Benchmark #27579 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A1 (SR32G)
A1 C10 V30 U3
#305 / 1,679
45
#1,291 / 1,679
#173 / 394
1,259
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-21 04:47:11
#27,579
1,272
+13 (+1.02%)
Davince
SanDisk PU SanDisk Ultra 32GB on Pi 4

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A1 (SR32G)
A1 C10 V30 U3
29.5G
SD
SanDisk
SR32G
SDHC
6.00
0x03
SD
8.0
10/2019
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
37.6 MB/s
40.44 MB/s
36.98 MB/s
1,001 IOPS
2,899 IOPS
4,006 KB/s
11,596 KB/s
8,938 KB/s
1,897 KB/s
7,340 KB/s
2,754 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 322.3 MiB (8.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 140x45 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 5.03 TiB used: 1.43 TiB (28.4%) ID-1: /dev/mmcblk0 model: SR32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: Expansion Desk size: 4.55 TiB block size: physical: 4096 B logical: 512 B rev: 9401 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. ID-3: /dev/sdb type: USB vendor: Seagate model: ST500LM012 HN-M500MBB family: Seagate SpinPoint M8 (AF) size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm rev: 0409 drive rev: 2AR10001 temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED on: 10d 20h cycles: 2301 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.62 GiB (9.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /home//Lin5 raw size: 931.90 GiB size: 916.28 GiB (98.32%) used: 198.94 GiB (21.7%) fs: ext4 block size: 4096 B dev: /dev/sda6 label: Lin5 uuid: bc5ded10-bc0b-4b56-b1d4-d90d7b8a335b ID-4: /home//Mac1 raw size: 462.39 GiB size: 462.39 GiB (100.00%) used: 352.48 GiB (76.2%) fs: hfsplus block size: 4096 B dev: /dev/sda2 label: p1Mac uuid: 87d5e427-f5aa-34f7-8b76-37dfb569eee1 ID-5: /home//Mac2 raw size: 933.19 GiB size: 933.19 GiB (100.00%) used: 674.35 GiB (72.3%) fs: hfsplus block size: 4096 B dev: /dev/sda3 label: p2Mac uuid: 49ff1ab0-4083-378a-b102-ab16e4c53419 ID-6: /home//Mac3 raw size: 465.66 GiB size: 465.66 GiB (100.00%) used: 233.00 GiB (50.0%) fs: hfsplus block size: 4096 B dev: /dev/sda4 label: p3Mac uuid: a6c46cf6-3143-31c2-a0ca-101d9019626a ID-7: /home//Mac4 raw size: 931.32 GiB size: 931.32 GiB (100.00%) used: 553.0 MiB (0.1%) fs: hfsplus block size: 4096 B dev: /dev/sda5 label: p4Mac uuid: 11fc8e69-4b70-3bf3-974a-847000697ab8 ID-8: /home//NetworkDrive raw size: N/A size: 917.07 GiB used: 631.33 GiB (68.8%) fs: cifs remote: //192.168.X.X/NetworkDrive label: N/A uuid: N/A ID-9: /home//Win6 raw size: 932.37 GiB size: 932.37 GiB (100.00%) used: 41.5 MiB (0.0%) fs: exfat block size: 4096 B dev: /dev/sda7 label: p6Win uuid: 59AC-5AB0 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 3.5 MiB (3.5%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED ID-2: /dev/sdb1 size: 465.76 GiB fs: exfat label: Seagate uuid: 5585-B8EA USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:4 info: Seagate RSS LLC type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:a013 Device-2: 2-2:2 info: Seagate RSS LLC SRD0NF2 [Expansion Desktop Drive] type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:3322 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 147 1: cpu: 0.6% command: smartd pid: 17014 mem: 3.12 MiB (0.0%) 2: cpu: 0.3% command: sshd: pid: 16611 mem: 5.96 MiB (0.1%) 3: cpu: 0.3% command: bash pid: 16649 mem: 2.74 MiB (0.0%) 4: cpu: 0.1% command: sshd: pid: 16621 mem: 3.96 MiB (0.1%) 5: cpu: 0.1% command: -bash pid: 16624 mem: 3.42 MiB (0.0%) Memory top: 5 of 147 1: mem: 25.1 MiB (0.6%) command: systemd-journald pid: 120 cpu: 0.0% 2: mem: 6.48 MiB (0.1%) command: init pid: 1 cpu: 0.0% 3: mem: 6.10 MiB (0.1%) command: smbd pid: 648 cpu: 0.0% 4: mem: 5.96 MiB (0.1%) command: sshd: pid: 16611 cpu: 0.3% 5: mem: 3.96 MiB (0.1%) command: sshd: pid: 16621 cpu: 0.1% Info: Processes: 147 Uptime: 38d 15m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 322.3 MiB (8.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 140x45 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 5.03 TiB used: 1.43 TiB (28.4%) 
