Benchmark #27454 - pibenchmarks.com

Brand: Samsung SD EVO+ (EB1QT)
C10 U1
#9 / 1,701
1,034
#1,390 / 1,701
#33 / 405
1,092
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-19 13:32:53
#27,454
1,215
+123 (+10.12%)
Anonymous
Samsung MicroSD on Pi 4

Secure Digital (SD) Card Details
Samsung SD EVO+ (EB1QT)
C10 U1
29.6G
SD
Samsung
EB1QT
SDHC
3.00
0x1b
SM
3.0
03/2019
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.2 MB/s
41.22 MB/s
39.74 MB/s
459 IOPS
3,328 IOPS
1,838 KB/s
13,315 KB/s
11,153 KB/s
4,056 KB/s
11,117 KB/s
2,347 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 162.6 MiB (4.1%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 1.85 TiB used: 1.63 GiB (0.1%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 2621 size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 1026 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 29.07 GiB (98.35%) used: 1.58 GiB (5.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 1.82 TiB fs: ntfs label: Elements uuid: C266A34E66A341D1 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2621 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 128 1: cpu: 0.4% command: init pid: 1 mem: 7.98 MiB (0.2%) 2: cpu: 0.1% command: bash pid: 2413 mem: 2.78 MiB (0.0%) 3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) Memory top: 5 of 128 1: mem: 7.98 MiB (0.2%) command: init pid: 1 cpu: 0.4% 2: mem: 6.81 MiB (0.1%) command: systemd-journald pid: 116 cpu: 0.0% 3: mem: 6.54 MiB (0.1%) command: systemd pid: 595 cpu: 0.0% 4: mem: 6.19 MiB (0.1%) command: sshd: pid: 582 cpu: 0.0% 5: mem: 6.04 MiB (0.1%) command: minidlnad pid: 584 cpu: 0.0% Info: Processes: 128 Uptime: 19m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 162.6 MiB (4.1%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 1.85 TiB used: 1.63 GiB (0.1%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 2621 size: 1.82 TiB 
           block size: physical: 512 B logical: 512 B rev: 1026 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 29.07 GiB (98.35%) used: 1.58 GiB (5.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 1.82 TiB fs: ntfs label: Elements uuid: C266A34E66A341D1 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Western Digital type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2621 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 128 
           1: cpu: 0.4% command: init pid: 1 mem: 7.98 MiB (0.2%) 
           2: cpu: 0.1% command: bash pid: 2413 mem: 2.78 MiB (0.0%) 
           3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 128 
           1: mem: 7.98 MiB (0.2%) command: init pid: 1 cpu: 0.4% 
           2: mem: 6.81 MiB (0.1%) command: systemd-journald pid: 116 cpu: 0.0% 
           3: mem: 6.54 MiB (0.1%) command: systemd pid: 595 cpu: 0.0% 
           4: mem: 6.19 MiB (0.1%) command: sshd: pid: 582 cpu: 0.0% 
           5: mem: 6.04 MiB (0.1%) command: minidlnad pid: 584 cpu: 0.0% 
Info:      Processes: 128 Uptime: 19m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27454 - Brand: Samsung SD EVO+ (EB1QT)