temp: 44 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 41d 3h cycles: 1390 read: 22.47 TiB 
           written: 8.47 TiB Old-Age: g-sense error rate: 316 Pre-Fail: reallocated sector: 100 
           threshold: 36 attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.51 GiB size: 219.00 GiB (97.98%) used: 95.36 GiB (43.5%) fs: ext4 
           block size: 4096 B dev: /dev/sdc2 label: N/A uuid: 139ca52c-d45e-44ca-8b8c-12c0af0c9cf5 
           ID-2: /boot raw size: 29.72 GiB size: 29.70 GiB (99.95%) used: 56.4 MiB (0.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 7EF5-979D 
           ID-3: /media/pi/01D56B4F428C7F70 raw size: 465.76 GiB size: 465.76 GiB (100.00%) 
           used: 436.09 GiB (93.6%) fs: ntfs block size: 4096 B dev: /dev/sdd5 label: N/A 
           uuid: 01D56B4F428C7F70 
           ID-4: /media/pi/Nunquam Absens raw size: 746.43 GiB size: 746.43 GiB (100.00%) 
           used: 742.47 GiB (99.5%) fs: ntfs block size: 4096 B dev: /dev/sdb3 
           label: Nunquam Absens uuid: 01CDE0D57F5EAF60 
           ID-5: /media/pi/Pelita Air Service raw size: 596.17 GiB size: 596.17 GiB (100.00%) 
           used: 309.63 GiB (51.9%) fs: ntfs block size: 4096 B dev: /dev/sda1 
           label: Pelita Air Service uuid: 01D550099F52F740 
           ID-6: /media/pi/PhoenixDown raw size: 1.36 TiB size: 1.36 TiB (100.00%) 
           used: 1.25 TiB (91.8%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: PhoenixDown 
           uuid: 749C5D039C5CC172 
           ID-7: /media/pi/Viridis Pyxidis1 raw size: 650.64 GiB size: 650.64 GiB (100.00%) 
           used: 648.25 GiB (99.6%) fs: ntfs block size: 4096 B dev: /dev/sdb2 
           label: Viridis Pyxidis uuid: 20D07295D0727140 
           ID-8: /media/pi/boot raw size: 63.0 MiB size: 62.0 MiB (98.44%) used: 52.8 MiB (85.1%) 
           fs: vfat block size: 512 B dev: /dev/sdc1 label: boot uuid: 7EF5-979D 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 4.00 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sdd1 size: 1 KiB fs: swap label: N/A 
           uuid: 4450051a-86e0-4832-b2b6-7782fae587d2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.4:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-1:2 info: Genesys Logic ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0626 
           Device-1: 2-1.1:4 info: Western Digital My Book Essential (WDBACW) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:1140 
           Device-2: 2-1.2:5 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2537:1068 Device-3: 2-2:3 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors:   System Temperatures: cpu: 42.8 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable main
Processes: CPU top: 5 of 213 
           1: cpu: 7.1% command: deluged started by: python pid: 1494 mem: 78.1 MiB (2.2%) 
           2: cpu: 1.5% command: lxpanel pid: 1254 mem: 29.8 MiB (0.8%) 
           3: cpu: 0.8% command: xorg pid: 1067 mem: 69.1 MiB (2.0%) 
           4: cpu: 0.7% command: dhcpcd pid: 971 mem: 2.13 MiB (0.0%) 
           5: cpu: 0.7% command: packagekitd pid: 29811 mem: 12.9 MiB (0.3%) 
           Memory top: 5 of 213 
           1: mem: 78.1 MiB (2.2%) command: deluged started by: python pid: 1494 cpu: 7.1% 
           2: mem: 76.0 MiB (2.2%) command: teamviewer pid: 1295 cpu: 0.2% 
           3: mem: 69.1 MiB (2.0%) command: xorg pid: 1067 cpu: 0.8% 
           4: mem: 48.8 MiB (1.4%) command: clipit pid: 1312 cpu: 0.0% 
           5: mem: 39.2 MiB (1.1%) command: light-locker pid: 1309 cpu: 0.0% 
Info:      Processes: 213 Uptime: 18m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27403 - Brand: Generic USB Disk