           ID-1: /dev/mmcblk0 model: SR32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: Expansion Desk size: 4.55 TiB 
           block size: physical: 4096 B logical: 512 B rev: 9401 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST500LM012 HN-M500MBB 
           family: Seagate SpinPoint M8 (AF) size: 465.76 GiB block size: physical: 4096 B 
           logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm rev: 0409 
           drive rev: 2AR10001 temp: 35 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 10d 20h cycles: 2301 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.62 GiB (9.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /home//Lin5 raw size: 931.90 GiB size: 916.28 GiB (98.32%) 
           used: 198.94 GiB (21.7%) fs: ext4 block size: 4096 B dev: /dev/sda6 label: Lin5 
           uuid: bc5ded10-bc0b-4b56-b1d4-d90d7b8a335b 
           ID-4: /home//Mac1 raw size: 462.39 GiB size: 462.39 GiB (100.00%) 
           used: 352.48 GiB (76.2%) fs: hfsplus block size: 4096 B dev: /dev/sda2 label: p1Mac 
           uuid: 87d5e427-f5aa-34f7-8b76-37dfb569eee1 
           ID-5: /home//Mac2 raw size: 933.19 GiB size: 933.19 GiB (100.00%) 
           used: 674.35 GiB (72.3%) fs: hfsplus block size: 4096 B dev: /dev/sda3 label: p2Mac 
           uuid: 49ff1ab0-4083-378a-b102-ab16e4c53419 
           ID-6: /home//Mac3 raw size: 465.66 GiB size: 465.66 GiB (100.00%) 
           used: 233.00 GiB (50.0%) fs: hfsplus block size: 4096 B dev: /dev/sda4 label: p3Mac 
           uuid: a6c46cf6-3143-31c2-a0ca-101d9019626a 
           ID-7: /home//Mac4 raw size: 931.32 GiB size: 931.32 GiB (100.00%) 
           used: 553.0 MiB (0.1%) fs: hfsplus block size: 4096 B dev: /dev/sda5 label: p4Mac 
           uuid: 11fc8e69-4b70-3bf3-974a-847000697ab8 
           ID-8: /home//NetworkDrive raw size: N/A size: 917.07 GiB 
           used: 631.33 GiB (68.8%) fs: cifs remote: //192.168.X.X/NetworkDrive label: N/A 
           uuid: N/A 
           ID-9: /home//Win6 raw size: 932.37 GiB size: 932.37 GiB (100.00%) 
           used: 41.5 MiB (0.0%) fs: exfat block size: 4096 B dev: /dev/sda7 label: p6Win 
           uuid: 59AC-5AB0 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 3.5 MiB (3.5%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED 
           ID-2: /dev/sdb1 size: 465.76 GiB fs: exfat label: Seagate uuid: 5585-B8EA 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:4 info: Seagate RSS LLC type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:a013 Device-2: 2-2:2 info: Seagate RSS LLC SRD0NF2 [Expansion Desktop Drive] 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:3322 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 147 
           1: cpu: 0.6% command: smartd pid: 17014 mem: 3.12 MiB (0.0%) 
           2: cpu: 0.3% command: sshd: pid: 16611 mem: 5.96 MiB (0.1%) 
           3: cpu: 0.3% command: bash pid: 16649 mem: 2.74 MiB (0.0%) 
           4: cpu: 0.1% command: sshd: pid: 16621 mem: 3.96 MiB (0.1%) 
           5: cpu: 0.1% command: -bash pid: 16624 mem: 3.42 MiB (0.0%) 
           Memory top: 5 of 147 
           1: mem: 25.1 MiB (0.6%) command: systemd-journald pid: 120 cpu: 0.0% 
           2: mem: 6.48 MiB (0.1%) command: init pid: 1 cpu: 0.0% 
           3: mem: 6.10 MiB (0.1%) command: smbd pid: 648 cpu: 0.0% 
           4: mem: 5.96 MiB (0.1%) command: sshd: pid: 16611 cpu: 0.3% 
           5: mem: 3.96 MiB (0.1%) command: sshd: pid: 16621 cpu: 0.1% 
Info:      Processes: 147 Uptime: 38d 15m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27579 - Brand: SanDisk SD Extreme Pro A1 (SR32G)