Benchmark #27528 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#250 / 1,664
53
#1,230 / 1,664
#21 / 93
#23 / 89
1,326
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2020-06-20 10:11:46
#27,528
2,203
+877 (+39.81%)
Anonymous

Storage Details
Lexar USB Flash Drive
USB Flash
29.6G
USB Flash
Lexar
USBFlashDrive
0x5855
3.00
5,000
21c4:0cd1
0x21c4
0x0cd1
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
24.1 MB/s
116.6 MB/s
122.4 MB/s
2,232 IOPS
2,684 IOPS
8,929 KB/s
10,739 KB/s
12,951 KB/s
7,881 KB/s
10,690 KB/s
9,913 KB/s

inxi Results
System: Host: AL00Pi4 Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 593.8 MiB (14.9%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1280x768 s-dpi: 96 s-size: 338x203mm (13.3x8.0") s-diag: 394mm (15.5") Monitor-1: HDMI-1 res: 1280x720 hz: 60 dpi: 68 size: 476x268mm (18.7x10.6") diag: 546mm (21.5") Monitor-2: HDMI-2 res: 1024x768 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:d9ff:fe88:3eaf/64 scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2408:210:ae0a:a100:d6b0:bfb3:31da:c627/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::d266:aa7f:2a01:4228/64 scope: link IF-ID-3: veth100381f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 116.91.X.X Drives: Local Storage: total: 29.81 GiB used: 10.08 GiB (33.8%) ID-1: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 28.97 GiB (98.01%) used: 5.02 GiB (17.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 69D5-9B27 ID-3: /var/lib/docker/overlay2/3183b42c4644dea891eb0018ff4fa9c2c459c02bec4be8acaf4fc598afb281e6/merged raw size: N/A size: 28.97 GiB used: 5.02 GiB (17.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:4 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1997:2433 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 21c4:0cd1 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 171 1: cpu: 19.1% command: anydesk pid: 2031 mem: 51.7 MiB (1.3%) 2: cpu: 12.7% command: xorg pid: 557 mem: 61.2 MiB (1.6%) 3: cpu: 8.0% command: [w1_bus_master1] pid: 188 mem: 0.00 MiB (0.0%) 4: cpu: 5.1% command: lxterminal pid: 2132 mem: 55.8 MiB (1.4%) 5: cpu: 4.3% command: conky pid: 1246 mem: 8.13 MiB (0.2%) Memory top: 5 of 171 1: mem: 61.2 MiB (1.6%) command: xorg pid: 557 cpu: 12.7% 2: mem: 55.8 MiB (1.4%) command: lxterminal pid: 2132 cpu: 5.1% 3: mem: 55.6 MiB (1.4%) command: dockerd pid: 484 cpu: 1.7% 4: mem: 51.7 MiB (1.3%) command: anydesk pid: 2031 cpu: 19.1% 5: mem: 35.6 MiB (0.9%) command: fcitx pid: 1169 cpu: 1.4% Info: Processes: 171 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.03

inxi Results

System:
  Host: AL00Pi4 Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  snd_bcm2835.enable_headphones=1 cma=256M 
  video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 
  video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
  vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
  Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.89 GiB used: 593.8 MiB (14.9%) gpu: 256.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting 
  unloaded: fbdev display ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 1280x768 s-dpi: 96 s-size: 338x203mm (13.3x8.0") 
  s-diag: 394mm (15.5") 
  Monitor-1: HDMI-1 res: 1280x720 hz: 60 dpi: 68 
  size: 476x268mm (18.7x10.6") diag: 546mm (21.5") 
  Monitor-2: HDMI-2 res: 1024x768 hz: 60 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.118-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
  IP v6: fe80::42:d9ff:fe88:3eaf/64 scope: link 
  IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: 2408:210:ae0a:a100:d6b0:bfb3:31da:c627/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: fe80::d266:aa7f:2a01:4228/64 scope: link 
  IF-ID-3: veth100381f state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-4: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 116.91.X.X 
Drives:
  Local Storage: total: 29.81 GiB used: 10.08 GiB (33.8%) 
  ID-1: /dev/sda type: USB vendor: Lexar model: USB Flash Drive 
  size: 29.81 GiB block size: physical: 512 B logical: 512 B 
  rev: 1100 scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 29.56 GiB size: 28.97 GiB (98.01%) 
  used: 5.02 GiB (17.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 
  label: boot uuid: 69D5-9B27 
  ID-3: /var/lib/docker/overlay2/3183b42c4644dea891eb0018ff4fa9c2c459c02bec4be8acaf4fc598afb281e6/merged raw size: N/A size: 28.97 GiB used: 5.02 GiB (17.3%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
Swap:
  Alert: No Swap data was found. 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.4:4 info: N/A type: Keyboard,Mouse 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s 
  chip ID: 1997:2433 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-2:2 info: N/A type: Mass Storage driver: usb-storage 
  interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 21c4:0cd1 Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list 
  1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 171 
  1: cpu: 19.1% command: anydesk pid: 2031 mem: 51.7 MiB (1.3%) 
  2: cpu: 12.7% command: xorg pid: 557 mem: 61.2 MiB (1.6%) 
  3: cpu: 8.0% command: [w1_bus_master1] pid: 188 mem: 0.00 MiB (0.0%) 
  4: cpu: 5.1% command: lxterminal pid: 2132 mem: 55.8 MiB (1.4%) 
  5: cpu: 4.3% command: conky pid: 1246 mem: 8.13 MiB (0.2%) 
  Memory top: 5 of 171 
  1: mem: 61.2 MiB (1.6%) command: xorg pid: 557 cpu: 12.7% 
  2: mem: 55.8 MiB (1.4%) command: lxterminal pid: 2132 cpu: 5.1% 
  3: mem: 55.6 MiB (1.4%) command: dockerd pid: 484 cpu: 1.7% 
  4: mem: 51.7 MiB (1.3%) command: anydesk pid: 2031 cpu: 19.1% 
  5: mem: 35.6 MiB (0.9%) command: fcitx pid: 1169 cpu: 1.4% 
Info:
  Processes: 171 Uptime: 2m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.03

Benchmark #27528 - Brand: Lexar USB Flash Drive